CHARACTERISATION OF THE TENSILE BEHAVIOUR OF UHPFRC BY MEANS OF FOUR-POINT BENDING TESTS

Combining the most recent technologies in concrete, Ultra-High-Performance Fibre-Reinforced Concrete (UHPFRC) arises as a promising material for the near future. UHPFRC have shown how flexible concrete can be to adapt to the ever-changing social and environmental demands. With its high flexibility composition and its mechanical properties, UHPFRC is full of both unexplored and unexploited possibilities. Engineers should take responsibility for this task. However, it is fair to acknowledge that this is not an easy task and it requires the development of reliable and widely accepted design standards provided by the scientific community. A major concern about durability, long-lasting structures and reduction of maintenance cost, as well as the development of new concrete technologies, improved knowledge of fibre effect and a huge growth in the fibre industry accompanied by fibre price reduction have led, among other factors, to the development of new types of concrete whose mechanical behaviour substantially differs from conventional fibre-reinforced concrete. This is why current characterisation methodologies and design standards must be reviewed and adjusted to these newer materials. However, design standard revision cannot disregard former milestones achieved thanks to decades of hard work. It must offer an integrated view in which new types of concrete comprise existing ones in a broader group, because at the end of the day and despite having newer and improved properties, new types of concrete are still concrete. That is how it should be understood and how it must be reflected in newer codes and standards. The work presented herein is focused on one of these recently developed materials that embraces major advanced technologies in concrete: Ultra-High-Performance Fibre-Reinforced Concrete (UHPFRC). This work is specifically focused on those crucial requirements for the development and widespread use of it, such as constitutive tensile characterisation and classification. This work includes a deep revision of the uniaxial tensile behaviour of concrete and its development as fibre technology has evolved. In addition, traditional characterisation standard methods as well as those recently developed for its specific use on UHPFRC are reviewed and called into question. Throughout the document, the development of different methodologies to determine the uniaxial constitutive tensile behaviour of UHPFRC from bending tests are shown, together with a simplified characterisation proposal specially developed for being included in a standard. All developed methodologies presented herein are checked and validated. These methods are specifically designed for their application on experimental results obtained from a special type of four-point bending test, whose standardisation proposal for UHPFRC is also shown. Finally, a classification proposal is presented as a function of more relevant UHPFRC tensile parameters necessary for design that can be directly obtained from the standard characterisation test method suggested. Proposed classification encompasses the existing classification for conventional reinforced and fibre-reinforced concrete. In it, both plain concrete and fibre-reinforced concrete are presented as a particular case of a more general tensile constitutive response for concrete. Standard methodology and classification proposed are in accordance with the evolution of concrete and unify historic milestones achieved by the international research community.El Hormigón de Muy Alto Rendimiento (HMAR) combina los últimos avances tecnológicos en hormigón y se erige como un material prometedor para el futuro. El HMAR ha demostrado su gran capacidad para adaptarse a las cada vez más exigentes demandas sociales y medioambientales. Con un gran abanico de posibilidades en su dosificación para conseguir las propiedades mecánicas deseadas, el HMAR es un material lleno de posibilidades aún sin explorar y sin explotar. Los ingenieros tienen la responsabilidad de esta tarea. Sin embargo, es justo reconocer que no se trata de una tarea fácil y que requiere de un desarrollo previo de códigos de diseño adecuados y ampliamente aceptados por parte de la comunidad científica. La aparición de nuevas tecnologías, el mayor conocimiento sobre la aportación de las fibras así como su industrialización y bajada de precios, las mayores preocupaciones sobre la durabilidad estructural, incremento de la vida útil o la reducción de los costes de mantenimiento, entre otros factores, han derivado en el desarrollo de nuevas tipologías de hormigones cuyo comportamiento mecánico difiere de manera sustancial de los tradicionales hormigones con fibras. Es por ello que tanto la readaptación de las metodologías de caracterización como las metodologías de diseño deben ser reformuladas. Y esto debe hacerse de manera no disruptiva, es decir, manteniendo la línea de los hitos alcanzados en los hormigones con fibras convencionales de manera que queden integrados en metodologías de caracterización y de diseño que los engloben, porque al fin y al cabo, y aunque con nuevas y mejores propiedades mecánicas, los nuevos hormigones siguen siendo hormigones. Así debe ser entendido y así debe quedar reflejado en las nuevas normativas. El presente trabajo se centra en uno de esos nuevos materiales desarrollados con el avance de las nuevas tecnologías como es el HMAR. En especial, este documento se centra en ese aspecto tan fundamental para el desarrollo de nuevos hormigones como es la caracterización mecánica y la tipificación. Este trabajo incluye una revisión del comportamiento mecánico uniaxial a tracción del hormigón y de su evolución con la aparición de las diferentes tecnologías. Además, se revisan y se ponen en cuestión los sistemas tradicionales de caracterización, así como los nuevos sistemas desarrollados en los últimos años para su empleo específico en el HMAR. A lo largo del documento se desarrollan diferentes metodologías para la obtención del comportamiento constitutivo a tracción del HMAR, así como la propuesta de una metdología simplificada de caracterización especialmente diseñada para ser incluida en una norma, todas ellas debidamente validadas. Estas metodologías son de aplicación específica a los resultados experimentales obtenidos mediante un ensayo a cuatro puntos sin entalla, cuya propuesta de estandarización para el HMAR ha sido también desarrollada. Finalmente, se presenta una propuesta de tipificación de acuerdo a los parámetros más relevantes del comportamiento a tracción del HMAR que son necesarios para el diseño y que pueden ser directamente obtenidos del ensayo de caracterización propuesto. Esta clasificación engloba a la clasificación existente para el hormigón armado convencional y los actuales hormigones con fibras, de manera que se presenta la actual definición de hormigón con fibras como un caso particular de estos nuevos hormigones, respetando al máximo la evolución de este material y aunando los logros conseguidos por la comunidad científica.Dins de les combinacions de les tecnologies més recents en el formigó, el formigó de molt alt rendiment (UHPFRC) sorgeix com un material prometedor per al futur pròxim. L'UHPFRC ha demostrat poder ser un formigó flexible per adaptar-se a les sempre canviants demandes socials i mediambientals. Amb una gran flexibilitat en la seua composició i les seues propietats mecàniques, l`UHPFRC està ple de possibilitats de ser explorades i explotades. Els enginyers han de prendre la responsabilitat d'aquesta tasca. No obstant això, és just reconèixer que això no serà fàcil i requerirà el desenvolupament de normes de disseny fiables i àmpliament acceptades per la comunitat científica. Hi ha una gran preocupació al voltant de la durabilitat, la vida útil de les estructures i la reducció del cost de manteniment, juntament amb el desenvolupament de noves tecnologies de formigó, un millor coneixement de l'efecte de la fibra i un enorme creixement en la indústria de la fibra acompanyat per la reducció del preu de la fibra, han conduït, entre altres factors, al desenvolupament de nous tipus de formigons, el comportament mecànic dels quals es diferencia substancialment dels formigons reforçats amb fibres convencionals. És per això que les metodologies de caracterització actuals i les normes de disseny han de ser revisades i ajustades a aquests nous materials. No obstant això, la revisió del codis de disseny no pot prescindir de les antigues fites aconseguides gràcies a dècades de treball dur. S'ha d'oferir una visió integrada en la qual els nous tipus de formigons integren els ja existents en un grup més ampli, ja que, al cap i la fi i malgrat tenir propietats noves i millorades, els nous tipus de formigons són encara un tipus de formigó. Així es com s'hauria d'entendre i reflectir-se en els nous codis i normes. El treball presentat en aquest document es centra en un d'aquests materials que s'han desenvolupat recentment i que abasta les principals tecnologies avançades en el formigó: el Formigó de Molt Alt Rendiment Reforçat amb Fibres (UHPFRC). Aquest treball se centra específicament en els requisits fonamentals per al desenvolupament i l'ús generalitzat d'aquest, com ara la caracterització i classificació del comportament constitutiu a tracció. Aquest treball inclou una revisió profunda del comportament a tracció uniaxial del formigó i els seus canvis al temps que la tecnologia de les fibres ha evolucionat. A més, els mètodes tradicionals estàndard de caracterització, així com els recentment desenvolupats per al seu ús específic en l'UHPFRC són revisats i qüestionats. Al llarg del document, es mostra el desenvolupament de diferents metodologies per a determinar el comportament constitutiu a tracció uniaxial de l'UHPFRC, juntament amb una proposta de caracterització simplificada especialment desenvolupada per poder ser inclosa en normativa. Totes les metodologies desenvolupades presentades en aquest document han estat comprovades i validades. Aquests mètodes estan dissenyats específicament per a la seva aplicació en els resultats experimentals obtinguts a partir d'un tipus especial d'assaig de flexió a quatre punts, a més també s'inclou una proposta d'estandardització per a l'UHPFRC. Finalment, es presenta una proposta de classificació en funció dels paràmetres més rellevants del comportament a tracció de l'UHPFRC que són necessaris per al disseny i que es poden obtindre directament del mètode d'assaig estàndard suggerit per a la caracterització de l'UHPFRC. La classificació proposada té amb compte la classificació existent per al formigó armat convencional i el reforçat amb fibres. En ella, tant el formigó en massa com el formigó reforçat amb fibres es presenten com un cas particular d'una resposta constitutiva a tracció més general per al formigó. La metodologia estàndard i la classificació proposada estan d'acord amb l'evolució de formigó i unifica lLópez Martínez, JÁ. (2017). CHARACTERISATION OF THE TENSILE BEHAVIOUR OF UHPFRC BY MEANS OF FOUR-POINT BENDING TESTS [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/79740TESI

Characterization of electrical crosstalk in 4T-APS arrays using TCAD simulations

TCAD simulations have been conducted on a CMOS image sensor in order to characterize the electrical component of the crosstalk between pixels through the study of the electric field distribution. The image sensor consists on a linear array of five pinned photodiodes (PPD) with their transmission gates, floating diffusion and reset transistors. The effect of the variations of the thickness of the epitaxial layer has been addressed as well. In fact, the depth of the boundary of the epitaxial layer affects quantum efficiency (QE) so a correlation with crosstalk has been identified.Ministerio de Economía y Competitividad TEC2015-66878-C3-1RJunta de Andalucía TIC 2012-2338Office of Naval Research (USA) N00014141035

Incorporating boundary conditions in a stochastic volatility model for the numerical approximation of bond prices

Producción CientíficaIn this paper, we consider a two-factor interest rate model with stochastic volatil-ity, and we assume that the instantaneous interest rate follows a jump-diffusionprocess. In this kind of problems, a two-dimensional partial integro-differentialequation is derived for the values of zero-coupon bonds. To apply standardnumerical methods to this equation, it is customary to consider a boundeddomain and incorporate suitable boundary conditions. However, for thesetwo-dimensional interest rate models, there are not well-known boundary con-ditions, in general. Here, in order to approximate bond prices, we propose newboundary conditions, which maintain the discount function property of thezero-coupon bond price. Then, we illustrate the numerical approximation ofthe corresponding boundary value problem by means of an alternative directionimplicit method, which has been already applied for pricing options. We testthese boundary conditions with several interest rate pricing models.MEC-FEDER Grant MTM2017-85476-C2-P, Junta de Castilla y León Regional Grants VA041P17 (with European FEDERFunds), VA138G18 y VA148G1

Spatial distribution of HD-EMG improves identification of task and force in patients with incomplete spinal cord injury

Background: Recent studies show that spatial distribution of High Density surface EMG maps (HD-EMG) improves the identification of tasks and their corresponding contraction levels. However, in patients with incomplete spinal cord injury (iSCI), some nerves that control muscles are damaged, leaving some muscle parts without an innervation. Therefore, HD-EMG maps in patients with iSCI are affected by the injury and they can be different for every patient. The objective of this study is to investigate the spatial distribution of intensity in HD-EMG recordings to distinguish co-activation patterns for different tasks and effort levels in patients with iSCI. These patterns are evaluated to be used for extraction of motion intention.; Method: HD-EMG was recorded in patients during four isometric tasks of the forearm at three different effort levels. A linear discriminant classifier based on intensity and spatial features of HD-EMG maps of five upper-limb muscles was used to identify the attempted tasks. Task and force identification were evaluated for each patient individually, and the reliability of the identification was tested with respect to muscle fatigue and time interval between training and identification. Results: Three feature sets were analyzed in the identification: 1) intensity of the HD-EMG map, 2) intensity and center of gravity of HD-EMG maps and 3) intensity of a single differential EMG channel (gold standard).; Results show that the combination of intensity and spatial features in classification identifies tasks and effort levels properly (Acc = 98.8 %; S = 92.5 %; P = 93.2 %; SP = 99.4 %) and outperforms significantly the other two feature sets (p < 0.05).; Conclusion: In spite of the limited motor functionality, a specific co-activation pattern for each patient exists for both intensity, and spatial distribution of myoelectric activity. The spatial distribution is less sensitive than intensity to myoelectric changes that occur due to fatigue, and other time-dependent influences.Peer ReviewedPostprint (published version

An Experimentally-Validated Verilog-A SPAD Model Extracted from TCAD Simulation

Single-photon avalanche diodes (SPAD) are photodetectors with exceptional characteristics. This paper proposes a new approach to model them in Verilog-A HDL with the help of a powerful tool: TCAD simulation. Besides, to the best of our knowledge, this is first model to incorporate a trap-assisted tunneling mechanism, a cross-section temperature dependence of the traps, and the self-heating effect. Comparison with experimental data establishes the validity of the model.Junta de Andalucía TIC 2012-2338Ministerio de Economía y Competitividad TEC2015-66878-C3-1-ROffice of Naval Research (USA) N00014141035

Prediction of isometric motor tasks and effort levels based on high-density EMG in patients with incomplete spinal cord injury

Objective. The development of modern assistive and rehabilitation devices requires reliable and easy-to-use methods to extract neural information for control of devices. Group-specific pattern recognition identifiers are influenced by inter-subject variability. Based on high-density EMG (HD-EMG) maps, our research group has already shown that inter-subject muscle activation patterns exist in a population of healthy subjects. The aim of this paper is to analyze muscle activation patterns associated with four tasks (flexion/extension of the elbow, and supination/pronation of the forearm) at three different effort levels in a group of patients with incomplete Spinal Cord Injury (iSCI). Approach. Muscle activation patterns were evaluated by the automatic identification of these four isometric tasks along with the identification of levels of voluntary contractions. Two types of classifiers were considered in the identification: linear discriminant analysis and support vector machine. Main results. Results show that performance of classification increases when combining features extracted from intensity and spatial information of HD-EMG maps (accuracy = 97.5%). Moreover, when compared to a population with injuries at different levels, a lower variability between activation maps was obtained within a group of patients with similar injury suggesting stronger task-specific and effort-level-specific co-activation patterns, which enable better prediction results. Significance. Despite the challenge of identifying both the four tasks and the three effort levels in patients with iSCI, promising results were obtained which support the use of HD-EMG features for providing useful information regarding motion and force intentionPeer ReviewedPostprint (author's final draft

Relación entre jarositas de ambientes naturales y sus análogos sintéticos

Depto. de Mineralogía y PetrologíaFac. de Ciencias GeológicasTRUEpu

Effect of pH and nanoclay content on the morphology and physicochemicalproperties of soy protein/montmorillonite nanocomposite obtained byextrusion

The present work attempts to clarify the influence of montmorillonite nanoclay content and pH on the me-chanical properties of extruded soy protein nanocomposites. The mechanical behaviour is dominated by theformation of positive synergies between protein and nanoclay above a nanoclay concentration threshold.Moreover, the presence of nanoclay can improve water uptake. The pH also exerts a strong influence on me-chanical and water absorption properties, although montmorillonite tend to reduce this effect.Eventually, this study put forward the feasibility of using a combination of soy protein and montmorillonite toobtain potentially attractive biodegradable nanocomposite materials, processed by means of a simple and easilyscalable twin-screw extruder.Junta de Andalucía (project TEP-6134)Ministerio de Economía y Competitividad (CTQ2015-71164-P

Business Process Configuration According to Data Dependency Specification

Configuration techniques have been used in several fields, such as the design of business process models. Sometimes these models depend on the data dependencies, being easier to describe what has to be done instead of how. Configuration models enable to use a declarative representation of business processes, deciding the most appropriate work-flow in each case. Unfortunately, data dependencies among the activities and how they can affect the correct execution of the process, has been overlooked in the declarative specifications and configurable systems found in the literature. In order to find the best process configuration for optimizing the execution time of processes according to data dependencies, we propose the use of Constraint Programming paradigm with the aim of obtaining an adaptable imperative model in function of the data dependencies of the activities described declarative.Ministerio de Ciencia y Tecnología TIN2015-63502-C3-2-RFondo Europeo de Desarrollo Regiona

Ley de Dependencia: De la fragilidad de los servicios a la necesidad de la prestación económica

La Ley de Promoción de la Autonomía Personal y Atención a las Personas en Situación de Dependencia establece como prioritario la concesión de servicios frente a las prestaciones económicas. Sin embargo, la prestación económica de cuidados en el entorno familiar y apoyo a cuidadores no profesionales ha pasado de ser la excepción a la norma (incumpliendo el mandato y el espíritu de la ley), remunerando económicamente las atenciones que prestan las familias a sus miembros en situación de dependencia. En un escenario de crisis económica, de disminución de ayudas de protección social y alto desempleo se puede estar transformando en una renta básica que está permitiendo cubrir, junto a las pensiones de las personas mayores, las necesidades primordiales de las unidades familiares que se encuentran en situación económica precaria, pudiendo, en ocasiones, producir un detrimento de la adecuada atención del titular del derecho