506 research outputs found
Dynamic simulation of N2O emissions from a full-scale partial nitritation reactor
This study deals with the potential and the limitations of dynamic models for describing and predicting nitrous oxide (N2O) emissions associated with biological nitrogen removal from wastewater. The results of a three-week monitoring campaign on a full-scale partial nitritation reactor were reproduced through a state-of-the-art model including different biological N2O formation pathways. The partial nitritation reactor under study was a SHARON reactor treating the effluent from a municipal wastewater treatment plant sludge digester. A qualitative and quantitative comparison between experimental data and simulation results was performed to identify N2O formation pathways as well as for model identification. Heterotrophic denitrifying bacteria and ammonium oxidizing bacteria (AOB) were responsible for N2O formation under anoxic conditions, whereas under aerated conditions the AOB were the most important N2O producers. Relative to previously proposed models, hydroxylamine (NH2OH) had to be included as a state variable in the AOB conversions in order to describe potential N2O formation by AOB under anoxic conditions. An oxygen inhibition term in the corresponding reaction kinetics was required to fairly represent the relative contribution of the different AOB pathways for N2O production. Nevertheless, quantitative prediction of N2O emissions with models remains a challenge, which is discussed
A critical review of resource recovery from municipal wastewater treatment plants : market supply potentials, technologies and bottlenecks
In recent decades, academia has elaborated a wide range of technological solutions to recover water, energy, fertiliser and other products from municipal wastewater treatment plants. Drivers for this work range from low resource recovery potential and cost effectiveness, to the high energy demands and large environmental footprints of current treatment-plant designs. However, only a few technologies have been implemented and a shift from wastewater treatment plants towards water resource facilities still seems far away. This critical review aims to inform decision-makers in water management utilities about the vast technical possibilities and market supply potentials, as well as the bottlenecks, related to the design or redesign of a municipal wastewater treatment process from a resource recovery perspective. Information and data have been extracted from literature to provide a holistic overview of this growing research field. First, reviewed data is used to calculate the potential of 11 resources recoverable from municipal wastewater treatment plants to supply national resource consumption. Depending on the resource, the supply potential may vary greatly. Second, resource recovery technologies investigated in academia are reviewed comprehensively and critically. The third section of the review identifies nine non-technical bottlenecks mentioned in literature that have to be overcome to successfully implement these technologies into wastewater treatment process designs. The bottlenecks are related to economics and value chain development, environment and health, and society and policy issues. Considering market potentials, technological innovations, and addressing potential bottlenecks early in the planning and process design phase, may facilitate the design and integration of water resource facilities and contribute to more circular urban water management practices
The SPPD-WRF framework : a novel and holistic methodology for strategical planning and process design of water resource factories
This paper guides decision making in more sustainable urban water management practices that feed into a circular economy by presenting a novel framework for conceptually designing and strategically planning wastewater treatment processes from a resource recovery perspective. Municipal wastewater cannot any longer be perceived as waste stream because a great variety of technologies are available to recover water, energy, fertilizer, and other valuable products from it. Despite the vast technological recovery possibilities, only a few processes have yet been implemented that deserve the name water resource factory instead of wastewater treatment plant. This transition relies on process designs that are not only technically feasible but also overcome various non-technical bottlenecks. A multidimensional and multidisciplinary approach is needed to design water resource factories (WRFs) in the future that are technically feasible, cost effective, show low environmental impacts, and successfully market recovered resources. To achieve that, the wastewater treatment plant (WWTP) design space needs to be opened up for a variety of expertise that complements the traditional wastewater engineering domain. Implementable WRF processes can only be designed if the current design perspective, which is dominated by the fulfilment of legal effluent qualities and process costs, is extended to include resource recovery as an assessable design objective from an early stage on. Therefore, the framework combines insights and methodologies from different fields and disciplines beyond WWTP design like, e.g., circular economy, industrial process engineering, project management, value chain development, and environmental impact assessment. It supports the transfer of the end-of-waste concept into the wastewater sector as it structures possible resource recovery activities according to clear criteria. This makes recovered resources more likely to fulfil the conditions of the end-of-waste concept and allows the change in their definition from wastes to full-fledged products
Del MA al mar. El museo de la historia de AndalucĂa
Un edificio fuerte y radical evocará en su seno la semblanza de una comunidad con un rico pasado cultural que se proyecta hacia el futuro. El arquitecto explica las claves de este centro, levantado en Granada
Stratification of nitrifier guilds in granular sludge in relation to nitritation
A lab-scale partial nitritation granular sludge air-lift reactor was operated in continuous mode treating low strength synthetic medium (influent ca. 50 mg-N-NH /L). Granules were initially stratified with AOB in the external shell and NOB in the inner core at 20 °C. Once temperature was decreased progressively from 20 °C to 15 °C, nitrate production was initially observed during several weeks. However, by maintaining relatively high ammonium concentrations in the liquid (ca. 28 mg-N-NH /L), effluent nitrate concentrations in the reactor decreased in time and process performance was recovered. Batch tests were performed in the reactor at different conditions. To understand the experimental results an existing one-dimensional biofilm model was used to simulate batch tests and theoretically assess the impact of stratification, dissolved oxygen (DO) and short-term effects of temperature on time course concentrations of ammonium, nitrite and nitrate. This theoretical assessment served to develop an experimental methodology for the evaluation of in-situ batch tests in the partial nitritation reactor. These batch tests proved to be a powerful tool to easily monitor the extent of stratification of nitrifier guilds in granular sludge and to determine the required bulk ammonium concentration to minimize nitrite oxidation. When nitrifier guilds were stratified in the granular sludge, a higher bulk ammonium concentration was required to efficiently repress NOB at lower temperature (ca. 19 versus 7 mg-N-NH /L at 15 and 20 °C, respectively)
Modelling nitrous and nitric oxide emissions by autotrophic ammonia-oxidizing bacteria
The emission of greenhouse gases, such as N2O, from wastewater treatment plants is a matter of growing concern. Denitrification by ammonia-oxidizing bacteria (AOB) has been identified as the main N2O producing pathway. To estimate N2O emissions during biological nitrogen removal, reliable mathematical models are essential. In this work, a mathematical model for NO (a precursor for N2O formation) and N2O formation by AOB is presented. Based on mechanistic grounds, two possible reaction mechanisms for NO and N2O formation are distinguished, which differ in the origin of the reducing equivalents needed for denitrification by AOB. These two scenarios have been compared in a simulation study, assessing the influence of the aeration/stripping rate and the resulting dissolved oxygen (DO) concentration on the NO and N2O emission from a SHARON partial nitritation reactor. The study of the simulated model behavior and its comparison with previously published experimental data serves in elucidating the true NO and N2O formation mechanism
Evaluating the potential for nitrate reduction through DNRA by anammox bacteria for municipal wastewater treatment
Biological removal processes in aerobic granular sludge exposed to diclofenac
Diclofenac is a worldwide consumed drug included in the watch list of substances to be monitored according to the European Union Water Framework Directive (Directive 2013/39/EU). Aerobic granular sludge sequencing batch reactors (AGS-SBR) are increasingly used for wastewater treatment but there is scant information on the fate and effect of micropollutants to nutrient removal processes. An AGS-SBR fed with synthetic wastewater containing diclofenac was bioaugmented with a diclofenac degrading bacterial strain and performance and microbial community dynamics was analysed. Chemical oxygen demand, phosphate and ammonia removal were not affected by the micropollutant at 0.03 mM (9.54 mg L-1). The AGS was able to retain the degrading strain, which was detected in the sludge throughout after augmentation. Nevertheless, besides some adsorption to the biomass, diclofenac was not degraded by the augmented sludge given the short operating cycles and even if batch degradation assays confirmed that the bioaugmented AGS was able to biodegrade the compound. The exposure to the pharmaceutical affected the microbial community of the sludge, separating the two first phases of reactor operation (acclimatization and granulation) from subsequent phases. The AGS was able to keep the bioaugmented strain and to maintain the main functions of nutrient removal even through the long exposure to the pharmaceutical, but combined strategies are needed to reduce the spread of micropollutants in the environment.info:eu-repo/semantics/acceptedVersio
- …