Readout and performance of thick CZT strip detectors with orthogonal coplanar anodes

We report progress in the study of CZT strip detectors featuring orthogonal coplanar anode contacts. The work includes laboratory and simulation studies aimed at optimizing and developing compact, efficient, high performance detector modules for 0.05 to 1 MeV gamma radiation measurements. The novel coplanar anode strip configuration retains many of the performance advantages of pixel detectors yet requires far fewer electronic channels to perform both 3-d imaging and spectroscopy. We report on studies aimed at determining an optimum configuration of the analog signal processing electronics to employ with these detectors. We report measurements of energy and spatial resolution in three dimensions for prototype 5 and 10 mm thick CZT detectors using a set of shaping and summing amplifiers

A fast scintillator Compton telescope for medium-energy gamma-ray astronomy

The field of medium-energy gamma-ray astronomy urgently needs a new mission to build on the success of the COMPTEL instrument on the Compton Gamma Ray Observatory. This mission must achieve sensitivity significantly greater than that of COMPTEL in order to advance the science of relativistic particle accelerators, nuclear astrophysics, and diffuse backgrounds, and bridge the gap between current and future hard X-ray missions and the high-energy Fermi mission. Such an increase in sensitivity can only come about via a dramatic decrease in the instrumental background. We are currently developing a concept for a low-background Compton telescope that employs modern scintillator technology to achieve this increase in sensitivity. Specifically, by employing LaBr3 scintillators for the calorimeter, one can take advantage of the unique speed and resolving power of this material to improve the instrument sensitivity while simultaneously enhancing its spectroscopic and imaging performance. Also, using deuterated organic scintillator in the scattering detector will reduce internal background from neutron capture. We present calibration results from a laboratory prototype of such an instrument, including time-of-flight, energy, and angular resolution, and compare them to simulation results using a detailed Monte Carlo model. We also describe the balloon payload we have built for a test flight of the instrument in the fall of 2010

A new low-background Compton telescope using LaBr3 scintillator

Gamma-ray astronomy in the MeV range suffers from weak fluxes from sources and high background in the nuclear energy range. The background comes primarily from neutron-induced gamma rays, with the neutrons being produced by cosmic-ray interactions in the Earth\u27s atmosphere, the spacecraft, and the instrument. Compton telescope designs often suppress this background by requiring coincidences in multiple detectors and a narrow time-of-flight (ToF) acceptance window. The COMPTEL experience on the Compton Gamma Ray Observatory shows that a 1.9-ns ToF resolution is insufficiently narrow to achieve the required low background count rate. Furthermore, neutron interactions in the detectors themselves generate an irreducible background. By employing LaBr3 scintillators for the calorimeter, one can take advantage of the unique speed and resolving power of the material to improve the instrument sensitivity and simultaneously enhance its spectroscopic performance and thus its imaging performance. We present a concept for a balloon- or space-borne Compton telescope that employs deuterated liquid in the scattering detector and LaBr3 as a calorimeter and estimate the improvement in sensitivity over past realizations of Compton telescopes. We show initial laboratory test results from a small prototype, including energy and timing resolution. Finally, we describe our plan to fly this prototype on a test balloon flight to directly validate our background predictions and guide the development of a full-scale instrument

Development of CZT strip detector modules for 0.05- to 1-MeV gamma-ray imaging and spectroscopy

We report progress in our study of cadmium zinc telluride (CZT) strip detectors featuring orthogonal coplanar anode contacts. We specifically report on the performance, characterization and stability of 5 and 10 mm thick prototype CZT detectors fabricated using material from several manufacturers. Our ongoing work includes laboratory and simulation studies aimed at optimizing and developing compact, efficient, high performance detector modules for 0.05 to 1 MeV gamma radiation measurements with space-based instrumentation. The coplanar anode strip configuration retains many of the performance advantages of pixel detectors yet requires far fewer electronic channels to perform both 3-d imaging and spectroscopy. Minimizing the channel count is important for large balloon or space instruments including coded aperture telescopes (such as MARGIE or EXIST) and Compton imaging telescopes (such as TIGRE or ACT). We also present plans for developing compact, space qualified imaging modules designed for integration into closely packed large area detector arrays. We discuss issues associated with detector module and array electronics design and development

Single-sided CZT strip detectors

We report progress in the study of thick CZT strip detectors for 3-d imaging and spectroscopy and discuss two approaches to device design. We present the spectroscopic, imaging, detection efficiency and response uniformity performance of prototype devices. Unlike double-sided strip detectors, these devices feature both row and column contacts implemented on the anode surface. This electron-only approach circumvents problems associated with poor hole transport in CZT that normally limit the thickness and energy range of double-sided strip detectors. These devices can achieve similar performance to pixel detectors. The work includes laboratory and simulation studies aimed at developing compact, efficient, detector modules for 0.05 to 1 MeV gamma radiation measurements. The low channel count strip detector approach can significantly reduce the complexity and power requirements of the readout electronics. This is particularly important in space-based coded aperture or Compton telescope instruments requiring large area, large volume detector arrays. Such arrays will be required for NASA\u27s Black Hole Finder Probe (BHFP) and Advanced Compton Telescope (ACT)

Single-sided CZT strip detectors

We report progress in the study of thick CZT strip detectors for 3-D imaging and spectroscopy and discuss two approaches to device design. Unlike double-sided strip detectors, these devices feature both row and column contacts implemented on the anode surface. This electron-only approach circumvents problems associated with poor hole transport in CZT that normally limit the thickness and energy range of double-sided strip detectors. The work includes laboratory and simulation studies aimed at developing compact, efficient, detector modules for 0.05 to 1 MeV gamma radiation measurements while minimizing the number and complexity of the electronic readout channels. These devices can achieve similar performance to pixel detectors for both 3-D imaging and spectroscopy. The low channel count approach can significantly reduce the complexity and power requirements of the readout electronics. This is particularly important in applications requiring large area detector arrays. We show two single-sided strip detector concepts. One, previously reported, features rows established with collecting contacts and columns with noncollecting contacts. Another, introduced here, operates on a charge sharing principle and establishes both rows and columns with collecting contacts on the anode surface. In previous work using the earlier strip detector concept we reported simulations and measurements of energy and spatial resolution for prototype 5- and 10-mm-thick CZT detectors. We now present the results of detection efficiency and uniformity measurements conducted on 5-mm-thick detectors using a specific configuration of the front-end electronics and event trigger. We discuss the importance of the detector fabrication processes when implementing this approach

Path-integral molecular dynamics simulation of 3C-SiC

Molecular dynamics simulations of 3C-SiC have been performed as a function of pressure and temperature. These simulations treat both electrons and atomic nuclei by quantum mechanical methods. While the electronic structure of the solid is described by an efficient tight-binding Hamiltonian, the nuclei dynamics is treated by the path integral formulation of statistical mechanics. To assess the relevance of nuclear quantum effects, the results of quantum simulations are compared to others where either the Si nuclei, the C nuclei or both atomic nuclei are treated as classical particles. We find that the experimental thermal expansion of 3C-SiC is realistically reproduced by our simulations. The calculated bulk modulus of 3C-SiC and its pressure derivative at room temperature show also good agreement with the available experimental data. The effect of the electron-phonon interaction on the direct electronic gap of 3C-SiC has been calculated as a function of temperature and related to results obtained for bulk diamond and Si. Comparison to available experimental data shows satisfactory agreement, although we observe that the employed tight-binding model tends to overestimate the magnitude of the electron-phonon interaction. The effect of treating the atomic nuclei as classical particles on the direct gap of 3C-SiC has been assessed. We find that non-linear quantum effects related to the atomic masses are particularly relevant at temperatures below 250 K.Comment: 14 pages, 15 figure

Resonant electron transmission through a finite quantum spin chain

Electron transport in a finite one dimensional quantum spin chain (with ferromagnetic exchange) is studied within an $s-d$ exchange Hamiltonian. Spin transfer coefficients strongly depend on the sign of the $s-d$ exchange constant. For a ferromagnetic coupling, they exhibit a novel resonant pattern, reflecting the salient features of the combined electron-spin system. Spin-flip processes are inelastic and feasible at finite voltage or at finite temperature.Comment: 4 pages including 4 .eps figure

Bulk viscosity in kaon-condensed color-flavor locked quark matter

Color-flavor locked (CFL) quark matter at high densities is a color superconductor, which spontaneously breaks baryon number and chiral symmetry. Its low-energy thermodynamic and transport properties are therefore dominated by the H (superfluid) boson, and the octet of pseudoscalar pseudo-Goldstone bosons of which the neutral kaon is the lightest. We study the CFL-K^0 phase, in which the stress induced by the strange quark mass causes the kaons to condense, and there is an additional ultra-light "K^0" Goldstone boson arising from the spontaneous breaking of isospin. We compute the bulk viscosity of matter in the CFL-K^0 phase, which arises from the beta-equilibration processes K^0H+H and K^0+HH. We find that the bulk viscosity varies as T^7, unlike the CFL phase where it is exponentially Boltzmann-suppressed by the kaon's energy gap. However, in the temperature range of relevance for r-mode damping in compact stars, the bulk viscosity in the CFL-K^0 phase turns out to be even smaller than in the uncondensed CFL phase, which already has a bulk viscosity much smaller than all other known color-superconducting quark phases.Comment: 23 pages, 8 figures, v2: references added; minor rephrasings in the conclusions; version to appear in J. Phys.

Molecular clutch drives cell response to surface viscosity

Cell response to matrix rigidity has been explained by the mechanical properties of the actin-talin-integrin-fibronectin clutch. Here the molecular clutch model is extended to account for cell interactions with purely viscous surfaces (i.e., without an elastic component). Supported lipid bilayers present an idealized and controllable system through which to study this concept. Using lipids of different diffusion coefficients, the mobility (i.e., surface viscosity) of the presented ligands (in this case RGD) was altered by an order of magnitude. Cell size and cytoskeletal organization were proportional to viscosity. Furthermore, there was a higher number of focal adhesions and a higher phosphorylation of FAK on less-mobile (more-viscous) surfaces. Actin retrograde flow, an indicator of the force exerted on surfaces, was also seen to be faster on more mobile surfaces. This has consequential effects on downstream molecules; the mechanosensitive YAP protein localized to the nucleus more on less-mobile (more-viscous) surfaces and differentiation of myoblast cells was enhanced on higher viscosity. This behavior was explained within the framework of the molecular clutch model, with lower viscosity leading to a low force loading rate, preventing the exposure of mechanosensitive proteins, and with a higher viscosity causing a higher force loading rate exposing these sites, activating downstream pathways. Consequently, the understanding of how viscosity (regardless of matrix stiffness) influences cell response adds a further tool to engineer materials that control cell behavior