2,209 research outputs found

    Household's vulnerability to shocks in Zambia

    Get PDF
    Zambia is a county characterized by a high incidence of poverty and exposure to several types of shocks like HIV/AIDS, macroeconomic instability and periodic droughts. In this paper the authors conduct an in depth analysis of the incidence and impact of those shocks on poverty. The analysis of the HIV/AIDS epidemic, carried out using the data on the occurrence of the death of an adult in the previous 12 months and the existence of foster children, shows the existence of a generaldecrease in consumption with the exception of non poor rural families. The deterioration of the economic situation and the related high level of unemployment resulted in a lower level of economic wellbeing. Finally, the analysis of the impact of the drought shows that while a significant percentage (17 percent) of the poorest households in rural areas would experience significant losses in maize production (covering 8 percent of all the households), they are concentrated in a few communities in Southern, Central and Western provinces. In order to identify those households that might suffer more from the negative impact of the shocks and/or have a low level of human capital the authors defined"vulnerable households", those that are likely to be poor and exposed to shocks, and"chronically poor households", those that are likely to be poor and have low levels of human capital outcomes. According to this definition, about 20 percent of the households are vulnerable whilst almost 40 percent are chronically poor and 10 percent are at the same time both vulnerable and chronically poor and therefore at most risk. Private coping mechanisms and private transfers are very common, but they do not seem to be effective in helping households to deal with the adverse impact of shocks. On the other hand, household participation in food for work programs increase after the death of a household member. Therefore there is a need for long term household human capital investments, programs to alleviate the burden of HIV/AIDS, and targeted programs for the alleviating weather related shocks like the drought.Rural Poverty Reduction,Services&Transfers to Poor,Poverty Assessment,Small Area Estimation Poverty Mapping,Housing&Human Habitats

    Polariton excitation in epsilon-near-zero slabs: transient trapping of slow light

    Get PDF
    We numerically investigate the propagation of a spatially localized and quasi-monochromatic electromagnetic pulse through a slab with Lorentz dielectric response in the epsilon-near-zero regime, where the real part of the permittivity vanishes at the pulse carrier frequency. We show that the pulse is able to excite a set of virtual polariton modes supported by the slab, the excitation undergoing a generally slow damping due to absorption and radiation leakage. Our numerical and analytical approaches indicate that in its transient dynamics the electromagnetic field displays the very same enhancement of the field component perpendicular to the slab, as in the monochromatic regime. The transient trapping is inherently accompanied by a significantly reduced group velocity ensuing from the small dielectric permittivity, thus providing a novel platform for achieving control and manipulation of slow light

    An exact Coulomb cutoff technique for supercell calculations

    Get PDF
    We present a new reciprocal space analytical method to cutoff the long range interactions in supercell calculations for systems that are infinite and periodic in 1 or 2 dimensions, extending previous works for finite systems. The proposed cutoffs are functions in Fourier space, that are used as a multiplicative factor to screen the bare Coulomb interaction. The functions are analytic everywhere but in a sub-domain of the Fourier space that depends on the periodic dimensionality. We show that the divergences that lead to the non-analytical behaviour can be exactly cancelled when both the ionic and the Hartree potential are properly screened. This technique is exact, fast, and very easy to implement in already existing supercell codes. To illustrate the performance of the new scheme, we apply it to the case of the Coulomb interaction in systems with reduced periodicity (as one-dimensional chains and layers). For those test cases we address the impact of the cutoff in different relevant quantities for ground and excited state properties, namely: the convergence of the ground state properties, the static polarisability of the system, the quasiparticle corrections in the GW scheme and in the binding energy of the excitonic states in the Bethe-Salpeter equation. The results are very promising.Comment: Submitted to Physical Review B on Dec 23rd 200

    effects of upgraded cooling system and new blade materials on a real gas turbine performance

    Get PDF
    Abstract The aim of this paper is to study the effects on the performance of a real heavy-duty gas turbine of two different solutions for enhancing turbine blades thermal resistance. An upgrade of the first stator cooling system and the adoption of improved blade materials are simulated exploiting an in-house simulation tool (ESMS). The changes are studied separately in order to point out the positive effects as well as the related risks, such as the side effect of temperature increase on downstream blade rows, to be considered in service operations

    Anisotropic compression in the high pressure regime of pure and Cr-doped vanadium dioxide

    Full text link
    We present structural studies of V1−x_{1-x}Crx_xO2_2 (pure, 0.7% and 2.5% Cr doped) compounds at room temperature in a diamond anvil cell for pressures up to 20 GPa using synchrotron x-ray powder diffraction. All the samples studied show a persistence of the monoclinic M1M_1 symmetry between 4 and 12 GPa. Above 12 GPa, the monoclinic M1M_1 symmetry changes to isostructural MxM_x phase (space group P21/cP2_1/c) with a significant anisotropy in lattice compression of the bb-cc plane of the M1M_{1} phase. This behavior can be reconciled invoking the pressure induced charge-delocalization

    The Building Information Model and the IFC standard: analysis of the characteristics necessary for the acoustic and energy simulation of buildings

    Get PDF
    The new European Directive 2014/24 / EU requires for all member States the use of BIM procedures in the construction of public buildings. The countries belonging to the European Union shall be obliged to transpose the Directive and adapt their procedures to that effect. The paper analyzes the IFC format, the only recognized by the European Directive Standards for BIM procedures, in order to assess its use for simulations of buildings. IFC, described by the ISO 16739 (2013), is today a standard that describes the topology of the constructive elements of the building and what belongs to it overall. The format includes geometrical information on the room and on all building components, including details of the type for performance (transmittance, fire resistance, sound insulation), in other words it is an independent object file for the software producers to which, according to the European Directive, it will be compulsory to refer in the near future, during the different stages of the life of a building from the design phase, to management and possible demolition at the end of life. The IFC initiative began in 1994, when an industry consortium invested in the development of a set of C ++ classes that can support the development of integrated applications. Twelve US companies joined the consortium: these companies that were included initially are called the consortium "Industry Alliance for Interoperability". In September 1995 the Alliance opened up membership to all interested parties, and in 1997 changed its name to "International Alliance for Interoperability". The new alliance was reconstituted as a non-profit organization, with the aim of developing and promoting the '' Industry Foundation Class "(IFC) as a neutral data model for the building product that were useful to gather information throughout the life cycle of a building facility. Since 2005 the Alliance has been carrying out its activities through its national chapters called SMART building. The present study aims at evaluating the IFC, comparing the information and data contained in it, with other formats already used for energy simulations of buildings such as the gbXML (Green Building XML), highlighting the missing required information and proposing the inclusion of new ones to issue the energy and acoustic simulation. More generally the attention is focused to building physics simulation software devoted to exploit the BIM model potential enabling interoperability

    Factors Determining the Agreement between Aerobic Threshold and Point of Maximal Fat Oxidation: Follow-Up on a Systematic Review and Meta-Analysis on Association

    Get PDF
    Regular exercise at the intensity matching maximal fat oxidation (FATmax) has been proposed as a key element in both athletes and clinical populations when aiming to enhance the body’s ability to oxidize fat. In order to allow a more standardized and tailored training approach, the connection between FATmax and the individual aerobic thresholds (AerT) has been examined. Although recent findings strongly suggest that a relationship exists between these two intensities, correlation alone is not sufficient to confirm that the intensities necessarily coincide and that the error between the two measures is small. Thus, this systematic review and meta-analysis aim to examine the agreement levels between the exercise intensities matching FATmax and AerT by pooling limits of agreement in a function of three parameters: (i) the average difference, (ii) the average within-study variation, and (iii) the variation in bias across studies, and to examine the influence of clinical and methodological inter- and intra-study differences on agreement levels. This study was registered with PROSPERO (CRD42021239351) and ClinicalTrials (NCT03789045). PubMed and Google Scholar were searched for studies examining FATmax and AerT connection. Overall, 12 studies with forty-five effect sizes and a total of 774 subjects fulfilled the inclusion criteria. The ROBIS tool for risk of bias assessment was used to determine the quality of included studies. In conclusion, the overall 95% limits of agreement of the differences between FATmax and AerT exercise intensities were larger than the a priori determined acceptable agreement due to the large variance caused by clinical and methodological differences among the studies. Therefore, we recommend that future studies follow a strict standardization of data collection and analysis of FATmax- and AerT-related outcomes
    • …
    corecore