64 research outputs found

    A sustainable and simple energy dispersive X-ray fluorescence method for sulfur determination at trace levels in biodiesel samples via formation of biodiesel spots on a suitable solid support

    Get PDF
    The aim of the present work is the development of a simple, sensitive and sustainable EDXRF method for the determination of trace amounts of sulfur in biodiesel samples. In this method, the deposition of several microliters of sample onto an organic thin layer and the analysis of the resulting adsorbed biodiesel spot by benchtop EDXRF is proposed. A careful study was performed to select the volume and the best solid support to deposit biodiesel samples, including filters made of different materials (glass fiber, Nylon, cellulose, paper) and a commercial disposable absorbent pad (UltraCarry, Rigaku). A critical issue that limits the use of most of these solid supports was the relative high blank signals that hamper the determination of sulfur at trace levels. Finally, it was found that best strategy was the deposition of 50 ”L of biodiesel on the UltraCarry sample retainer. Operating conditions for EDXRF measurements were also evaluated to obtain the best instrumental sensitivity for sulfur determination (Excitation: 20 kV, no primary filter, measurement time: 300 s). Using the best analytical conditions the quantification limit of the method was 7 mg kg -1 of sulfur. This value is even better than the one reported in the ASTM D4294 method (LOQ: 16.0 mg kg -1 ) but using a sample amount 100 times smaller. The linearity was confirmed in the range of 10–100 mg kg -1 by analyzing a set of commercial biodiesel standards. Accuracy and precision of the results, evaluated by the analysis of samples prepared with the same matrix as the standards, with levels of 20, 40 and 75 mg kg -1 of sulfur, and processed as unknowns, proved acceptable (Recoveries: 94.3–110.6%, RSD: 10.8–13.6%, n = 3) for the intended purpose. Overall, the performance of the method developed is promising and it could be used to determine trace amounts of sulfur in biodiesel samples in a simple, sustainable and cost-effective way. Furthermore, since the original sample is adsorbed onto a solid support, repeat confirmatory analyses on the same specimen, if needed, can be carried out

    Application of benchtop total-reflection X-ray fluorescence spectrometry and chemometrics in classification of origin and type of Croatian wines

    Get PDF
    The contents of selected metals (K, Ca, Fe, Cu, Zn, Mn, Sr, Rb, Ba, Pb, Ni, Cr and V) in 70 wine samples from Continental and Adriatic part of Croatia and different types of wine (red and white) were determined by TXRF. The aim of this study was to compare the elemental composition of wines from two different regions and to determine the discriminant ability of each variable and to indicate which variables discriminate between the four categories considered. Principal component analysis and cluster analysis showed that K, Mn, Ba and Ni can be considered as the most important characteristics to distinguish between Continental red and white wines, Rb, Ni and Ba for Continental red and Adriatic red wines while Sr is the only metal that completely distinguishes the samples of each category. Finally, linear discriminant analysis showed good recognition (100%) and prediction abilities (96.43%) using these selected elements

    Ceria nanoparticles deposited on graphene nanosheets for adsorption of copper(II) and lead(II) ions and of anionic species of arsenic and selenium

    Get PDF
    A nanocomposite prepared from graphene nanosheets and cerium nanoparticles (G/CeO) was applied to the extraction of Se(IV), As(V), As(III), Cu(II) and Pb(II). The structure of G/CeO was investigated by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The optimal pH values for extraction are 4.0 for As(V), 3.0 for Se(IV), and 6.0 for both Cu(II) and Pb(II). The maximum adsorption capacity of G/CeO (expressed as mg·g) were calculated by the Langmuir model and are found to be 8.4 for As(V), 14.1 for Se(IV), 50.0 for Cu(II) and 75.6 for Pb(II). The sorbent was applied to dispersive solid phase microextraction prior to direct quantitation by energy-dispersive X-ray fluorescence spectrometry without the need for prior elution. The limits of detection (in ng·mL units) are 0.10 for As(V), 0.11 for Se(IV), 0.19 for Cu(II) and 0.21 for Pb(II). The precisions (RSDs) are <4.5%. The accuracy of the method (1 - 4%) was verified by analysis of the certified reference material (CRM 1640a - natural water). The method was successfully applied in ultratrace element determination and to the speciation of selenium in environmental waters
    • 

    corecore