The True-Twin microcalorimeter: a proof-of-concept experiment

We present a proof-of-concept experiment to realize microwave primary power standard with a true-twin microcalorimeter. Double feeding line microcalorimeters are widely used by National Metrology Institutes. A drawback concerns the system calibration: traditional processes changes measurement conditions between system characterization and the measurement stage. Nevertheless, if the feeding lines are made twin, a measurement scheme that avoids separate characterization can be applied, equations simplify and time consumption is halved. Here we demonstrates the feasibility of the idea. The result of an effective efficiency spectroscopy of a thermoelectric power sensor is compared with figures obtained with well established methods.Comment: 11 pages, 2 figures, 1 tabl

Recognition of landslides in lunar impact craters

Landslides have been observed on several planets and minor bodies of the solar System, including the Moon. Notwithstanding different types of slope failures have been studied on the Moon, a detailed lunar landslide inventory is still pending. Undoubtedly, such will be in a benefit for future geological and morphological studies, as well in hazard, risk and suscept- ibility assessments. A preliminary survey of lunar landslides in impact craters has been done using visual inspection on images and digital elevation model (DEM) (Brunetti et al. 2015) but this method suffers from subjective interpretation. A new methodology based on polynomial interpolation of crater cross-sections extracted from global lunar DEMs is presented in this paper. Because of their properties, Chebyshev polynomials were already exploited for para- metric classification of different crater morphologies (Mahanti et al., 2014). Here, their use has been extended to the discrimination of slumps in simple impact craters. Two criteria for recognition have provided the best results: one based on fixing an empirical absolute thresholding and a second based on statistical adaptive thresholding. The application of both criteria to a data set made up of 204 lunar craters’ cross-sections has demonstrated that the former criterion provides the best recognition

Two different ways in evaluating the uncertainty of S-parameter measurements

The expression of uncertainty of scattering parameter measurements in vector network analysis is an active research subject, since no full consensus about proper algorithms for such expression has been reached so far. Recently, two software packages have been acquired at INRIM, which allow to perform this task in a metrological framework. In this paper we compare the result of analysis performed by two packages, VNA Tools II and Multiport Measurement Software version 4 (MMS4). Both packages claim to perform uncertainty analyses fully compliant to the Guide of expression of uncertainty in measurement, but following completely different approaches. We organized a comparison by performing, with both packages, analyses of the very same datasets. These have been generated by real measurements on passive standards with a commercial vector network analyzer. Results of the comparison give consistency of the uncertainty analyses performed by the software packages, which can be therefore considered equivalent and mutually validated

A digital twin for 64Cu production with cyclotron and solid target system

One method for finding reliable and cost-effective solutions for designing radioisotope production systems is represented by the "digital twin" philosophy of design. Looking at cyclotron solid targets, uncertainties of the particle beam, material composition and geometry play a crucial role in determining the results. The difference between what has been designed and what can be effectively manufactured, where processes such as electroplating are poorly controllable and generate large non-uniformities in deposition, must also be considered. A digital twin, where the target geometry is 3D scanned from real models, can represent a good compromise for connecting "ideal" and "real" worlds. Looking at the 64Ni(p,n)64Cu reaction, different Unstructured-Mesh MCNP6 models have been built starting from the 3D solid target system designed and put into operation by COMECER. A characterization has been performed considering the designed ideal target and a 3D scan of a real manufactured target measured with a ZEISS contact probe. Libraries and physics models have been also tested due to limited cross-section data. Proton spectra in the target volume, 3D proton-neutron-photon flux maps, average energies, power to be dissipated, shut-down dose-rate, 64Cu yield compared with various sources of experimental data and beam axial shifting impact, have been estimated. A digital twin of the 64Ni(p,n)64Cu production device has been characterized, considering the real measured target geometry, paving the way for a fully integrated model suitable also for thermal, structural or fluid-dynamic analyses

High Energy Neutrinos from Cosmic Ray Interactions in Clusters of Galaxies

The spatial clustering of galaxies in galaxy clusters implies that the background of infrared (IR) light in the intracluster medium (ICM) may exceed the universal background. Cosmic rays injected within the ICM propagate diffusively and at low enough energies are trapped there for cosmological times. The photopion production interactions of cosmic rays with the IR photons are responsible for the generation of neutrinos whose detection may shed some light on the origin and propagation of high energy cosmic rays in the universe. Here we discuss our calculations of the flux of neutrinos from single clusters as well as the contribution of photopion production in clusters of galaxies to the diffuse neutrino background.Comment: 10 pages, 10 figures, submitted to PR

Xylella fastidiosa subsp. pauca, Neofusicoccum spp. and the decline of olive trees in salento (Apulia, Italy). Comparison of symptoms, possible interactions, certainties and doubts

Xylella fastidiosa subsp. pauca (XFP), Neofusicoccum mediterraneum, N. stellenboschiana and other fungi have been found in olive groves of Salento (Apulia, Italy) that show symptoms of severe decline. XFP is well known to be the cause of olive quick decline syndrome (OQDS). It has also been assessed that Neofusicoccum spp. causes a distinct disease syndrome, namely, branch and twig dieback (BTD). All these phytopathogens incite severe symptoms that can compromise the viability of large canopy sectors or the whole tree. However, their specific symptoms are not easily distinguished, especially during the final stages of the disease when branches are definitively desiccated. By contrast, they can be differentiated during the initial phases of the infection when some facets of the diseases are typical, especially wood discoloration, incited solely by fungi. Here, we describe the typical symptomatological features of OQDS and BTD that can be observed in the field and that have been confirmed by Koch postulate experiments. Similar symptoms, caused by some abiotic adverse conditions and even by additional biotic factors, are also described. Thus, this review aims at: (i) raising the awareness that declining olive trees in Salento do not have to be linked a priori to XFP; (ii) defining the guidelines for a correct symptomatic diagnosis to orient proper laboratory analyses, which is crucial for the application of effective control measures. The possibility that bacterium and fungi could act as a polyspecies and in conjunction with predisposing abiotic stresses is also widely discussed

Groundwater flow and geochemical modeling of the Acque Albule thermal basin (Central Italy): a conceptual model for evaluating influences of human exploitation on flowpath and thermal resource availability

Although the Acque Albule Basin has been studied since the middle of the 19th century, a comprehensive geologic conceptual model of the area has not yet been developed. The natural setting has been heavily modified by anthropic activities. Rapid evolution during the last 25 years has caused many interferences, which have led to a drastic increase of the hazards and linked risks, mainly related to water resource overexploitation and subsidence. The implementation of an exhaustive framework has become mandatory for environmental and management purposes. Starting from a critical review of previous studies, hydrogeologic and hydrogeochemical surveys and related numerical modeling have been carried out in order to achieve a quantitative understanding of the active phenomena and processes. Several hydrogeologic issues have been addressed concerning aquifer recharge areas and the different flowpaths of groundwater in respect to their division into a shallow and a deep circuit. Account has been taken of the groundwater chemistry as a function of water—rock interactions and mixing processes with uprising fluids. Different scenarios of groundwater flow in the Acque Albule aquifer have been built, using previously available piezometric measurements and the hydrodynamic parameters determined by in situ tests. These results led to the formulation of an updated hydrogeologic conceptual model to be further implemented, in which past, present and future anthropic instances and the potential of natural resources of the area have been included and taken into account. A sound conceptual model must rely on the design and development of a logical geo-database in which information is stored, updated and processed. This operational framework can result in a useful tool for land management, surveys planning and design, hazard and risk evaluation, identification of best practices and economic development of the area