The Distribution of Kemp's Ridley Sea Turtles (Lepidochelys kempi) Along the Texas Coast: An Atlas

Eight hundred sixty-five records of Kemp's ridley sea turtles (Lepidochelys kempi) reported from Texas between the late 1940's to April 1990 were compiled from six data bases and the literature, then plotted on a series of Texas maps. Four categories of Kemp's ridleys are identified throughout the atlas: head-started (turtles that are raised in captivity their first year of life), wild, historical (pre-1980), and nesters. Geographic, seasonal, and size distributions of the turtle categories are plotted by regions. Most Kemp's ridleys were reported from the northeast and central Texas coast. They were reported from both inshore (landward of barrier islands) and offshore (seaward of barrier islands). Scattered nestings occurred in the central to southern regions. Kemp's ridleys were found more often during the spring and summer. A total of 546 turtle records contained measurements; most were 20-59.9 cm curved carapace length and considered sub-adults. Comparison of distributions of head-started and wild Kemp's ridleys suggests head-started Kemp's ridleys inhabit the same areas as wild Kemp's ridleys. (PDF file contains 56 pages.

Three-Dimensional Magnetotelluric Characterization of the Travale Geothermal Field (Italy)

The geoelectrical features of the Travale geothermal field (Italy), one of the most productive geothermal fields in the world, have been investigated by means of three-dimensional (3D) magnetotelluric (MT) data inversion. This study presents the first resistivity model of the Travale geothermal field derived from derivative-based 3D MT inversion. We analyzed MT data that have been acquired in Travale over the past decades in order to determine its geoelectrical dimensionality, directionality, and phase tensor properties. We selected data from 51 MT sites for 3D inversion. We carried out a number of 3D MT inversion tests by changing the type of data to be inverted, the inclusion of static-shift correction at some sites where new time-domain electromagnetic soundings (TDEM) were acquired, the grid rotation, as well as the starting model in order to assess the connection between the inversion model and the geology. The final 3D model herein presents deep elongated resistive bodies between the depths of 1.5 and 8 km. They are transverse to the Apennine structures and suggest a correlation with the strike-slip tectonics. Comparison with a seismic velocity model and well log data suggests a highly-fractured volume of rocks with vapor-dominated circulation. The outcome of this study provides new insights into the complex geothermal system of Travale

Concept designs for NASA's Solar Electric Propulsion Technology Demonstration Mission

Multiple Solar Electric Propulsion Technology Demonstration Mission were developed to assess vehicle performance and estimated mission cost. Concepts ranged from a 10,000 kilogram spacecraft capable of delivering 4000 kilogram of payload to one of the Earth Moon Lagrange points in support of future human-crewed outposts to a 180 kilogram spacecraft capable of performing an asteroid rendezvous mission after launched to a geostationary transfer orbit as a secondary payload. Low-cost and maximum Delta-V capability variants of a spacecraft concept based on utilizing a secondary payload adapter as the primary bus structure were developed as were concepts designed to be co-manifested with another spacecraft on a single launch vehicle. Each of the Solar Electric Propulsion Technology Demonstration Mission concepts developed included an estimated spacecraft cost. These data suggest estimated spacecraft costs of $200 million -$300 million if 30 kilowatt-class solar arrays and the corresponding electric propulsion system currently under development are used as the basis for sizing the mission concept regardless of launch vehicle costs. The most affordable mission concept developed based on subscale variants of the advanced solar arrays and electric propulsion technology currently under development by the NASA Space Technology Mission Directorate has an estimated cost of $50M and could provide a Delta-V capability comparable to much larger spacecraft concepts

Early Growth in Weight of Kemp\u27s Ridley Sea Turtles (Lepidochelys kempii) in Captivity

Growth in individual weight (w, kg) of Kemp’s ridley sea turtles (Lepidochelys kempii) in captivity was described for 15 year-classes (1978-1992) of turtles between ages (t) 0.17 to 1.22 yr, using In linear regression: Inw = lnc + dt1/2, where Inc is the intercept and d is the slope (growth rate index). There was significant (P \u3c 0.001) heterogeneity in d among year-classes, with slowest growth (d = 3.798) exhibited by the 1983 year-class and fastest growth (d = 6.929) by the 1985 year-class, but there was no significant trend in d (P = 0.307) over year-classes. The variance of residuals from regression, s2reg, ranged from 0.2032 for the 1978 year-class to 0.0075 for the 1992 year-class, and showed a significant (P = 0.0001) logarithmic decrease over the year-classes. This decline in variation among individuals was probably due to a a shift toward sex ratios dominated by one sex (females), improvements in rearing facilities, year-around control of seawater temperature which reduced disease incidence, improved diet, and reduced feeding levels. The relationship between w and scl (straight carapace length) was also described

CDI/THREDDS interoperability in the SeaDataNet framework

Abstract. SeaDataNet is an EU funded project aiming to create and operate a pan-European, marine data infrastructure for managing the large and diverse datasets (i.e. temperature, salinity current, sea level, chemical, physical and biological properties) collected by the oceanographic fleets and the new automatic observation systems. In order to make the SeaDataNet system compliant with the INSPIRE Implementing Rules for discovery service, an ISO 19139 encoding of the SeaDataNet Common Data Index (CDI) metadata model was defined. Moreover, the problem of heterogeneous data sources has been addressed. In fact, a widely used system of SeaDataNet partners and oceanographic-marine community is THREDDS/OPeNDAP; this raises up the problem of federating into SeaDataNet framework THREDDS/OPeNDAP systems as well. In this paper we describe an interoperability framework to access resources (i.e. data and services) that are available through CDI and THREDDS/OPeNDAP services. The proposed solution implements a common catalog interface to discover and access the two heterogeneous resources in a common way. This catalog service is fully distributed and implements international standards as far as geospatial information discovery and query are concerned. The developed solution is called GI-cat and was experimented in the framework of the SeaDataNet European project

In vitro simulation of dental implant bridges removal: Influence of luting agent and abutments geometry on retrievability

Implant fixed dental prostheses are widely used for the treatment of edentulism, often preferred over the screw-retained ones. However, one of the main features of an implant-supported prosthesis is retrievability, which could be necessary in the case of implant complications. In this study, the retrievability of implant-fixed dental prostheses was investigated considering two of the main factors dental practitioners have to deal with: the abutments geometry and the luting agent. Impulsive forces were applied to dental bridge models to simulate crowns’ retrievability in clinical conditions. The number of impulses and the impulsive force delivered during each test were recorded and used as retrievability indexes. One-hundred-and-five tests were conducted on 21 combinations of bridges and luting agents, and a Kruskal-Wallis test was performed on the results. The abutment geometry significantly influenced the number of impulses needed for retrieval (p < 0.05), and a cement-dependent trend was observed as well. On the other hand, the forces measured during tests showed no clear correlation with bridge retrievability. The best retrievability was obtained with long, slightly tapered abutments and a temporary luting agent

Forward and Inverse Modelling Approaches for Prediction of Light Stimulus from Electrophysiological Response in Plants

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this record.In this paper, system identification approach has been adopted to develop a novel dynamical model for describing the relationship between light as an environmental stimulus and the electrical response as the measured output for a bay leaf (Laurus nobilis) plant. More specifically, the target is to predict the characteristics of the input light stimulus (in terms of on-off timing, duration and intensity) from the measured electrical response - leading to an inverse problem. We explored two major classes of system estimators to develop dynamical models - linear and nonlinear - and their several variants for establishing a forward and also an inverse relationship between the light stimulus and plant electrical response. The best class of models are given by the Nonlinear Hammerstein-Wiener (NLHW) estimator showing good data fitting results over other linear and nonlinear estimators in a statistical sense. Consequently, a few set of models using different functional variants of NLHW has been developed and their accuracy in detecting the on-off timing and intensity of the input light stimulus are compared for 19 independent plant datasets (including 2 additional species viz. Zamioculcas zamiifolia and Cucumis sativus) under similar experimental scenario.The work reported in this paper was supported by project PLants Employed As SEnsor Devices (PLEASED), EC grant agreement number 296582

Clinical implications of discordant early molecular responses in CML patients treated with imatinib

A reduction in BCR-ABL1/ABL1IS transcript levels to &lt;10% after 3 months or &lt;1% after 6 months of tyrosine kinase inhibitor therapy are associated with superior clinical outcomes in chronic myeloid leukemia (CML) patients. In this study, we investigated the reliability of multiple BCR-ABL1 thresholds in predicting treatment outcomes for 184 subjects diagnosed with CML and treated with standard-dose imatinib mesylate (IM). With a median follow-up of 61 months, patients with concordant BCR-ABL1/ABL1IS transcripts below the defined thresholds (10% at 3 months and 1% at 6 months) displayed significantly superior rates of event-free survival (86.1% vs. 26.6%) and deep molecular response (≥ MR4; 71.5% vs. 16.1%) compared to individuals with BCR-ABL1/ABL1IS levels above these defined thresholds. We then analyzed the outcomes of subjects displaying discordant molecular transcripts at 3-and 6-month time points. Among these patients, those with BCR-ABL1/ABL1IS values &gt;10% at 3 months but &lt;1% at 6 months fared significantly better than individuals with BCR-ABL1/ABL1IS &lt;10% at 3 months but &gt;1% at 6 months (event-free survival 68.2% vs. 32.7%; p &lt; 0.001). Likewise, subjects with BCR-ABL1/ABL1IS at 3 months &gt;10% but &lt;1% at 6 months showed a higher cumulative incidence of MR4 compared to patients with BCR-ABL1/ABL1IS &lt;10% at 3 months but &gt;1% at 6 months (75% vs. 18.2%; p &lt; 0.001). Finally, lower BCR-ABL1/GUSIS transcripts at diagnosis were associated with BCR-ABL1/ABL1IS values &lt;1% at 6 months (p &lt; 0.001). Our data suggest that when assessing early molecular responses to therapy, the 6-month BCR-ABL1/ABL1IS level displays a superior prognostic value compared to the 3-month measurement in patients with discordant oncogenic transcripts at these two pivotal time points

BCR-ABL1 doubling-times and halving-times may predict CML response to tyrosine kinase inhibitors

In Chronic Myeloid Leukemia (CML), successful treatment requires accurate molecular monitoring to evaluate disease response and provide timely interventions for patients failing to achieve the desired outcomes. We wanted to determine whether measuring BCR-ABL1 mRNA doubling-times (DTs) could distinguish inconsequential rises in the oncogene’s expression from resistance to tyrosine kinase inhibitors (TKIs). Thus, we retrospectively examined BCR-ABL1 evolution in 305 chronic-phase CML patients receiving imatinib mesylate (IM) as a first line treatment. Patients were subdivided in two groups: those with a confirmed rise in BCR-ABL1 transcripts without MR3.0 loss and those failing IM. We found that the DTs of the former patients were significantly longer than those of patients developing IM resistance (57.80 vs. 41.45 days, p = 0.0114). Interestingly, the DT values of individuals failing second-generation (2G) TKIs after developing IM resistance were considerably shorter than those observed at the time of IM failure (27.20 vs. 41.45 days; p = 0.0035). We next wanted to establish if decreases in BCR-ABL1 transcripts would identify subjects likely to obtain deep molecular responses. We therefore analyzed the BCR-ABL1 halving-times (HTs) of a different cohort comprising 174 individuals receiving IM in first line and observed that, regardless of the time point selected for our analyses (6, 12, or 18 months), HTs were significantly shorter in subjects achieving superior molecular responses (p = 0.002 at 6 months; p &lt; 0.001 at 12 months; p = 0.0099 at 18 months). Moreover, 50 patients receiving 2G TKIs as first line therapy and obtaining an MR3.0 (after 6 months; p = 0.003) or an MR4.0 (after 12 months; p = 0.019) displayed significantly shorter HTs than individuals lacking these molecular responses. Our findings suggest that BCR-ABL1 DTs and HTs are reliable tools to, respectively, identify subjects in MR3.0 that are failing their assigned TKI or to recognize patients likely to achieve deep molecular responses that should be considered for treatment discontinuation