Analysis of double-parallel amplified recirculating optical-delay lines

A novel method of analysis of double-parallel amplified recirculating optical-delay lines (DPAROD) is presented. The location of the maxima and the minima of the transfer function for this configuration is calculated and experimentally demonstrated. The influence of different parameters, such as the coupling coefficients, gains, lengths of the fiber loops and fractional losses of the directional couplers, on the shape of the transfer function are analyzed. Different measurements have been taken to verify this model. The potential application of these interconnected delay loops as filters is a reason for developing this method.Publicad

Amplified Fiber-Optic Recirculating Delay Lines

Experimental and theoretical results on single- and double-amplified recirculating delay lines are presented. One of our aims is to emphasize their application as filters, showing a wide flexibility of design. Analysis of their performance in the spectral and time domains have been carried out. A novel method of understanding the behavior of double structures has been developed and successfully tested with experimental results employing Er-doped fiber amplifiers as delay lines.Publicad

Effect of preparation conditions on the polymorphism and transport properties of lanthanum molybdates

In this work, La6MoO12-based compounds were investigated as part of a new family of materials very competitive as hydrogen separation membranes [1,2]. La5.4MoO11.1 was synthesized by the freeze-drying precursor method and the calcination conditions were optimized in order to obtain single phases. Several cooling rates were applied and different polymorphs were obtained: a simple cubic fluorite symmetry (Fm-3m) for the sample cooled by quenching, and two different rhombohedral (R-3) space groups for the samples cooled at 50 ºC•min-1 and 0.5 ºC•min-1 (see Figure below). For the quenched sample, the Rietveld refinement was satisfactory in a Fm-3m space group. For the other two compositions no structural model was available and were indexed in a R-3 space group, however some small reflections were not given any intensity by the model used. Transmission electron microscopy confirmed the presence of superstructures for those samples. All ceramic materials were obtained with relative densities close to 100% after sintering at 1500 ºC. Stability studies demonstrated that all three polymorphs were stable in oxidizing and reducing conditions at 800 ºC for 48 hours. The three samples present a significant proton contribution to the conductivity at temperatures lower than 800 ºC. These results were confirmed by thermogravimetric analysis. The highest conductivity values were observed for the samples prepared by quenching. The three polymorphs display a small p-type electronic contribution to the overall conductivity in oxidizing conditions and n-type electronic one in very reducing conditions, much more significant for the samples cooled by quenching and at 50 ºC•min-1.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Analysis of the power balance In the cells of a multilevel cascaded H-Bridge converter

Multilevel cascaded H-Bridge converters (CHB) have been presented as a good solution for high power applications. In this way, several control and modulation techniques have been proposed for this power converter topology. In this paper the steady state power balance in the cells of the single phase two cell CHB is studied. The capability to be supplied with active power from the grid or to deliver active power to the grid in each cell is analyzed according to the dc-link voltages and the desired ac output voltage value. Limits of the maximum and minimum input active power for stable operation of the CHB are addressed. Simulation results are shown to validate the presented analysis

Fabrication and magnetic properties of hard/soft magnetostatically coupled FePt/FeNi multilayer microwires

3 pages, 5 figures.-- PACS: 75.70.Cn; 75.60.Ej; 75.50.Ww; 81.15.Pq; 68.65.Ac; 81.40.EfA family of multilayer microwires with hard/soft biphase magnetic behavior is here introduced. The microwires consist of a Fe63Pt27Si10 hard magnetic nucleus and a Fe20Ni80 soft outer shell separated by an intermediate insulating Pyrex glass microtube. The precursor FePtSi glass-coated microwire is fabricated by quenching and drawing technique, and its L10 hard magnetic phase is grown by postannealing treatment technique. The polycrystalline FeNi soft magnetic outer shell has been deposited by electroplating. The analysis of the low-field hysteresis loops of the FeNi soft phase after premagnetizing until near magnetic saturation provides information about the magnetostatic coupling between phases. The FeNi magnetization curve is shifted toward positive field when the FePt remanent magnetization is positive and vice versa. A systematic analysis of the magnetostatic coupling and the corresponding bias field arising from uncompensated poles of the premagnetized FePt hard phase has been performed. The strength of the bias field is shown to increase with the reduction of thickness of the FeNi layer. These magnetostatically coupled biphase systems are thought to be of large potential interest as sensing elements in sensor devices.The work has been developed under the Project No. MAT2004-00150 supported by the Spanish Ministry of Education and Science, MEC. J. T. acknowledges a FPU program fellowship from MEC.Peer reviewe

Production of Transglutaminase by Streptoverticillium ladakanum NRRL-3191 Using Glycerol as Carbon Source

The enzyme transglutaminase (TG) catalyses the formation of covalent bonds between adjacent proteins, thereby improving the gel structure of proteins and has important applications for the food industry. The aims of this work were: (i) to elucidate the effect of agitation speed during the biotechnological production of TG by Streptoverticillium ladakanum NRRL-3191 using glycerol as carbon source; and (ii) to improve TG production by optimising the composition of media based on glycerol, xylose and casein. An agitation speed of 250 rpm and a fermentation time of 72 h resulted in the optimal enzymatic activity (0.628 U/mL) with a productivity of 0.087 U/(mL·h). The composition of media with glycerol, xylose and casein were optimised using an experimental design to improve TG production. The model predicts that the maximum TG activity (0.725 U/mL) can be obtained using glycerol 50.5 g/L and casein 20 g/L without the addition of xylose

Feed-forward Space Vector Modulation for Single-Phase Multilevel Cascade Converters with any DC voltage ratio

Modulation techniques for multilevel converters can create distorted output voltages and currents if the DC link voltages are unbalanced. This situation can be avoided if the instantaneous DC voltage error is not taken into account in the modulation process. This paper proposes a feed-forward space vector modulation method for a single-phase multilevel cascade converter. Using this modulation technique, the modulated output voltage of the power converter always generates the reference determined by the controller even in worst case voltage unbalance conditions. In addition the possibility of optimizing the DC voltage ratio between the H-bridges of the power converter is introduced. Experimental results from a 5kVA prototype are presented in order to validate the proposed modulation technique

High pressure effects on the activities of cathepsins B and D of mackerel and horse mackerel muscle

We determined high pressure processing (HPP) effects on the activities of cathepsins B and D in the muscles of mackerel (Scomber scombrus) and horse mackerel (Trachurus trachurus). In mackerel, the cathepsin B activity decrease reached 40% at 450 MPa while in horse mackerel, low and intermediate pressures (150 and 300 MPa) caused an activity increase (30%) but at 450 MPa a decrease of up to 60%. In both species, cathepsin D activity increased after a 300 MPa treatment (up to 2-fold for mackerel and 60% for horse mackerel) and decreased on a 450 MPa treatment. The activity increase is probably due to HPP damage of lysosome releasing enzymes into the fish muscle. Based on the HPP effects on the activities of cathepsins B and D, 450 MPa may be used to reduce the proteolytic activity of cathepsin B prior to chilled or frozen storage of these fish speciesSupported by the Xunta de Galicia, Spain Project 10TAL402001PR, 2010-2012, and FCT (Portugal), European Union, QREN, FEDER and COMPETE thorough QOPNA research unit, Project PEst-C/QUI/UI0062/2013; FCOMP-01-0124-FEDER-037296. Also supported by he USDA National Institute of Food and Agriculture, Grants No. 2011-31200-06041 and 2012-31200-06041S

Degradation of AlInGap red LEDs under drive current and temperature accelerated life tests

AlInGaP LEDs are widely used in illumination applications as automotive and signalization due their low consumption and high durability. In order to verify the high durability data it is necessary to consider not only catastrophic failures but also degradation. In this work LEDs degradation at different temperature and drive current accelerated tests have been analyzed. In all the tests we have carried out an exponential degradation trend have been observed. Temperature and drive current influence in degradation rate and reliability have been evaluated

A sandwich ELISA to detect VHSV and IPNV in turbot

Abstract: The recent demonstration that reared turbot (Scophthalmus maximus L) is a natural host for salmonid rhabdoviruses has made their rapid detection relevant to these fish species. A unique protocol to select and use non-competitive monoclonal antibodies (Mabs) for two high-sensitivity sandwich ELISAs has been developed to detect both infectious pancreatic necrosis virus (IPNV) and viral haemorrhagic septicaemia virus (VHSV) in turbot kidney extracts to assess the possibility of using them in field diagnosis. For maximum sensitivity, turbot kidney extracts can be two-fold diluted with high-ionic strength buffers and assayed for the presence of the major viral proteins (VMS rhabdovirus nucleoprotein N/Nx and/or IPN birnavirus protein VP3). The use of control plates coated with irrelevant mouse antibodies (IgG1 and IgG2a) in parallel ELISAs allows for a precise estimation of possible false positives. Turbot kidney extracts with low levels of virus might now be assayed directly without using cell culture, with high precision and in a short time during the acute phase of these viral diseases in reared turbot.Acuidoro, SL; INI