An approach to high speed ship ride quality simulation

The high speeds attained by certain advanced surface ships result in a spectrum of motion which is higher in frequency than that of conventional ships. This fact along with the inclusion of advanced ride control features in the design of these ships resulted in an increased awareness of the need for ride criteria. Such criteria can be developed using data from actual ship operations in varied sea states or from clinical laboratory experiments. A third approach is to simulate ship conditions using measured or calculated ship motion data. Recent simulations have used data derived from a math model of Surface Effect Ship (SES) motion. The model in turn is based on equations of motion which have been refined with data from scale models and SES of up to 101 600-kg (100-ton) displacement. Employment of broad band motion emphasizes the use of the simulators as a design tool to evaluate a given ship configuration in several operational situations and also serves to provide data as to the overall effect of a given motion on crew performance and physiological status

Life cycle and host specificity of Vairimorpha plodiae (Microspora)

Imperial Users onl

Direct Freeform Fabrication of Spatially Heterogeneous Living Cell-Impregnated Implants

The objectives of this work are the development of the processes, materials, and tooling to directly “3-D print” living, pre-seeded, patient-specific implants of spatially heterogeneous compositions. The research presented herein attempts to overcome some of the challenges to scaffolding, such as the difficulty of producing spatially heterogeneous implants that require varied seeding densities and/or cell-type distributions. In the proposed approach, living implants are fabricated by the layer-wise deposition of pre-cell-seeded alginate hydrogel. Although alginate hydrogels have been previously used to mold living implants, the properties of the alginate formulations used for molding were not suitable for 3-D printing. In addition to changing the formulation to make the alginate hydrogels “printable,” we developed a robotic hydrogel deposition system and supporting CAD software to deposit the gel in arbitrary geometries. We demonstrated this technology’s capabilities by printing alginate gel implants of multiple materials with various spatial heterogeneities, including, implants with completely embedded material clusters. The process was determined to be both viable (94±5% n=15) and sterile (less than one bacterium per 0.9 µL after 8 days of incubation). Additionally, we demonstrated the printing of a meniscus cartilage-shaped gel generated directly from a CT Scan. The proposed approach may hold advantages over other tissue printing efforts [5,9]. This technology has the potential to overcome challenges to scaffolding and could enable the efficient fabrication of spatially heterogeneous, patient-specific, living implants.Mechanical Engineerin

Western aeronautical test range real-time graphics software package MAGIC

The master graphics interactive console (MAGIC) software package used on the Western Aeronautical Test Range (WATR) of the NASA Ames Research Center is described. MAGIC is a resident real-time research tool available to flight researchers-scientists in the NASA mission control centers of the WATR at the Dryden Flight Research Facility at Edwards, California. The hardware configuration and capabilities of the real-time software package are also discussed

Nondestructive tests of regenerative chambers

The capabilities and limitations of nondestructive evaluation methods were studied to detect and locate bond deficiencies in regeneratively cooled thrust chambers for rocket engines. Flat test panels and a cylinder were produced to simulate regeneratively cooled thrust chamber walls. Planned defects with various bond integrities were produced in the panels to evaluate the sensitivity, accuracy, and limitations of nondestructive methods to define and locate bond anomalies. Holography, acoustic emission, and ultrasonic scan were found to yield sufficient data to discern bond quality when used in combination and in selected sequences. Bonding techniques included electroforming and brazing. Materials of construction included electroformed nickel bonded to Nickel 200 and OFHC copper, electroformed copper bonded to OFHC copper, and 300 series stainless steel brazed to OFHC copper. Variations in outer wall strength, wall thickness, and defect size were evaluated for nondestructive test response

Nondestructive tests of regenerative chambers, appendix

For abstract, see N75-12058

Head-up displays - A study of their applicability in civil aviation

Benefits and problems of using head-up displays in commercial and general aviation aircraf

Trophic classification of Tennessee Valley area reservoirs derived from LANDSAT multispectral scanner data

LANDSAT MSS data from four different dates were extracted from computer tapes using a semiautomated digital data handling and analysis system. Reservoirs were extracted from the surrounding land matrix by using a Band 7 density level slice of 3; and descriptive statistics to include mean, variance, and ratio between bands for each of the four bands were calculated. Significant correlations ( 0.80) were identified between the MSS statistics and many trophic indicators from ground truth water quality data collected at 35 reservoirs in the greater Tennessee Valley region. Regression models were developed which gave significant estimates of each reservoir's trophic state as defined by its trophic state index and explained in all four LANDSAT frames at least 85 percent of the variability in the data. To illustrate the spatial variations within reservoirs as well as the relative variations between reservoirs, a table look up elliptical classification was used in conjunction with each reservoir's trophic state index to classify each reservoir on a pixel by pixel basis and produce color coded thematic representations

Manipulator system man-machine interface evaluation program

Application and requirements for remote manipulator systems for future space missions were investigated. A manipulator evaluation program was established to study the effects of various systems parameters on operator performance of tasks necessary for remotely manned missions. The program and laboratory facilities are described. Evaluation criteria and philosophy are discussed