In vitro models of biological barriers for nanomedical research

Nanoconstructs developed for biomedical purposes must overcome diverse biological barriers before reaching the target where playing their therapeutic or diagnostic function. In vivo models are very complex and unsuitable to distinguish the roles plaid by the multiple biological barriers on nanoparticle biodistribution and effect; in addition, they are costly, time-consuming and subject to strict ethical regulation. For these reasons, simplified in vitro models are preferred, at least for the earlier phases of the nanoconstruct development. Many in vitro models have therefore been set up. Each model has its own pros and cons: conventional 2D cell cultures are simple and cost-effective, but the information remains limited to single cells; cell monolayers allow the formation of cell-cell junctions and the assessment of nanoparticle translocation across structured barriers but they lack three-dimensionality; 3D cell culture systems are more appropriate to test in vitro nanoparticle biodistribution but they are static; finally, bioreactors and microfluidic devices can mimicking the physiological flow occurring in vivo thus providing in vitro biological barrier models suitable to reliably assess nanoparticles relocation. In this evolving context, the present review provides an overview of the most representative and performing in vitro models of biological barriers set up for nanomedical research

Novel applications of long-established histochemical techniques to study nanoparticle-cell interactions at transmission electron microscopy

Alcian blue staining has been used to visualise nanoparticles at transmission electron microscop

Hyaluronic acid-based nanocomplexes as novel drug-nanocarriers to treat myotonic dystrophy

Hyaluronic acid-based nanocomplexes have been developpend as novel drug-nanocarriers to treat myotonic dystroph

Spin and Charge Luttinger-Liquid Parameters of the One-Dimensional Electron Gas

Low-energy properties of the homogeneous electron gas in one dimension are completely described by the group velocities of its charge (plasmon) and spin collective excitations. Because of the long range of the electron-electron interaction, the plasmon velocity is dominated by an electrostatic contribution and can be estimated accurately. In this Letter we report on Quantum Monte Carlo simulations which demonstrate that the spin velocity is substantially decreased by interactions in semiconductor quantum wire realizations of the one-dimensional electron liquid.Comment: 13 pages, figures include

Critical speed estimated by statistically appropriate fitting procedures.

Intensity domains are recommended when prescribing exercise. The distinction between heavy and severe domains is made by the critical speed (CS), therefore requiring a mathematically accurate estimation of CS. The different model variants (distance versus time, running speed versus time, time versus running speed, and distance versus running speed) are mathematically equivalent. Nevertheless, error minimization along the correct axis is important to estimate CS and the distance that can be run above CS (d'). We hypothesized that comparing statistically appropriate fitting procedures, which minimize the error along the axis corresponding to the properly identified dependent variable, should provide similar estimations of CS and d' but that different estimations should be obtained when comparing statistically appropriate and inappropriate fitting procedure. Sixteen male runners performed a maximal incremental aerobic test and four exhaustive runs at 90, 100, 110, and 120% of their peak speed on a treadmill. Several fitting procedures (a combination of a two-parameter model variant and regression analysis: weighted least square) were used to estimate CS and d'. Systematic biases (P < 0.001) were observed between each pair of fitting procedures for CS and d', even when comparing two statistically appropriate fitting procedures, though negligible, thus corroborating the hypothesis. The differences suggest that a statistically appropriate fitting procedure should be chosen beforehand by the researcher. This is also important for coaches that need to prescribe training sessions to their athletes based on exercise intensity, and their choice should be maintained over the running seasons

Therapeutic Use of Exercising in Hypoxia: Promises and Limitations.

International audienc

A variational method from the variance of energy

A variational method is studied based on the minimum of energy variance. The method is tested on exactly soluble problems in quantum mechanics, and is shown to be a useful tool whenever the properties of states are more relevant than the eigenvalues. In quantum field theory the method provides a consistent second order extension of the gaussian effective potential.Comment: 5 ps figure

Heat Transfer Analysis in a Flow Over Concave Wall With Primary and Secondary Instabilities

AbstractThe centrifugal instability mechanism in boundary layers over concave surfaces is responsible for the development of counter- rotating vortices, aligned in the streamwise direction, known as Görtler vortices. These vortices create two regions in the spanwise direction, the upwash and downwash regions. The downwash region is responsible for compressing the boundary layer towards the wall, increasing the drag coefficient and the heat transfer rate. The upwash region does the opposite. The Görtler vortices distort the streamwise velocity profile in the spanwise and the wall-normal directions. These distortions generate inflections in the distribution of streamwise velocity that are unstable to unsteady disturbances giving rise to secondary instabilities. In these flows the secondary instabilities can be of varicose or sinuous mode. The present paper analyses the heat transfer in a flow over a concave wall subjected to primary and secondary instabilities. The research is carried out by a Spatial Direct Numerical Simulation. The adopted parameters mimic the experimental parameters of Winoto and collaborators 17,18 and the Prandtl number adopted was Pr = 0.72. The results show that the varicose mode is the dominant secondary instability for the adopted parameters and that the spanwise average heat transfer rates can reach higher values than the turbulent ones. The higher heat transfer is caused by the mean flow distortion induced by the vortices, and this is present before high–frequency secondary instability sets in. Hence there is no direct connection to secondary instability. Possibly low–frequency modes undergo instability earlier

The Winckelmann300 Project: Dissemination of Culture with Virtual Reality at the Capitoline Museum in Rome

The best way to disseminate culture is, nowadays, the creation of scenarios with virtual and augmented reality that supply the visitors of museums with a powerful, interactive tool that allows to learn sometimes difficult concepts in an easy, entertaining way. 3D models derived from reality-based techniques are nowadays used to preserve, document and restore historical artefacts. These digital contents are also powerful instrument to interactively communicate their significance to non-specialist, making easier to understand concepts sometimes complicated or not clear. Virtual and Augmented Reality are surely a valid tool to interact with 3D models and a fundamental help in making culture more accessible to the wide public. These technologies can help the museum curators to adapt the cultural proposal and the information about the artefacts based on the different type of visitor’s categories. These technologies allow visitors to travel through space and time and have a great educative function permitting to explain in an easy and attractive way information and concepts that could prove to be complicated. The aim of this paper is to create a virtual scenario and an augmented reality app to recreate specific spaces in the Capitoline Museum in Rome as they were during Winckelmann’s time, placing specific statues in their original position in the 18th century

Fat oxidation, hormonal and plasma metabolite kinetics during a submaximal incremental test in lean and obese adults

This study aimed to compare fat oxidation, hormonal and plasma metabolite kinetics during exercise in lean (L) and obese (O) men. Sixteen L and 16 O men [Body Mass Index (BMI): 22.9 ± 0.3 and 39.0 ± 1.4 kg · m(-2)] performed a submaximal incremental test (Incr) on a cycle-ergometer. Fat oxidation rates (FORs) were determined using indirect calorimetry. A sinusoidal model, including 3 independent variables (dilatation, symmetry, translation), was used to describe fat oxidation kinetics and determine the intensity (Fat(max)) eliciting maximal fat oxidation. Blood samples were drawn for the hormonal and plasma metabolite determination at each step of Incr. FORs (mg · FFM(-1) · min(-1)) were significantly higher from 20 to 30% of peak oxygen uptake (VO2peak) in O than in L and from 65 to 85% VO2peak in L than in O (p ≤ 0.05). FORs were similar in O and in L from 35 to 60% VO2peak. Fat max was 17% significantly lower in O than in L (p<0.01). Fat oxidation kinetics were characterized by similar translation, significantly lower dilatation and left-shift symmetry in O compared with L (p<0.05). During whole exercise, a blunted lipolysis was found in O [lower glycerol/fat mass (FM) in O than in L (p ≤ 0.001)], likely associated with higher insulin concentrations in O than in L (p<0.01). Non-esterified fatty acids (NEFA) were significantly higher in O compared with L (p<0.05). Despite the blunted lipolysis, O presented higher NEFA availability, likely due to larger amounts of FM. Therefore, a lower Fat(max), a left-shifted and less dilated curve and a lower reliance on fat oxidation at high exercise intensities suggest that the difference in the fat oxidation kinetics is likely linked to impaired muscular capacity to oxidize NEFA in O. These results may have important implications for the appropriate exercise intensity prescription in training programs designed to optimize fat oxidation in O