209 research outputs found
FPGA-based true random number generation using circuit metastability with adaptive feedback control
13th International Workshop, Nara, Japan, September 28 â October 1, 2011. ProceedingsThe paper presents a novel and efficient method to generate true random numbers on FPGAs by inducing metastability in bi-stable circuit elements, e.g. flip-flops. Metastability is achieved by using precise programmable delay lines (PDL) that accurately equalize the signal arrival times to flip-flops. The PDLs are capable of adjusting signal propagation delays with resolutions higher than fractions of a pico second. In addition, a real time monitoring system is utilized to assure a high degree of randomness in the generated output bits, resilience against fluctuations in environmental conditions, as well as robustness against active adversarial attacks. The monitoring system employs a feedback loop that actively monitors the probability of output bits; as soon as any bias is observed in probabilities, it adjusts the delay through PDLs to return to the metastable operation region. Implementation on Xilinx Virtex 5 FPGAs and results of NIST randomness tests show the effectiveness of our approach
A1 Printed in the Islamic Republic of Iran
Abstract -Showing the occurrence of glass/rubber transition in bovine serum albumin (a globular protein) at low moisture levels and the occurrence of Maillard crosslinking in gelatin in previous works, the importance of the state of glass or rubber of BSA on the rate and extent of polymerisation, protein solubility, colour and SDS PAGE patterns in the presence and absence of ascorbic acid, diketogulonic acid and dehydroascorbic acid was investigated. BSA on storage with Ascorbic acid and its degradation products at low moisture contents (8.3% and 19.1%) at a relatively low temperature (40ÂșC) can undergo chemical changes resulting in marked increase in molecular weight, solubility decrease and formation of browning colour. The glassy state data established the occurrence of chemical changes (Maillard crosslinking and disulfide crosslinking) in the BSA system on storage below its glass transition temperature
A Very High Speed True Random Number Generator with Entropy Assessment
International audienceThe proposed true random number generator (TRNG) exploits the jitter of events propagating in a self-timed ring (STR) to generate random bit sequences at a very high bit rate. It takes advantage of a special feature of STRs that allows the time elapsed between successive events to be set as short as needed, even in the order of picoseconds. If the time interval between the events is set in concordance with the clock jitter magnitude, a simple entropy extraction scheme can be applied to generate random numbers. The proposed STR-based TRNG (STRNG) follows AIS31 recommendations: by using the proposed stochastic model, designers can compute a lower entropy bound as a function of the STR characteristics (number of stages, oscillation period and jitter magnitude). Using the resulting entropy assessment, they can then set the compression rate in the arithmetic post-processing block to reach the required security level determined by the entropy per output bit. Implementation of the generator in two FPGA families confirmed its feasibility in digital technologies and also confirmed it can provide high quality random bit sequences that pass the statistical tests required by AIS31 at rates as high as 200 Mbit/s
Accelerated Ripening of Kabkab Dates Using Sodium Chloride and Acetic Acid Solutions
ABSTRACT-In this research, the accelerated ripening of the Kabkab dates from Khalal to Tamr using NaCl and acetic acid solutions was studied. Fruits at Khalal stage were harvested and washed with distilled water before being treated with ripening inducers: 1. NaCl solutions, 2. acetic acid solutions and 3. Aqueous solution of NaCl (1%) and acetic acid. moisture, pH, colour, brix and textural firmness of the samples were monitored. Results indicated that during ripening the moisture content and colour changed significantly. The major change was observed for firmness where a maximum force for puncture test varied from about 1000 to 50 g force for all samples after 72 hours of incubation at 40 °C. Harvesting at Khalal stage followed by treating the fruits with NaCl and/or acetic acid solutions and an incubation stage at 40 °C showed to be a promising method for accelerated ripening
Fructan Contents in Australian Wheat Varieties Released Over the Last 150 Years
Grain fructans play an important role in the physiology of wheat plants and also impact on the health of consumers of wheat-based products. Given the potential economic importance of fructan levels, if genetic variability could be identified for this trait, it may be a potentially useful breeding target for developing climate-resilient and nutritionally enhanced wheat varieties. The aim of the current study was to screen 78 genetically diverse Australian wheat varieties released between 1860 and 2015 to determine if historic breeding targets have resulted in changes in fructan levels and to identify potential breeding parents for the development of varieties with specific fructan levels. The impact of seasonal conditions on grain fructan levels were also investigated. Analysis of the varieties in this study indicated that historic breeding targets have not impacted on grain fructan levels. Fructan content in flours varied between 1.01 to 2.27%, showing some variation among the varieties. However, a significant variation in fructan levels was observed between different harvest years (mean values for 2015 and 2016 samples were 1.38 and 1.74%, respectively). While large variations in fructan contents of different varieties were not found, there were some varieties with consistently higher or lower fructan contents which could be used to breed varieties with specific fructan levels
FPGA Time-Bounded Unclonable Authentication
Abstract. This paper introduces a novel technique for extracting the unique tim-ing signatures of the FPGA configurable logic blocks in a digital form over the space of possible challenges. A new class of physical unclonable functions that enables inputs challenges such as timing, digital, and placement challenges can be built upon the delay signatures. We introduce a suite of new authentication protocols that take into account non-triviality of bitstream reverse-engineering in addition to the FPGAâs unprecedented speed in responding to challenges. Our technique is secure against various attacks and robust to fluctuations in opera-tional conditions. Proof of concept implementation of the signature extraction and evaluations of the proposed methods are demonstrated on Xilinx Virtex 5 FPGAs. Experimental results demonstrate practicality of the proposed techniques.
Robust, low-cost, auditable random number generation for embedded system security
This paper presents an architecture for a discrete, high-entropy hardware random number generator. Because it is constructed out of simple hardware components, its operation is transparent and auditable. Using avalanche noise, a nondeterministic physical phenomenon, the circuit is inherently probabilistic and resists adversarial control. Furthermore, because it compares the outputs from two matched noise sources, it rejects environmental disturbances like power supply ripple. The resulting hardware produces more than 0.98 bits of entropy per sample, is inexpensive, has a small footprint, and can be disabled to conserve power when not in use
Utilization of Renewable Biomass and Waste Materials for Production of Environmentally-Friendly, Bio-based Composites
The introduction of renewable biomass into a polymer matrix is an option competing with other
possibilities, such as energy recovery and/or re-use in the carbonized state, or production of
chemicals, such as, in the case of ligno-cellulosic waste, concentrates on the production of simple
sugars, then possibly leading to the development of biopolymers. These competitive applications
have also some interest and market, however with a considerable energy, water and materials
consumption, due also to the not always high yielding. Other possibilities for renewable biomass are
therefore being used as fillers to increase mechanical performance of polymers or to allow e.g., the
absorption of toxic chemicals. This review concentrates on the use of biomass as close as possible
to the âas receivedâ state, therefore avoiding whenever suitable any thermal treatment. More
specifically, it focuses on its introduction into the three categories of oil-based (or bio-based
replacement) of engineered polymers, into industrial biopolymers, such as poly(lactic acid) (PLA)
and self-developed biopolymers, such as thermoplastic starch (TPS)
Behaviour of Dietary Fibre Supplements During Bread Dough Development Evaluated Using Novel Farinograph Curve Analysis
Effect of size reduction on colour, hydration and rheological properties of wheat bran
- âŠ