Fabrication and characterization of magnetic FePt nanoparticles prepared by extraction–pyrolysis method

We are grateful to Prof. E. Kotomin for useful discussions. The research leading to these results has received funding from the ERAF (2017) Project, while A. I. Popov thanks IMIS-2 for the funding support.In the present work, possibilities of the extraction–pyrolysis method (EPM) to produce FePt nanoparticles with the face-centered tetragonal (fct) phase were studied. A mixture of fine-disperse powder of carbonyl iron and n-trioctylam-monium hexachloroplatinate [(С8Н17)3NH]2PtCl6 solution in toluene, preliminary produced by the solvent extraction method, is used as a precursor. Precursors with a different molar ratio of metals were used. The performed investigations show that as a result of pyrolysis in the air (Tpyr = 600°C, tanneal = 30 min), a FePt alloy with the fct phase is produced. Moreover, such phases as FePt3 and/or Fe3Pt with the cubic structure may be also present in the final products. The phase composition of the produced samples depends on the Fe:Pt molar ratio in the precursor. An increase of the fct phase part with the growth of the iron content from 40 to 60 mol% is observed. Also, with the Fe80%Pt20% molar ratio of the metals in the precursor, only the ordered fct phase along with a small amount of hematite and iron chloride exists in the produced sample. Magnetic measurements confirm the fct-FePt phase formation in all produced samples and evidence that the coercivity exceeds the value (3 kOe) at the 50 mol% Fe concentration in the precursor and significantly decreases with increasing the Fe concentration to 80 mol%.ERAF; IMIS-2; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART

Fabrication and characterization of magnetic FePt nanoparticles prepared by extraction–pyrolysis method

We are grateful to Prof. E. Kotomin for useful discussions. The research leading to these results has received funding from the ERAF (2017) Project, while A. I. Popov thanks IMIS-2 for the funding support.In the present work, possibilities of the extraction–pyrolysis method (EPM) to produce FePt nanoparticles with the face-centered tetragonal (fct) phase were studied. A mixture of fine-disperse powder of carbonyl iron and n-trioctylam-monium hexachloroplatinate [(С8Н17)3NH]2PtCl6 solution in toluene, preliminary produced by the solvent extraction method, is used as a precursor. Precursors with a different molar ratio of metals were used. The performed investigations show that as a result of pyrolysis in the air (Tpyr = 600°C, tanneal = 30 min), a FePt alloy with the fct phase is produced. Moreover, such phases as FePt3 and/or Fe3Pt with the cubic structure may be also present in the final products. The phase composition of the produced samples depends on the Fe:Pt molar ratio in the precursor. An increase of the fct phase part with the growth of the iron content from 40 to 60 mol% is observed. Also, with the Fe80%Pt20% molar ratio of the metals in the precursor, only the ordered fct phase along with a small amount of hematite and iron chloride exists in the produced sample. Magnetic measurements confirm the fct-FePt phase formation in all produced samples and evidence that the coercivity exceeds the value (3 kOe) at the 50 mol% Fe concentration in the precursor and significantly decreases with increasing the Fe concentration to 80 mol%.ERAF; IMIS-2; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART

Synthesis and vibration spectroscopy of nano-sized manganese oxides

The present study has been supported by the Latvian National Research Program IMIS2. One of us, IS, was supported by MES RF RFMEFI61615X0064.X-ray diffraction, micro-Raman and the Fourier transform infrared spectroscopies as well as magnetometry measurements were performed on nanosized manganese oxides to probe their phase composition and magnetic properties. It was shown that the XRD method is less sensitive to phase composition of manganese oxide samples than spectroscopic methods. While in some samples the XRD method recognised only the manganosite MnO phase, the Raman and FT-IR methods revealed additionally the presence of the hausmannite Mn3O4 phase.Ministry of Education and Science RF RFMEFI61615X0064; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART

Synthesis and vibration spectroscopy of nano-sized manganese oxides

The present study has been supported by the Latvian National Research Program IMIS2. One of us, IS, was supported by MES RF RFMEFI61615X0064.X-ray diffraction, micro-Raman and the Fourier transform infrared spectroscopies as well as magnetometry measurements were performed on nanosized manganese oxides to probe their phase composition and magnetic properties. It was shown that the XRD method is less sensitive to phase composition of manganese oxide samples than spectroscopic methods. While in some samples the XRD method recognised only the manganosite MnO phase, the Raman and FT-IR methods revealed additionally the presence of the hausmannite Mn3O4 phase.Ministry of Education and Science RF RFMEFI61615X0064; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART

Filling carbon nanotubes with magnetic particles

Magnetic carbon nanotube composites were obtained by filling carbon nanotubes with paramagnetic iron oxide particles. Measurements indicate that these functionalized nanotubes are superparamagnetic at room temperature. Details about the production and characterization of these materials are described along with the experimental procedures employed. These magnetic carbon nanotubes have the potential to be used in a wide range of applications, in particular, the production of nanofluids, which can be controlled by appropriate magnetic fields

‘Superior to Disney’: colour animation at Lenfilm, 1936-41

This article examines the phenomenon of colour-film animation at Lenfilm during the period 1936–1941. It discusses the development of colour technologies at the studio during the 1930s and the ways in which its artists responded to the aesthetic challenge of colour. Three of the seven short films produced during this period have been selected as case studies; they are examined here in the context of filmed animations in the Soviet Union during the 1930s, in particular the debates prompted by the screening of three Disney animations in Technicolor at the Moscow International Film Festival in 1935. The formal analysis of the case studies is based on the digital restorations in recent years at the Russian State Film Archive (Gosfilmfond), but also the inspection of one nitrate-positive of Mstislav Pashchenko’s Dzhiabzha (1939), which has survived intact at the archive. The technical difficulties posed by the hydrotype process developed at Lenfilm, as well as the challenge of producing sufficient prints for mass distribution, also form part of the discussion