211 research outputs found
Vegetation height products between 60° S and 60° N from ICESat GLAS data.
We present new coarse resolution (0.5� ×0.5�)vegetation height and vegetation-cover fraction data sets between
60� S and 60� N for use in climate models and ecological
models. The data sets are derived from 2003–2009 measurements collected by the Geoscience Laser Altimeter System (GLAS) on the Ice, Cloud and land Elevation Satellite (ICESat), the only LiDAR instrument that provides close to global coverage. Initial vegetation height is calculated from GLAS data using a development of the model of Rosette et al. (2008) with further calibration on desert sites. Filters are developed to identify and eliminate spurious observations in the GLAS data, e.g. data that are affected by clouds, atmosphere
and terrain and as such result in erroneous estimates
of vegetation height or vegetation cover. Filtered GLAS vegetation height estimates are aggregated in histograms from 0 to 70m in 0.5m intervals for each 0.5�×0.5�. The GLAS vegetation height product is evaluated in four ways. Firstly, the Vegetation height data and data filters are evaluated using aircraft LiDAR measurements of the same for ten sites in the Americas, Europe, and Australia. Application of filters to the GLAS vegetation height estimates increases the correlation with aircraft data from r =0.33 to r =0.78, decreases the root-mean-square error by a factor 3 to about 6m (RMSE) or 4.5m (68% error distribution) and decreases the bias from 5.7m to −1.3 m. Secondly, the global aggregated GLAS vegetation height product is tested for sensitivity towards the choice of data quality filters; areas with frequent cloud cover and areas with steep terrain are the most sensitive to the choice of thresholds for the filters. The changes in height estimates by applying different filters are, for the main part, smaller than the overall uncertainty of 4.5–6m established from the site measurements. Thirdly, the GLAS global vegetation height product is compared with a global vegetation height product typically used in a climate model, a recent global tree height product, and a vegetation greenness product and is shown to produce realistic estimates of vegetation height. Finally, the GLAS bare soil cover fraction is compared globally with the MODIS bare soil fraction (r = 0.65) and with bare soil cover fraction estimates derived from AVHRR NDVI data (r =0.67); the GLAS treecover fraction is compared with the MODIS tree-cover fraction (r =0.79). The evaluation indicates that filters applied to the GLAS data are conservative and eliminate a large proportion of spurious data, while only in a minority of cases at the cost of removing reliable data as well. The new GLAS vegetation height product appears more realistic than previous data sets used in climate models and ecological models and hence should significantly improve simulations that involve the land surface
A developmental analysis of communication between mothers and infants with Down's syndrome
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/68850/2/10.1177_027112148300300110.pd
Effectiveness evaluation of data mining based IDS
Proceeding of: 6th Industrial Conference on Data Mining, ICDM 2006, Leipzig, Germany, July 14-15, 2006.Data mining has been widely applied to the problem of Intrusion Detection in computer networks. However, the misconception of the underlying problem has led to out of context results. This paper shows that factors such as the probability of intrusion and the costs of responding to detected intrusions must be taken into account in order to compare the effectiveness of machine learning algorithms over the intrusion detection domain. Furthermore, we show the advantages of combining different detection techniques. Results regarding the well known 1999 KDD dataset are shown.Publicad
Composite grading algorithm for the National Cancer Institute’s Patient-Reported Outcomes version of the Common Terminology Criteria for Adverse Events (PRO-CTCAE)
Background: The Patient-Reported Outcomes version of the Common Terminology Criteria for Adverse Events is an item library designed for eliciting patient-reported adverse events in oncology. For each adverse event, up to three individual items are scored for frequency, severity, and interference with daily activities. To align the Patient-Reported Outcomes version of the Common Terminology Criteria for Adverse Events with other standardized tools for adverse event assessment including the Common Terminology Criteria for Adverse Events, an algorithm for mapping individual items for any given adverse event to a single composite numerical grade was developed and tested. Methods: A five-step process was used: (1) All 179 possible Patient-Reported Outcomes version of the Common Terminology Criteria for Adverse Events score combinations were presented to 20 clinical investigators to subjectively map combinations to single numerical grades ranging from 0 to 3. (2) Combinations with <75% agreement were presented to investigator committees at a National Clinical Trials Network cooperative group meeting to gain majority consensus via anonymous voting. (3) The resulting algorithm was refined via graphical and tabular approaches to assure directional consistency. (4) Validity, reliability, and sensitivity were assessed in a national study dataset. (5) Accuracy for delineating adverse events between study arms was measured in two Phase III clinical trials (NCT02066181 and NCT01522443). Results: In Step 1, 12/179 score combinations had <75% initial agreement. In Step 2, majority consensus was reached for all combinations. In Step 3, five grades were adjusted to assure directional consistency. In Steps 4 and 5, composite grades performed well and comparably to individual item scores on validity, reliability, sensitivity, and between-arm delineation. Conclusion: A composite grading algorithm has been developed and yields single numerical grades for adverse events assessed via the Patient-Reported Outcomes version of the Common Terminology Criteria for Adverse Events, and can be useful in analyses and reporting
Peripheral electrical stimulation in Alzheimer's Disease: A randomized controlled trial on cognition and behavior
In a number of studies, peripheral electrical nerve stimulation has been applied to Alzheimer's disease (AD) patients who lived in a nursing home. Improvements were observed in memory, verbal fluency, affective behavior, activities of daily living and on the rest-activity rhythm and pupillary light reflex. The aim of the present, randomized, placebo-controlled, parallel-group clinical trial was to examine the effects of electrical stimulation on cognition and behavior in AD patients who still live at home. Repeated measures analyses of variance revealed no effects of the intervention in the verum group (n = 32) compared with the placebo group (n = 30) on any of the cognitive and behavioral outcome measures. However, the majority of the patients and the caregivers evaluated the treatment procedure positively, and applying the daily treatment at home caused minimal burden. The lack of treatment effects calls for reconsideration of electrical stimulation as a symptomatic treatment in A
A multimodal iPSC platform for cystic fibrosis drug testing
Cystic fibrosis is a monogenic lung disease caused by dysfunction of the cystic fibrosis transmembrane conductance regulator anion channel, resulting in significant morbidity and mortality. The progress in elucidating the role of CFTR using established animal and cell-based models led to the recent discovery of effective modulators for most individuals with CF. However, a subset of individuals with CF do not respond to these modulators and there is an urgent need to develop novel therapeutic strategies. In this study, we generate a panel of airway epithelial cells using induced pluripotent stem cells from individuals with common or rare CFTR variants representative of three distinct classes of CFTR dysfunction. To measure CFTR function we adapt two established in vitro assays for use in induced pluripotent stem cell-derived airway cells. In both a 3-D spheroid assay using forskolin-induced swelling as well as planar cultures composed of polarized mucociliary airway epithelial cells, we detect genotype-specific differences in CFTR baseline function and response to CFTR modulators. These results demonstrate the potential of the human induced pluripotent stem cell platform as a research tool to study CF and in particular accelerate therapeutic development for CF caused by rare variants
Grain refinement of magnesium alloys: a review of recent research, theoretical developments and their application
This paper builds on the ‘‘Grain Refinement of Mg Alloys’’ published in 2005 and reviews the grain refinement research onMg alloys that has been undertaken since then with an emphasis on the theoretical and analytical methods that have been developed. Consideration of recent research results and current theoretical knowledge has highlighted two important factors that affect an alloy’s as-cast grain size. The first factor applies to commercial Mg-Al alloys where it is concluded that impurity and minor elements such as Fe and Mn have a substantially negative impact on grain size because, in combination with Al, intermetallic phases can be formed that tend to poison the more potent native or deliberately added nucleant particles present in the melt. This factor appears to explain the contradictory experimental outcomes reported in the literature and suggests that the search for a more potent and reliable grain refining technology may need to take a different approach. The second factor applies to all alloys and is related to the role of constitutional supercooling which, on the one hand, promotes grain nucleation and, on the other hand, forms a nucleation-free zone preventing further nucleation within this zone, consequently limiting the grain refinement achievable, particularly in low solute-containing alloys. Strategies to reduce the negative impact of these two factors are discussed. Further, the Interdependence model has been shown to apply to a broad range of casting methods from slow cooling gravity die casting to fast cooling high pressure die casting and dynamic methods such as ultrasonic treatment
Understanding morphological variation in the extant koala as a framework for identification of species boundaries in extinct koalas (Phascolarctidae; Marsupialia)
We document morphological variation (both geographical and sexual) in the dentition of the extant koala, Phascolarctos cinereus, in order to facilitate discrimination of species boundaries in extinct phascolarctids. Considerable variation is evident in dental structures previously used to diagnose several phascolarctid fossil species. Consistent patterns of morphological variation are not evident between sexes or geographic regions, with variation as great between samples as within them. Metric variation is evident between the sexes in upper molar dimensions with Victorian (southern) males significantly larger than Victorian females, although this is not reflected in lower molar dimensions or in the Queensland (northern) sample. Male koalas from southern populations generally display significantly larger molars than their northern counterparts; however this trend is not evident in female upper molar dimensions. In both males and females, some, but not all, lower molar dimensions are larger in southern populations than northern. In light of these results, a systematic revision of species of Litokoala suggests L. dicktedfordi' is a junior synonym of L. kutjamarpensis, and the poorly known L. thurmerae is regarded to be a nomen dubium. Further, we describe a partial cranium of a new species of koala from Early Miocene sediments in the Riversleigh World Heritage Area, northern Australia. Litokoala dicksmithi sp. nov. is the fifth koala species recorded from the diverse rainforest assemblages of Riversleigh and the third species referred to the Oligo-Miocene genus Litokoala. Aspects of cranial morphology, including a shortened robust rostrum and broad, irregular nasal aperture, confirm placement of Litokoala as sister taxon to the modern genus Phascolarctos. Relatively large orbits and small body size suggest the possibility that L. dicksmithi was nocturnal, had enhanced visual acuity, and was a more agile arboreal species than the relatively sedentary extant koala
- …