65 research outputs found
Noise measurement evaluations of various takeoff-climbout profiles of a four-engine turbojet transport airplane
Noise measurement evaluations of various takeoff-climbout profiles of four engine turbojet transport airplan
SCAMP: Rapid Focused Sonic Boom Waypoint Flight Planning Methods, Execution, and Results
Successful execution of the flight phase of the Superboom Caustic Analysis and Measurement Project (SCAMP) required accurate placement of focused sonic booms on an array of prepositioned ground sensors. While the array was spread over a 10,000-ft-long area, this is a relatively small region when considering the speed of a supersonic aircraft and sonic boom ray path variability due to shifting atmospheric conditions and aircraft trajectories. Another requirement of the project was to determine the proper position for a microphone-equipped motorized glider to intercept the sonic boom caustic, adding critical timing to the constraints. Variability in several inputs to these calculations caused some shifts of the focus away from the optimal location. Reports of the sonic booms heard by persons positioned amongst the array were used to shift the focus closer to the optimal location for subsequent passes. This paper describes the methods and computations used to place the focused sonic boom on the SCAMP array and gives recommendations for their accurate placement by future quiet supersonic aircraft. For the SCAMP flights, 67% of the foci were placed on the ground array with measured positions within a few thousand feet of computed positions. Among those foci with large caustic elevation angles, 96% of foci were placed on the array, and measured positions were within a few hundred feet of computed positions. The motorized glider captured sonic booms on 59% of the passes when the instrumentation was operating properly
Sonic boom and drag evaluation of supersonic jet concepts
This paper evaluates three different class supersonic airliners (Concorde, Cranfield E-5, and NASA QueSST X-plane) in a multidisciplinary design analysis optimization (MDAO) environment in terms of their sonic boom intensities and aerodynamic performance. The aerodynamic analysis and sonic boom prediction methods are key to this research. The panel method PANAIR is integrated to perform automated aerodynamic analysis. The drag coefficient is corrected by the Harris wave drag formula and form factor method. For sonic boom prediction, the near-field pressure is predicted through the Whitham F-function method. The F-function is decomposed to the F-function due to volume and the F-function due to lift to see their individual effect on sonic boom. The near-field signature propagates in a stratified windy atmosphere using the waveform parameter method. The aerodynamic results are compared with experimental data and the sonic boom prediction results are validated by the NASA PCBoom program. Through the evaluation, we find a direct link between the wave drag and the first derivative of the volume distribution. The sonic boom intensity is influenced by the lift distribution and the volume change rate. The study helps to study the feasibility of low-boom and low-drag supersonic airliners
A Flight Research Overview of WSPR, a Pilot Project for Sonic Boom Community Response
In support of NASAs ongoing effort to bring supersonic commercial travel to the public, NASA Dryden Flight Research Center and NASA Langley Research Center, in cooperation with other industry organizations, conducted a flight research experiment to identify the methods, tools, and best practices for a large-scale quiet (or low) sonic boom community human response test. The name of the effort was Waveforms and Sonic boom Perception and Response. Such tests will go towards building a dataset that governing agencies like the Federal Aviation Administration and International Civil Aviation Organization will use to establish regulations for acceptable sound levels of overland sonic booms. Until WSPR, there had never been an effort that studied the response of people in their own homes and performing daily activities to non-traditional, low sonic booms.WSPR was a NASA collaborative effort with several industry partners, in response to a NASA Aeronautics Research Mission Directorate Research Opportunities in Aeronautics. The primary contractor was Wyle. Other partners included Gulfstream Aerospace Corporation, Pennsylvania State University, Tetra Tech, and Fidell Associates, Inc.A major objective of the effort included exposing a community with the sonic boom magnitudes and occurrences expected in high-air traffic regions with a network of supersonic commercial aircraft in place. Low-level sonic booms designed to simulate those produced by the next generation of commercial supersonic aircraft were generated over a small residential community. The sonic boom footprint was recorded with an autonomous wireless microphone array that spanned the entire community. Human response data was collected using multiple survey methods. The research focused on essential elements of community response testing including subject recruitment, survey methods, instrumentation systems, flight planning and operations, and data analysis methods.This paper focuses on NASAs role in the efforts logistics and operations including human response subject recruitment, the operational processes involved in implementing the surveys throughout the community, instrumentation systems, logistics, flight planning, and flight operations. Findings discussed in this paper include critical lessons learned in all of those areas. The paper also discusses flight operations results. Analysis of the accuracy and repeatability of planning and executing the unique aircraft maneuver used to generate low sonic booms concluded that the sonic booms had overpressures within 0.15 pounds-per-square-feet of the planned values for 76 of t he attempts. Similarly, 90 of the attempts to generate low sonic booms within the community were successful
Evidence-based Kernels: Fundamental Units of Behavioral Influence
This paper describes evidence-based kernels, fundamental units of behavioral influence that appear to underlie effective prevention and treatment for children, adults, and families. A kernel is a behavior–influence procedure shown through experimental analysis to affect a specific behavior and that is indivisible in the sense that removing any of its components would render it inert. Existing evidence shows that a variety of kernels can influence behavior in context, and some evidence suggests that frequent use or sufficient use of some kernels may produce longer lasting behavioral shifts. The analysis of kernels could contribute to an empirically based theory of behavioral influence, augment existing prevention or treatment efforts, facilitate the dissemination of effective prevention and treatment practices, clarify the active ingredients in existing interventions, and contribute to efficiently developing interventions that are more effective. Kernels involve one or more of the following mechanisms of behavior influence: reinforcement, altering antecedents, changing verbal relational responding, or changing physiological states directly. The paper describes 52 of these kernels, and details practical, theoretical, and research implications, including calling for a national database of kernels that influence human behavior
Ca, Mg, Zn, Fe, Cu and Mn content of ass’s milk
Abstract - The aim of this study was to determine Ca, Mg, Zn, Fe, Cu and Mn content of ass’s milk. Twenty four individual milk samples were collected from 4 lactating asses. During the experimental period milk samples were collected every 3 weeks interval, using a milking machine; asses were housed with the foals that were separated from the jennets 3 hours before milking. Milk was analysed for Ca, Mg, Zn, Fe, Cu and Mn content by atomic absorption spectrometry. The concentration mean (±SD) of Ca Mg, Zn, Fe, and Cu were respectively 334.61±39.80, 58.46±8.43, 1.99±0.51, 1.15±0.52, 0.16±0.06 mg/kg. Mn was found only at trace level. Iron content of ass’s milk was the most variable ranging from 0.43 to 1.88 mg/kg. Correlation coefficients were positive and significant between Ca and Mg (r=0.63), Zn and Mg (r=0.45), Zn and Fe (r=0.49) and Zn and Cu (r=0.50). In this study, except for Fe, mean concentration of Ca, Mg, Zn, and Cu in ass’s milk was similar to those reported in literature for human milk
Feeding installation for total mixed ration: effects on buffalo milk yield and composition
If horses had toes: demonstrating mirror self recognition at group level in Equus caballus
Mirror self-recognition (MSR), investigated in primates and recently in non-primate species, is considered a measure of self-awareness. Nowadays, the only reliable test for investigating MSR potential skills consists in the untrained response to a visual body mark detected using a reflective surface. Here, we report the first evidence of MSR at group level in horses, by facing the weaknesses of methodology present in a previous pilot study. Fourteen horses were used in a 4-phases mirror test (covered mirror, open mirror, invisible mark, visible colored mark). After engaging in a series of contingency behaviors (looking behind the mirror, peek-a-boo, head and tongue movements), our horses used the mirror surface to guide their movements towards their colored cheeks, thus showing that they can recognize themselves in a mirror. The analysis at the group level, which ‘marks’ a turning point in the analytical technique of MSR exploration in non-primate species, showed that horses spent a longer time in scratching their faces when marked with the visible mark compared to the non-visible mark. This finding indicates that horses did not see the non-visible mark and that they did not touch their own face guided by the tactile sensation, suggesting the presence of MSR in horses. Although a heated debate on the binary versus gradualist model in the MSR interpretation exists, recent empirical pieces of evidence, including ours, indicate that MSR is not an all-or-nothing phenomenon that appeared once in phylogeny and that a convergent evolution mechanism can be at the basis of its presence in phylogenetically distant taxa
Exploitation and differentiation of beef meat as a traditional product in Alto Tammaro and Fortore area: preliminary results of an exploratory research
- …