61 research outputs found
Long-ranged magnetic proximity effects in noble metal-doped cobalt probed with spin-dependent tunnelling
We inserted non-magnetic layers of Au and Cu into sputtered AlO-based magnetic tunnel junctions and MeserveyâTedrow junctions in order to study their effect on tunnelling magnetoresistance (TMR) and spin polarization (TSP). When either Au or Cu are inserted into a Co/AlO interface, we find that TMR and TSP remain finite and measurable for thicknesses up to several nanometres. High-resolution transmission electron microscopy shows that the Cu and Au interface layers are fully continuous when their thickness exceeds ~3nm, implying that spin-polarized carriers penetrate the interface noble metal to distances exceeding this value. A power law model based on exchange scattering is found to fit the data better than a phenomenological exponential decay. The discrepancy between these length scales and the much shorter ones reported from x-ray magnetic circular dichroism studies of magnetic proximitization is ascribed to the fact that our tunnelling transport measurements selectively probe s-like electrons close to the Fermi level. When a 0.1 nm thick Cu or Au layer is inserted within the Co, we find that the suppression of TMR and TSP is restored on a length scale of ≤ 1nm, indicating that this is a sufficient quantity of Co to form a fully spin-polarized band structure at the interface with the tunnel barrier
Correction of EELS dispersion non-uniformities for improved chemical shift analysis
We outline a simple routine to correct for non-uniformities in the energy dispersion of a post-column electron energy-loss spectrometer for use in scanning transmission electron microscopy. We directly measure the dispersion and its variations by sweeping a spectral feature across the full camera to produce a calibration that can be used to linearize datasets post-acquisition, without the need for reference materials. The improvements are illustrated using core excitation electron energy-loss spectroscopy (EELS) spectra collected from NiO and diamond samples. The calibration is rapid and will be of use in all EELS analysis, particularly in assessments of the chemical states of materials via the chemical shift of core-loss excitations
An in-situ approach for preparing atom probe tomography specimens by xenon plasma-focused ion beam
A method for the rapid preparation of atom probe tomography (APT) needles using a xenon plasma-focused ion beam (FIB) instrument is presented and demonstrated on a test sample of Ti-6Al-4V alloy. The method requires significantly less operator input than the standard lift-out protocol, is site-specific and produces needles with minimal ion-beam damage; electron microscopy indicated the needle's surface amorphised/oxidised region to be less than 2 nm thick. The resulting needles were routinely analysable by APT, confirming the expected microstructure and showing negligible Xe contamination
Erratum: âSeed layer technique for high quality epitaxial manganite filmsâ [AIP Advances 6, 085109 (2016)]
No abstract available
Controlling magnetic anisotropy in La<sub>0.7</sub>Sr<sub>0.3</sub>MnO<sub>3</sub> nanostructures
We have developed a chlorine based dry etching process for nanopatterning the ferromagnetic oxide La<sub>0.7</sub>Sr<sub>0.3</sub>MnO<sub>3</sub> (LSMO). Large arrays of millions of identical structures have been fabricated from thin LSMO films by electron-beam lithography and reactive ion etching. SQUID magnetometry demonstrates that patterned nanostructures with lateral dimensions down to 100ânm retain their full magnetization and the Curie temperature of the bulk layer. In addition, their shape anisotropy is sufficient to overcome the crystalline anisotropy of the bulk. High resolution scanning transmission electron microscopy shows that crystallinity is preserved even at the edges of the nanostructures
Muon studies of Li+ diffusion in LiFePO4 nanoparticles of different polymorphs
The lithium diffusion in nanostructured olivine LiFePO4 has been investigated for the first time using muon spectroscopy (ÎŒSR). A microwave-assisted approach has been employed for nanoparticle preparation, where the choice of solvent is shown to play an important role in determining particle morphology and crystal chemistry. Two phases have been obtained: Pnma LiFePO4 and the high pressure Cmcm phase. The Li+ diffusion behaviour is strikingly different in both phases, with DLi of 6.25 Ă 10â10 cm2 sâ1 obtained for Pnma LiFePO4 in good agreement with measurements of bulk materials. In contrast, Li+ diffusion is impeded with the addition of the high pressure Cmcm phase, with a lower DLi of 3.96 Ă 10â10 cm2 sâ1 noted. We have demonstrated an efficient microwave route to nanoparticle synthesis of positive electrode materials and we have also shown ÎŒSR measurements to be a powerful probe of Li+ diffusion behaviour in nanoparticles
The structural analysis of Cu(111)-Te (â3 Ă â3) R30° and (2â3 Ă 2â3)R30° surface phases by quantitative LEED and DFT,
The chemisorption of tellurium on atomically clean Cu(111) surface has been studied under ultra-high vacuum conditions. At room temperature, the initial stage of growth was an ordered 23Ă23R30° phase (0.08 ML). An ordered 3Ă3R30° phase is formed at 0.33 ML coverage of Te. The adsorption sites of the Te atoms on the Cu(111) surface at 0.08 ML and 0.33 ML coverages are explored by quantitative low energy electron diffraction (LEED) and density functional theory (DFT). Our results indicate that substitutional surface alloy formation starts at very low coverages
Fabrication of high quality plan-view TEM specimens using the focused ion beam
We describe a technique using a focused ion beam instrument to fabricate high quality plan-view specimens for transmission electron microscopy studies. The technique is simple, site-specific and is capable of fabricating multiple large, >100 ÎŒm2 electron transparent windows within epitaxially-grown thin films. A film of La0.67Sr0.33MnO3 is used to demonstrate the technique and its structural and functional properties are surveyed by high resolution imaging, electron spectroscopy, atomic force microscopy and Lorentz electron microscopy. The window is demonstrated to have good thickness uniformity and a low defect density that does not impair the filmâs Curie temperature. The technique will enable the study of inâplane structural and functional properties of a variety of epitaxial thin film systems
The templated growth of a chiral transition metal chalcogenide
We demonstrate that an intrinsically chiral, high Miller index surface of an achiral metal can be used to template the enantioselective growth of chiral transition metal chalcogenide films. Specifically, Cu(643)R can be used as a template for the enantioselective growth of a chiral copper telluride alloy surface. Beyond a critical alloy thickness the chiral influence of the Cu(643)R surface diminishes and an achiral surface forms. Our work demonstrates a new method of producing chiral transition metal chalcogenide surfaces, with potential applications in the study of structurally chiral topological insulators
- âŠ