INVESTIGATION OF BULGING BEHAVIOR OF COKE DRUM -A PRACTICAL ANALYSIS OF BULGING UNDER COMPLEX QUENCH CONDITIONS

ABSTRACT Coke drums undergo cyclic operations typically in the temperature range from room temperature to about 500°C (930°F). During quenching, the coke drum is inevitably subjected to a rapid drop in temperature because cooling water is injected directly into the coke drum through the bottom inlet nozzle. The temperature profile on the shell surface is uneven during quenching, and can vary in each cycle of the quenching operation. Such a complicated thermal profile induces large strains in the shell portion of the coke drum, and eventually causes damage like bulging and/or cracking. INTRODUCTION Coke drums in oil refineries are designed to upgrade and convert petroleum residuum into liquid and gas product streams leaving behind a solid concentrated petroleum coke. Coke drum diameters range from 4 to 9.8meters (13 to 32') with the straight side being around 25meters (82'). Usually the drum is fabricated from more than 25mm (2") thickness of chromemolybdenum low alloy steel and is clad internally with 2.8mm (7/64") of stainless steel for protection against sulfur corrosion. The outside of the drum is insulated with around 10cm (4") of fiberglass insulation. The authors have investigated the bulging behavior of the coke drum by the thermal elastic-plastic FE-analysis, considering the existence of the overmatch welds and uneven temperature field during quenchin

Photon correlation in GaAs self-assembled quantum dots

We report on photon coincidence measurement in a single GaAs self-assembled quantum dot (QD) using a pulsed excitation light source. At low excitation, when a neutral exciton line was present in the photoluminescence (PL) spectrum, we observed nearly perfect single photon emission from an isolated QD at 670 nm wavelength. For higher excitation, multiple PL lines appeared on the spectra, reflecting the formation of exciton complexes. Cross-correlation functions between these lines showed either bunching or antibunching behavior, depending on whether the relevant emission was from a biexciton cascade or a charged exciton recombination.Comment: 5 pages, 3 figure

Studies on Expression of Aldehyde Dehydrogenase in Normal and Cancerous Tissues of Thyroids

Recently published articles have reported the controversial data regarding expression of aldehyde dehydrogenase isozyme 1A1 (ALDH1A1), a potential candidate marker for normal and cancer stem cells (CSCs), in thyroid tissues. These data prompted us to re-evaluate expression of ALDH1A1 in normal and cancerous thyroid tissues by 2 different means. The first method was immunohistochemistry with 2 different anti-ALDH1A1 antibodies from distinct companies. Following validating the integrity of these 2 antibodies by Western blotting with ALDH-expressing and nonexpressing cancer cell lines and immunohistochemistry with breast and colon tissues, we report here significant and comparable expression of ALDH1A1 in both normal and cancerous thyroid tissues with both antibodies. Next, relative expression levels of ALDH isozymes were evaluated by reverse transcription-polymerase chain reaction (RT-PCR), revealing that ALDH1A1 was the most highly expressed isozyme followed by ALDH9A1 and relative expression patterns of isozymes were very similar in normal and cancerous tissues. All these data demonstrate that thyroid cells of normal and cancer origins do express ALDH1A1 and to a lesser extent 9A1. Further study will be necessary to study functional significance of ALDH1A1 in the function and behaviors of thyroid normal and cancer stem cells

Degenerative changes in the appendicular joints of ancient human populations from the Japan Islands

Degenerative changes in six major limb joints were investigated to compare their prevalence among five ancient skeletal populations from the Japan Islands. The populations assessed in this study consisted of the farmers in the northern Kyushu/Yamaguchi area and the foragers from the northwestern Kyushu area from the Yayoi period (5th century BC to 3rd century AD); the Okhotsk (5th to 12th centuries AD) foragers from Hokkaido and Sakhalin; the common people from medieval Kamakura (12th to 14th centuries AD) in Kanto, central Japan; and the early-modern farmers (17th to 19th centuries AD) from Kumejima, in the southernmost island chain (Ryukyu Islands). Crude prevalence comparisons showed that the shoulder and hip joints were principally affected in early-modern Kumejima and medieval Kamakura, which contrasted with the high prevalence of elbow and knee joint changes in the Okhotsk people. The heavy dependence on marine mammals and fish for dietary protein intake probably required flexion and extension movements of the most severely degenerated joints in the Okhotsk people. The northern Kyushu/Yamaguchi and northwestern Kyushu Yayoi peoples were more affected by degeneration in the wrist joints than others, possibly due to their use of innovative tools such as stone or shell knives and harpoons. A multivariate logistic regression analysis, adjusted for age, region, and sex as the predictor variables for degenerative changes in joints, was applied to only the two samples from Kumejima and Kamakura (including previously reported spine data) because of their better preservation. This revealed differences in the prevalence of changes in some joints; for example, age-related changes were recognized. The Kumejima people were more commonly affected by hip and knee joint changes, whereas the Kamakura people were more commonly affected by changes to apophyseal joints. Because a stable isotope analysis indicated that the trophic levels of the two populations were almost the same, the pattern of degenerative changes would have reflected differences in their specific workloads, such as wet rice cultivation using a peculiar hoe by the Kumejima people. This study, combining multivariate logistic regression analysis of degenerative joint changes and stable isotope analyses, uses large skeletal populations to add clarity to the actual rigors of ancient life. © 2015 Elsevier Ltd and INQUA

Model-based speed and parameter tracking for induction machines

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1989.Includes bibliographical references (leaves 126-128).by Kazuaki Minami.M.S