Cosmic ray composition between 10 to the 15th power - 10 to the 17th power eV obtained by air shower experiments

Based on the air shower data, the chemical composition of the primary cosmic rays in the energy range 10 to the 15th power - 10 to the 17th power eV was obtained. The method is based on a well known N sub e-N sub mu and N sub e-N sub gamma. The simulation is calibrated by the CERN SPS pp collider results

A new method to determine the chemical composition of the cosmic rays beyond 10 to the 15th power eV

The chemical composition of primary cosmic rays beyond 10 to the 15th power eV could not be measured by the direct method. A more sensitive method to determine the chemical composition is proposed. The method was checked by simulation and compared with existing data on N sub e-N sub mu and N sub e-N sub gamma

Power Spectra of X-ray Binaries

The interpretation of Fourier spectra in the time domain is critically examined. Power density spectra defined and calculated in the time domain are compared with Fourier spectra in the frequency domain for three different types of variability: periodic signals, Markov processes and random shots. The power density spectra for a sample of neutron stars and black hole binaries are analyzed in both the time and the frequency domains. For broadband noise, the two kinds of power spectrum in accreting neutron stars are usually consistent with each other, but the time domain power spectra for black hole candidates are significantly higher than corresponding Fourier spectra in the high frequency range (10--1000 Hz). Comparing the two kinds of power density spectra may help to probe the intrinsic nature of timing phenomena in compact objects.Comment: 21 pages, 10 figures, to appear in Astrophysical Journa

A three-dimensional Monte Carlo calculation of the photon initiated showers and Kiel result

The Kiel experimental results indicate an existence of the ultra high-energy gamma-rays coming from Cyg. X-3. However the result indicates that the number of the muons included in the photon initiated shower is the same as the number included in the proton initiated showers. According to our Monte Carlo calculation as shown in the graph of underpart, the number of muons included in the photon initiated showers should be less than 1/15 of the photon's. The previous simulation was made under one dimensional approximation. This time the result of three dimensional calculation is reported

Discipline report on thermal analyses of M551, M552, and M553 experiments

Reduced gravity does not significantly affect the thermal histories in the M551 specimen, even if molten metal flow pattern is different from that in terrestrial conditions. Thermal histories corresponding to terrestrial experimental conditions were calculated by use of the computer programs. Heat conduction through brazing alloy (M552 experiment) is improved in the Skylab conditions, because of the increased extent, rate and uniformity of braze spreading in space. Effects of reduced gravity on heat flow in the M553 specimen are insignificant, because convection effects appear instantaneously and conduction is a governing factor on the heat flow

Thermal analysis of M552 experiment for materials processing in space

Analytical and experimental studies made of heat flow in the exothermic brazing unit in the M552 experiment are described. The emphasis of the studies was placed on heat flow in the tube and the sleeve during a period from ignition to the time when the brazing alloy solidifies. Experiments were made of three specimens tested in a ground-based laboratory. Heat flow was determined by thermocouples. The analytical study covered two phases: (1) the effect of reduced gravity on heat flow in the exothermic brazing unit; and (2) the development of analytical models. The major mode of heat transfer was conduction and the effect of gravity was minimal. Good agreements were obtained between experimental and analytical results indicating the soundness of the analytical models