The Average Facial Expression of a Crowd Influences Impressions of Individual Expressions

People can accurately assess the “mood of a crowd” by rapidly extracting the average intensity of all the individual expressions, when the crowd consists of a set of faces comprising different expressions of the same individual. Here, we investigate the processes involved when people judge the expression intensity of individual faces that appear in the context of a more naturalistic crowd of different individuals’ faces. We show that judgments of the intensity of happy and angry expressions for individual faces are biased toward the group mean expression intensity, even when the faces are all different individuals. In a second experiment, we demonstrate that this bias is not due to a generic tendency to endorse intermediate intensity expressions more frequently than more extreme intensity expressions. Together, these findings suggest that people integrate ensemble information about the group average expression when they make judgments of individual faces’ expressions

Prognostic Value of Indeterminable Anaerobic Threshold in Heart Failure.

Background In patients with heart failure (HF), during maximal cardiopulmonary exercise test, anaerobic threshold (AT) is not always identified. We evaluated whether this finding has a prognostic meaning. Methods and Results We recruited and prospectively followed up, in 14 dedicated HF units, 3058 patients with systolic (left ventricular ejection fraction <40%) HF in stable clinical conditions, New York Heart Association class I to III, who underwent clinical, laboratory, echocardiographic, and cardiopulmonary exercise test investigations at study enrollment. We excluded 921 patients who did not perform a maximal exercise, based on lack of achievement of anaerobic metabolism (peak respiratory quotient 1.05). Primary study end point was a composite of cardiovascular death and urgent cardiac transplant, and secondary end point was all-cause death. Median follow-up was 3.01 (1.39-4.98) years. AT was identified in 1935 out of 2137 patients (90.54%). At multivariable logistic analysis, failure in detecting AT resulted significantly in reduced peak oxygen uptake and higher metabolic exercise and cardiac and kidney index score value, a powerful prognostic composite HF index (P<0.001). At multivariable analysis, the following variables were significantly associated with primary study end point: peak oxygen uptake (% pred; P<0.001; hazard ratio [HR]=0.977; confidence interval [CI]=0.97-0.98), ventilatory efficiency slope (P=0.01; HR=1.02; CI=1.01-1.03), hemoglobin (P<0.05; HR=0.931; CI=0.87-1.00), left ventricular ejection fraction (P<0.001; HR=0.948; CI=0.94-0.96), renal function (modification of diet in renal disease; P<0.001; HR=0.990; CI=0.98-0.99), sodium (P<0.05; HR=0.967; CI=0.94-0.99), and AT nonidentification (P<0.05; HR=1.41; CI=1.06-1.89). Nonidentification of AT remained associated to prognosis also when compared with metabolic exercise and cardiac and kidney index score (P<0.01; HR=1.459; CI=1.09-1.10). Similar results were obtained for the secondary study end point. Conclusions The inability to identify AT most often occurs in patients with severe HF, and it has an independent prognostic role in HF

Objective and subjective assessment of sleep in chronic low back pain patients compared with healthy age and gender matched controls: a pilot study

<p>Abstract</p> <p>Background</p> <p>While approximately 70% of chronic low back pain (CLBP) sufferers complain of sleep disturbance, current literature is based on self report measures which can be prone to bias and no objective data of sleep quality, based exclusively on CLBP are available. In accordance with the recommendations of The American Sleep Academy, when measuring sleep, both subjective and objective assessments should be considered as the two are only modestly correlated, suggesting that each modality assesses different aspects of an individual's sleep experience. Therefore, the purpose of this study was to expand previous research into sleep disturbance in CLBP by comparing objective and subjective sleep quality in participants with CLBP and healthy age and gender matched controls, to identify correlates of poor sleep and to test logistics and gather information prior to a larger study.</p> <p>Methods</p> <p>15 CLBP participants (mean age = 43.8 years (SD = 11.5), 53% female) and 15 healthy controls (mean age = 41.5 years (SD = 10.6), 53% female) consented. All participants completed the Pittsburgh Sleep Quality Index, Insomnia Severity Index, Pittsburgh Sleep Diary and the SF36v2. CLBP participants also completed the Oswestry Disability Index. Sleep patterns were assessed over three consecutive nights using actigraphy. Total sleep time (TST), sleep efficiency (SE), sleep latency onset (SL) and number of awakenings after sleep onset (WASO) were derived. Statistical analysis was conducted using unrelated t-tests and Pearson's product moment correlation co-efficients.</p> <p>Results</p> <p>CLBP participants demonstrated significantly poorer overall sleep both objectively and subjectively. They demonstrated lower actigraphic SE (p = .002) and increased WASO (p = .027) but no significant differences were found in TST (p = .43) or SL (p = .97). Subjectively, they reported increased insomnia (p =< .001), lower SE (p =< .001) and increased SL (p =< .001) but no difference between TST (p = .827) and WASO (p = .055). Statistically significant associations were found between low back pain (p = .021, r = -.589), physical health (p = .003, r = -.713), disability levels (p = .025, r = .576), and subjective sleep quality in the CLBP participants but not with actigraphy.</p> <p>Conclusion</p> <p>CLBP participants demonstrated poorer overall sleep, increased insomnia symptoms and less efficient sleep. Further investigation using a larger sample size and a longer period of sleep monitoring is ongoing.</p

Copy Number Variation of CCL3-like Genes Affects Rate of Progression to Simian-AIDS in Rhesus Macaques (Macaca mulatta)

Variation in genes underlying host immunity can lead to marked differences in susceptibility to HIV infection among humans. Despite heavy reliance on non-human primates as models for HIV/AIDS, little is known about which host factors are shared and which are unique to a given primate lineage. Here, we investigate whether copy number variation (CNV) at CCL3-like genes (CCL3L), a key genetic host factor for HIV/AIDS susceptibility and cell-mediated immune response in humans, is also a determinant of time until onset of simian-AIDS in rhesus macaques. Using a retrospective study of 57 rhesus macaques experimentally infected with SIVmac, we find that CCL3L CNV explains approximately 18% of the variance in time to simian-AIDS (p<0.001) with lower CCL3L copy number associating with more rapid disease course. We also find that CCL3L copy number varies significantly (p<10−6) among rhesus subpopulations, with Indian-origin macaques having, on average, half as many CCL3L gene copies as Chinese-origin macaques. Lastly, we confirm that CCL3L shows variable copy number in humans and chimpanzees and report on CCL3L CNV within and among three additional primate species. On the basis of our findings we suggest that (1) the difference in population level copy number may explain previously reported observations of longer post-infection survivorship of Chinese-origin rhesus macaques, (2) stratification by CCL3L copy number in rhesus SIV vaccine trials will increase power and reduce noise due to non-vaccine-related differences in survival, and (3) CCL3L CNV is an ancestral component of the primate immune response and, therefore, copy number variation has not been driven by HIV or SIV per se

Topical Application of Activity-based Probes for Visualization of Brain Tumor Tissue

Several investigators have shown the utility of systemically delivered optical imaging probes to image tumors in small animal models of cancer. Here we demonstrate an innovative method for imaging tumors and tumor margins during surgery. Specifically, we show that optical imaging probes topically applied to tumors and surrounding normal tissue rapidly differentiate between tissues. In contrast to systemic delivery of optical imaging probes which label tumors uniformly over time, topical probe application results in rapid and robust probe activation that is detectable as early as 5 minutes following application. Importantly, labeling is primarily associated with peri-tumor spaces. This methodology provides a means for rapid visualization of tumor and potentially infiltrating tumor cells and has potential applications for directed surgical excision of tumor tissues. Furthermore, this technology could find use in surgical resections for any tumors having differential regulation of cysteine cathepsin activity

Compound A, a Dissociated Glucocorticoid Receptor Modulator, Inhibits T-bet (Th1) and Induces GATA-3 (Th2) Activity in Immune Cells

Background: Compound A (CpdA) is a dissociating non-steroidal glucocorticoid receptor (GR) ligand which has antiinflammatory properties exerted by down-modulating proinflammatory gene expression. By favouring GR monomer formation, CpdA does not enhance glucocorticoid (GC) response element-driven gene expression, resulting in a reduced side effect profile as compared to GCs. Considering the importance of Th1/Th2 balance in the final outcome of immune and inflammatory responses, we analyzed how selective GR modulation differentially regulates the activity of T-bet and GATA-3, master drivers of Th1 and Th2 differentiation, respectively. Results: Using Western analysis and reporter gene assays, we show in murine T cells that, similar to GCs, CpdA inhibits T-bet activity via a transrepressive mechanism. Different from GCs, CpdA induces GATA-3 activity by p38 MAPK-induction of GATA-3 phosphorylation and nuclear translocation. CpdA effects are reversed by the GR antagonist RU38486, proving the involvement of GR in these actions. ELISA assays demonstrate that modulation of T-bet and GATA-3 impacts on cytokine production shown by a decrease in IFN-c and an increase in IL-5 production, respectively. Conclusions: Taken together, through their effect favoring Th2 over Th1 responses, particular dissociated GR ligands, fo

Passive and Motivated Perception of Emotional Faces: Qualitative and Quantitative Changes in the Face Processing Network

Emotionally expressive faces are processed by a distributed network of interacting sub-cortical and cortical brain regions. The components of this network have been identified and described in large part by the stimulus properties to which they are sensitive, but as face processing research matures interest has broadened to also probe dynamic interactions between these regions and top-down influences such as task demand and context. While some research has tested the robustness of affective face processing by restricting available attentional resources, it is not known whether face network processing can be augmented by increased motivation to attend to affective face stimuli. Short videos of people expressing emotions were presented to healthy participants during functional magnetic resonance imaging. Motivation to attend to the videos was manipulated by providing an incentive for improved recall performance. During the motivated condition, there was greater coherence among nodes of the face processing network, more widespread correlation between signal intensity and performance, and selective signal increases in a task-relevant subset of face processing regions, including the posterior superior temporal sulcus and right amygdala. In addition, an unexpected task-related laterality effect was seen in the amygdala. These findings provide strong evidence that motivation augmentsco-activity among nodes of the face processing network and the impact of neural activity on performance. These within-subject effects highlight the necessity to consider motivation when interpreting neural function in special populations, and to further explore the effect of task demands on face processing in healthy brains

Production and processing of graphene and related materials

© 2020 The Author(s). We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resourceconsuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown