EQ-5D-5L population norms and health inequalities for Trinidad and Tobago

The EQ-5D instrument is now used in many health systems as a health outcomes measure. Recently an EQ-5D valuation study was conducted for Trinidad and Tobago, but thus far there have been no population norms published for Trinidad and Tobago or for any Caribbean country. The objective of this study is to provide a set of population norms, and to investigate inequalities in health in Trinidad and Tobago. The EQ-5D-5L questionnaire was included in the 2012/2013 Adult Population Survey of the Global Entrepreneurship Monitor for Trinidad and Tobago. This survey covered a representative sample of 2,036 adults aged 18 and over. Demographic data and self-reported health using EQ-5D-5L were collected. The Trinidad and Tobago value set was used to obtain EQ-5D index values. The Kakwani index and logistic regression models were used to evaluate inequalities in health. Mean EQ-5D index values and EQ-VAS values were calculated by age group, ethnicity, gender, income, educational attainment, employment status and place of residence. The 10 most commonly observed EQ-5D-5L states accounted for 90% of the respondents. The mean VAS value for the sample was 83.6 and the mean EQ-5D-5L index value was 0.95. Pain/discomfort was found to be the EQ-5D dimension with the highest prevalence of reported problems with 22% of the population reporting pain at any level. Self-care was the dimension with the lowest prevalence of problems reported at any level (3%). Health declines with increasing age, and men reported fewer problems and higher levels of self-reported health than women. Age, gender and education level were found to be important drivers of health status as measured by the EQ-5D instrument. Being in a very low income group was also observed to affect EQ-VAS values among younger respondents. The population norms provided in this study can be used by clinicians, academics and policy makers in several ways. They can be used in comparing different demographic groups or patient groups, or as a basis for tracking the progress of patients through a treatment regimen. They can also provide a baseline for cost utility analysis of health interventions for Trinidad and Tobago

Disability Adjusted Life Years and minimal disease: application of a preference-based relevance criterion to rank enteric pathogens

Background: Burden of disease estimates, which combine mortality and morbidity into a single measure, are used increasingly for priority setting in disease control, prevention and surveillance. However, because there is no clear exclusion criterion for highly prevalent minimal disease in burden of disease studies its application may be restricted. The aim of this study was to apply a newly developed relevance criterion based on preferences of a population panel, and to compare burden of disease estimates of five foodborne pathogens calculated with and without application of this criterion. Methods: Preferences for twenty health states associated with foodborne disease were obtained from a population panel (n = 107) with the Visual Analogue Scale and the Time Trade-off (TTO) technique. The TTO preferences were used to derive the relevance criterion: if at least 50% of a panel of judges is willing to trade-off time in order to be restored to full health the health state is regarded as relevant, i.e. TTO median is greater than 0. Subsequently, the burden of disease of each of the five foodborne pathogens was calculated both with and without the relevance criterion. Results: The panel ranked the health states consistently. Of the twenty health states, three did not meet the preference-based relevance criterion. Application of the relevance criterion reduced the burden of disease estimate of all five foodborne pathogens. The reduction was especially significant for norovirus and rotavirus, decreasing with 94% and 78% respectively. Conclusion: Individual preferences elicited with the T

Development and preliminary testing of the new five-level version of EQ-5D (EQ-5D-5L)

This article introduces the new 5-level EQ-5D (EQ-5D-5L) health status measure. EQ-5D currently measures health using three levels of severity in five dimensions. A EuroQol Group task force was established to find ways of improving the instrument's sensitivity and reducing ceiling effects by increasing the number of severity levels. The study was performed in the United Kingdom and Spain. Severity labels for 5 levels in each dimension were identified using response scaling. Focus groups were used to investigate the face and content validity of the new versions, including hypothetical health states generated from those versions. Selecting labels at approximately the 25th, 50th, and 75th centiles produced two alternative 5-level versions. Focus group work showed a slight preference for the wording 'slight-moderate-severe' problems, with anchors of 'no problems' and 'unable to do' in the EQ-5D functional dimensions. Similar wording was used in the Pain/Discomfort and Anxiety/Depression dimensions. Hypothetical health states were well understood though participants stressed the need for the internal coherence of health states. A 5-level version of the EQ-5D has been developed by the EuroQol Group. Further testing is required to determine whether the new version improves sensitivity and reduces ceiling effects

Criteria for developing, assessing and selecting candidate EQ-5D bolt-ons.

PURPOSE: 'Bolt-on' dimensions are additional items added to multi-attribute utility instruments (MAUIs) such as EQ-5D that measure constructs not included in the core descriptive system. The use of bolt-ons has been proposed to improve the content validity and responsiveness of the descriptive system in certain settings and health conditions. EQ-5D bolt-ons serve a particular purpose and thus satisfy a certain set of criteria. The aim of this paper is to propose a set of criteria to guide the development, assessment and selection of candidate bolt-on descriptors. METHODS: Criteria were developed using an iterative approach. First, existing criteria were identified from the literature including those used to guide the development of MAUIs, the COSMIN checklist and reviews of existing bolt-ons. Second, processes used to develop bolt-ons based on qualitative and quantitative approaches were considered. The information from these two stages was formalised into draft development and selection criteria. These were reviewed by the project team and iteratively refined. RESULTS: Overall, 23 criteria for the development, assessment and selection of candidate bolt-ons were formulated. Development criteria focused on issues relating to i) structure, ii) language, and iii) consistency with the existing EQ-5D dimension structure. Assessment and selection criteria focused on face and content validity and classical psychometric indicators. CONCLUSION: The criteria generated can be used to guide the development of bolt-ons across different health areas. They can also be used to assess existing bolt-ons, and inform their inclusion in studies and patient groups where the EQ-5D may lack content validity

Different Imaging Strategies in Patients With Possible Basilar Artery Occlusion Cost-Effectiveness Analysis

Background and Purpose-This study evaluated the cost-effectiveness of different noninvasive imaging strategies in patients with possible basilar artery occlusion. Methods-A Markov decision analytic model was used to evaluate long-term outcomes resulting from strategies using computed tomographic angiography (CTA), magnetic resonance imaging, nonenhanced CT, or duplex ultrasound with intravenous (IV) thrombolysis being administered after positive findings. The analysis was performed from the societal perspective based on US recommendations. Input parameters were derived from the literature. Costs were obtained from United States costing sources and published literature. Outcomes were lifetime costs, quality-adjusted life-years (QALYs), incremental cost-effectiveness ratios, an

Residual Stress Relaxation Induced by Mass Transport Through Interface of the Pd/SrTiO3

Metal interconnections having a small cross-section and short length can be subjected to very large mass transport due to the passing of high current densities. As a result, nonlinear diffusion and electromigration effects which may result in device failure and electrical instabilities may be manifested. Various thicknesses of Pd were deposited over SrTiO3 substrate. Residual stress of the deposited film was evaluated by measuring the variation of d-spacing versus sin2ψ through conventional X-ray diffraction method. It has been found that the lattice misfit within film and substrate might be relaxed because of mass transport. Besides, the relation between residual intrinsic stress and oxygen diffusion through deposited film has been expressed. Consequently, appearance of oxide intermediate layer may adjust interfacial characteristics and suppress electrical conductivity by increasing electron scattering through metallic films

Mapping the disease-specific LupusQoL to the SF-6D

Purpose To derive a mapping algorithm to predict SF-6D utility scores from the non-preference-based LupusQoL and test the performance of the developed algorithm on a separate independent validation data set. Method LupusQoL and SF-6D data were collected from 320 patients with systemic lupus erythematosus (SLE) attending routine rheumatology outpatient appointments at seven centres in the UK. Ordinary least squares (OLS) regression was used to estimate models of increasing complexity in order to predict individuals’ SF-6D utility scores from their responses to the LupusQoL questionnaire. Model performance was judged on predictive ability through the size and pattern of prediction errors generated. The performance of the selected model was externally validated on an independent data set containing 113 female SLE patients who had again completed both the LupusQoL and SF-36 questionnaires. Results Four of the eight LupusQoL domains (physical health, pain, emotional health, and fatigue) were selected as dependent variables in the final model. Overall model fit was good, with R2 0.7219, MAE 0.0557, and RMSE 0.0706 when applied to the estimation data set, and R2 0.7431, MAE 0.0528, and RMSE 0.0663 when applied to the validation sample. Conclusion This study provides a method by which health state utility values can be estimated from patient responses to the non-preference-based LupusQoL, generalisable beyond the data set upon which it was estimated. Despite concerns over the use of OLS to develop mapping algorithms, we find this method to be suitable in this case due to the normality of the SF-6D data

Introducing the composite time trade-off: a test of feasibility and face validity

__Abstract__ __Introduction__ This study was designed to test the feasibility and face validity of the composite time trade-off (composite TTO), a new approach to TTO allowing for a more consistent elicitation of negative health state values. __Methods__ The new instrument combines a conventional TTO to elicit values for states regarded better than dead and a lead-time TTO for states worse than dead. __Results__ A total of 121 participants completed the composite TTO for ten EQ-5D-5L health states. Mean values ranged from −0.104 for health state 53555 to 0.946 for 21111. The instructions were clear to 98 % of the respondents, and 95 % found the task easy to understand, indicating feasibility. Further, the average number of steps taken in the iteration procedure to achieve the point of indifference in the TTO and the average duration of each task were indicative of a deliberate cognitive process. __Conclusion__ Face validity was confirmed by the high mean values for the mild health states (>0.90) and low mean values for the severe states (<0.42). In conclusion, this study demonstrates the feasibility and face validity of the composite TTO in a face-to-face standardized computer-assisted interview setting

Correction to: Comparing the UK EQ-5D-3L and English EQ-5D-5L Value Sets.

The article Comparing the UK EQ-5D-3L and English EQ-5D-5L Value Sets, written by Brendan Mulhern, Yan Feng, Koonal Shah, Mathieu F. Janssen, Michael Herdman, Ben van Hout, Nancy Devlin was originally published electronically on the publisher's internet portal (currently SpringerLink) on February 23, 2018 without open access