789 research outputs found
Sorgo granífero (Sorghum bicolor (L.) Moench) de alta lisina no Brasil.
Pequenas quantidades de sementes de duas linhagens de sorgo, com um gene recessivo simples para lisina, descoberto recentemente na Colecao Mundial de Sorgos da Universidade de Purdue, West Lafayette, Indiana, U.S.A., foram plantas para multiplicacao de sementes pela EMBRAPA e pela EPAMIG em Sete Lagoas, Minas Gerais. As linhagens mostraram nao adaptadas, com porte alto, maturidade tardia e susceptibilidade a doencas. Sementes geneticas de duas linhagens de alta lisina e algumas selecoes de porte baixo e precoce poderao ser requisitadas. As propriedades quimicas e biologicas do sorgo com o mutante para alta lisina foram previamente revisadas
Análise da produção brasileira de frutas a partir do armazém de dados da fruticultura.
Armazém de dados da fruticultura. Integração dos dados de produção de frutas. Análise da produção brasileira de frutas.bitstream/CNPTIA/9872/1/comuntec18_0.pd
Análise de comércio exterior de frutas a partir do armazém de dados da fruticultura brasileira.
O objetivo geral do Programa é elevar os padrões de qualidade e competitividade da fruticultura brasileira ao patamar de excelência requerido pelo mercado internacional, paradigma que será efetivado com o avanço da capacidade produtiva e gerencial dos produtores de frutas e a ampliação dos mercados interno e externo. São contempladas ações em diversas áreas, como inovação tecnológica, capacitação de fruticultores, controle de pragas na fruticultura, campanha para promoção das frutas brasileiras, entre outras.bitstream/CNPTIA/9175/1/COMNICADOTEC2.pd
Modelling the Contribution of 40K, 232Th and 226Ra to Radiation Dose and Risk from Airborne Discharges of Coal-Fired Power Plants
Coal contains trace elements and naturally occurring radionuclides such as 40K,
232Th, 238U. When coal is burned, minerals, including most of the radionuclides, do
not burn and concentrate in the ash several times in comparison with their content in
coal. Usually, a small fraction of the fly ash produced (2-5%) is released into the
atmosphere.
The activities released depend on many factors (concentration in coal, ash content
and inorganic matter of the coal, combustion temperature, ratio between bottom and
fly ash, filtering system). Therefore, marked differences should be expected between
the by-products produced and the amount of activity discharged (per unit of energy
produced) from different coal-fired power plants. In fact, the effects of these releases
on the environment due to ground deposition have been received some attention but
the results from these studies are not unanimous and cannot be understood as a
generic conclusion for all coal-fired power plants.
In this study, the dispersion modelling of natural radionuclides was carried out to
assess the impact of continuous atmospheric releases from a selected coal plant.
The natural radioactivity of the coal and the fly ash were measured and the
dispersion was modelled by a Gaussian plume estimating the activity concentration
at different heights up to a distance of 20 km in several wind directions.
External and internal doses (inhalation and ingestion) and the resulting risk were
calculated for the population living within 20 km from the coal plant. In average, the
effective dose is lower than the ICRP’s limit and the risk is lower than the U.S. EPA’s
limit. Therefore, in this situation, the considered exposure does not pose any risk.
However, when considering the dispersion in the prevailing wind direction, these
values are significant due to an increase of 232Th and 226Ra concentrations in 75%
and 44%, respectively
Hemodynamics of the corpus luteum in mares during experimentally impaired luteogenesis and partial luteolysis
© 2017 The aim of the current project was to characterize the luteal vascularity and the plasma concentrations of progesterone (P4), prolactin (PRL) and 13,14-dihydro-15-keto-PGF2α (PGFM) in mares with luteal disturbances during early and mid-diestrus. In Experiment 1, twenty-one mares were treated with 2 mL of 0.9% NaCl, or 1 mg Dinoprost, or 10 mg Dinoprost on day two after ovulation (Control-D2, 1/10PGF-D2 and PGF-D2 groups, respectively; n = 7 mares/group). In Experiment 2, similar treatments were performed eight days post-ovulation using a different cohort of 21 mares (Control-D8, 1/10PGF-D8 and PGF-D8 groups, respectively; n = 7 mares/group). Blood samples were collected hourly and power-Doppler examinations of the corpus luteum (CL) were performed every 6 h from H0 (moment immediately before treatment) to H48. Data collection was also done once a day from D0 (day of ovulation) to D20. In Experiment 1, the PGF-D2 and 1/10PGF-D2 groups had lower increase of plasma concentration of P4 until H48 and reduced maximum P4 concentrations on D8-D11 than mares from the Control-D2 group. However, no differences among groups were detected for luteal vascularity during early and mid-diestrus. In Experiment 2, complete and partial luteolysis were detected in mares from the PGF-D8 and 1/10PGF-D8 groups, respectively. Luteal vascularity and plasma P4 concentrations differed among Control-D8, PGF-D8 and 1/10PGF-D8 groups on H48. Partially regressed CLs (1/10PGF-D8 group) generated more Doppler signals than completed regressed CLs (PGF-D8 group) between D10 and D13. In both experiments, a transient increase in PRL activity was observed in parallel to the PGFM pulse in mares receiving 1 or 10 mg Dinoprost. The use of prostaglandin on D2 at conventional or 1/10 of the dose impaired the luteal development in mares. Moreover, the low dose of prostaglandin lead to partial regression of mature CLs. The blood supply was reduced in partially regressed CLs, but not in CLs undergoing impaired luteogenesis
Reconfiguration and regulation of supply chains and HRM in times of economic crisis
This chapter reviews existing evidence on the reconfiguration and regulation of supply chains and employment relations during times of economic crisis. On the one hand, literature has highlighted pressures towards a degradation of standards as firms seek short-term cost advantages. This view is informed by various perspectives from organization studies to political economy but is united by the idea that structural changes in global capitalism drive how firms relate to their suppliers. On the other hand, it has been argued that counter-pressures range from consumer backlashes to the extension of formal and informal regulation across national boundaries. This undeniably heterogeneous literature has common themes suggesting that global forces may be mediated by existing embedded institutional arrangements at transnational, national and local level, and that there are still open-ended possibilities for social action. This chapter synthesizes and evaluates these two streams and identifies agendas for future research
Radioactivity levels of 238U and 232Th decay series and related dose rates in the surroundings of a coal power plant using high resolution g-spectrometry
Gamma radiations measurements were carried out in the vicinity of a coal-fired power plant located in the southwest coastline of Portugal. Two different gamma detectors were used to assess the environmental radiation within a circular area of 20 km centred in the coal plant: a scintillometer (SPP2 NF, Saphymo) and a high purity germanium detector (HPGe, Canberra). Fifty urban and suburban measurements locations were established within the defined area and two measurements campaigns were carried out. The results of the total gamma radiation ranged from 20.83 to 98.33 counts per second (c.p.s.) for both measurement campaigns and outdoor doses rates ranged from 77.65 to 366.51 Gy/h. Natural emitting nuclides from the U-238 and Th-232 decay series were identified as well as the natural emitting nuclide K-40. The radionuclide concentration from the uranium and thorium series determined by gamma spectrometry ranged from 0.93 to 73.68 Bq/kg, while for K-40 the concentration ranged from 84.14 to 904.38 Bq/kg. The obtained results were used primarily to define the variability in measured environmental radiation and to determine the coal plant’s influence in the measured radiation levels. The highest values were measured at two locations near the power plant and at locations between the distance of 6 and 20 km away from the stacks, mainly in the prevailing wind direction. The results showed an increase or at least an influence from the coal-fired plant operations, both qualitatively and quantitatively
New recycling approaches for thermoset polymeric composite wastes – an experimental study on polyester based concrete materials filled with fibre reinforced plastic recyclates
In this study, a new waste management solution for thermoset glass fibre reinforced
polymer (GFRP) based products was assessed. Mechanical recycling approach, with
reduction of GFRP waste to powdered and fibrous materials was applied, and the
prospective added-value of obtained recyclates was experimentally investigated as raw
material for polyester based mortars. Different GFRP waste admixed mortar formulations
were analyzed varying the content, between 4% up to 12% in weight, of GFRP powder
and fibre mix waste. The effect of incorporation of a silane coupling agent was also
assessed. Design of experiments and data treatment was accomplished through
implementation of full factorial design and analysis of variance ANOVA. Added value of
potential recycling solution was assessed by means of flexural and compressive loading
capacity of GFRP waste admixed mortars with regard to unmodified polymer mortars.
The key findings of this study showed a viable technological option for improving the
quality of polyester based mortars and highlight a potential cost-effective waste
management solution for thermoset composite materials in the production of sustainable
concrete-polymer based products
An integrated recycling approach for GFRP pultrusion wastes: recycling and reuse assessment into new composite materials using Fuzzy Boolean Nets
In this study, efforts were made in order to put forward an integrated recycling approach for the thermoset based glass fibre reinforced polymer (GPRP) rejects derived from the pultrusion manufacturing industry. Both the recycling process and the development of a new cost-effective end-use application for the recyclates were considered. For this purpose, i) among the several available recycling techniques for thermoset based composite materials, the most suitable one for the envisaged application was selected (mechanical recycling); and ii) an experimental work was carried out in order to assess the added-value of the obtained recyclates as aggregates and reinforcement replacements into concrete-polymer composite materials. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified concrete-polymer composites with regard to unmodified materials. In the mix design process of the new GFRP waste based composite material, the recyclate content and size grade, and the effect of the incorporation of an adhesion promoter were considered as material factors and systematically tested between reasonable ranges. The optimization process of the modified formulations was supported by the Fuzzy Boolean Nets methodology, which allowed finding the best balance between material parameters that maximizes both flexural and compressive strengths of final composite.
Comparing to related end-use applications of GFRP wastes in cementitious based concrete materials, the proposed solution overcome some of the problems found, namely the possible incompatibilities arisen from alkalis-silica reaction and the decrease in the mechanical properties due to high water-cement ratio required to achieve the desirable workability.
Obtained results were very promising towards a global cost-effective waste management solution for GFRP industrial wastes and end-of-life products that will lead to a more sustainable composite materials industry
- …