EDGE: A new approach to suppressing numerical diffusion in adaptive mesh simulations of galaxy formation

We introduce a new method to mitigate numerical diffusion in adaptive mesh refinement (AMR) simulations of cosmological galaxy formation, and study its impact on a simulated dwarf galaxy as part of the ‘EDGE’ project. The target galaxy has a maximum circular velocity of 21 km s−1 but evolves in a region that is moving at up to 90 km s−1 relative to the hydrodynamic grid. In the absence of any mitigation, diffusion softens the filaments feeding our galaxy. As a result, gas is unphysically held in the circumgalactic medium around the galaxy for 320 Myr, delaying the onset of star formation until cooling and collapse eventually triggers an initial starburst at z = 9. Using genetic modification, we produce ‘velocity-zeroed’ initial conditions in which the grid-relative streaming is strongly suppressed; by design, the change does not significantly modify the large-scale structure or dark matter accretion history. The resulting simulation recovers a more physical, gradual onset of star formation starting at z = 17. While the final stellar masses are nearly consistent (4.8 × 106 M and 4.4 × 106 M for unmodified and velocity-zeroed, respectively), the dynamical and morphological structure of the z = 0 dwarf galaxies are markedly different due to the contrasting histories. Our approach to diffusion suppression is suitable for any AMR zoom cosmological galaxy formation simulations, and is especially recommended for those of small galaxies at high redshif

Mineral maturity and crystallinity index are distinct characteristics of bone mineral

The purpose of this study was to test the hypothesis that mineral maturity and crystallinity index are two different characteristics of bone mineral. To this end, Fourier transform infrared microspectroscopy (FTIRM) was used. To test our hypothesis, synthetic apatites and human bone samples were used for the validation of the two parameters using FTIRM. Iliac crest samples from seven human controls and two with skeletal fluorosis were analyzed at the bone structural unit (BSU) level by FTIRM on sections 2–4 lm thick. Mineral maturity and crystallinity index were highly correlated in synthetic apatites but poorly correlated in normal human bone. In skeletal fluorosis, crystallinity index was increased and maturity decreased, supporting the fact of separate measurement of these two parameters. Moreover, results obtained in fluorosis suggested that mineral characteristics can be modified independently of bone remodeling. In conclusion, mineral maturity and crystallinity index are two different parameters measured separately by FTIRM and offering new perspectives to assess bone mineral traits in osteoporosis

Molecular characterization of a human G20P[28] rotavirus a strain with multiple genes related to bat rotaviruses

Group A rotaviruses are the major cause of severe gastroenteritis in the young of mammals and birds. This report describes characterization of an unusual G20P[28] rotavirus strain detected in a 24 month old child from Suriname. Genomic sequence analyses revealed that the genotype constellation of the Suriname strain RVA/Human-wt/SUR/2014735512/2013/G20P[28] was G20-P[28]-I13-R13-C13-M12-A23-N13-T15-E20-H15. Genes VP1, VP2, VP3, NSP1, NSP2, NSP3, NSP4 and NSP5 were recently assigned novel genotypes by the Rotavirus Classification Working Group (RCWG). Three of the 11 gene segments (VP7, VP4, VP6) were similar to cognate gene sequences of bat-like human rotavirus strain Ecu534 from Ecuador and the VP7, NSP3 and NSP5 gene segments of strain RVA/Human-wt/SUR/2014735512/2013/G20P[28] were found to be closely related to gene sequences of bat rotavirus strain 3081/BRA detected in Brazil. Although distantly related, the VP1 gene of the study strain and bat strain BatLi09 detected in Cameroon in 2014 are monophyletic. The NSP1 gene was found to be most closely related to human strain QUI-35-F5 from Brazil. These findings suggest that strain RVA/Human-wt/SUR/2014735512/2013/G20P[28] represents a zoonotic infection from a bat host

Unusual Case of Pump Thrombosis in LVAD Patient with COVID-19 — Diagnostic Challenges

We present the first reported case of left ventricular assist device (LVAD) pump thrombosis in the setting of the coronavirus pandemic. We describe the clinical features of the case which helped to differentiate coronavirus disease 19 (COVID-19) from LVAD pump thrombosis. The patient is 56-year-old female supported by destination LVAD therapy. She was originally implanted with a HeartMate II device in 2015 and underwent two pump exchanges in 2017 and 2019 for pump thrombosis, despite medication adherence. Shortly after routine lab work revealed near doubling of her lactate dehydrogenase (LDH) levels, she tested positive for COVID-19. She then developed power spikes and symptomatic heart failure, which prompted hospital admission. An initial computed tomography (CT) scan showed bilateral ground glass opacities, but repeat testing was negative for COVID-19. Her LVAD pump thrombosis was treated with aspirin, unfractionated heparin, and cangrelor, which was guided by thromboelastogram. Over several weeks, her LDH returned to baseline, and she was transitioned from cangrelor to ticagrelor and from heparin to warfarin. A repeat CT scan after several days of IV diuresis showed resolution of the ground glass opacities

A comparison of the physical and chemical differences between cancellous and cortical bovine bone mineral at two ages

To assess possible differences between the mineral phases of cortical and cancellous bone, the structure and composition of isolated bovine mineral crystals from young (1–3 months) and old (4–5 years) postnatal bovine animals were analyzed by a variety of complementary techniques: chemical analyses, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and 31P solid-state magic angle spinning nuclear magnetic resonance spectroscopy (NMR). This combination of methods represents the most complete physicochemical characterization of cancellous and cortical bone mineral completed thus far. Spectra obtained from XRD, FTIR, and 31P NMR all confirmed that the mineral was calcium phosphate in the form of carbonated apatite; however, a crystal maturation process was evident between the young and old and between cancellous and cortical mineral crystals. Two-way analyses of variance showed larger increases of crystal size and Ca/P ratio for the cortical vs. cancellous bone of 1–3 month than the 4–5 year animals. The Ca/(P + CO3) remained nearly constant within a given bone type and in both bone types at 4–5 years. The carbonate and phosphate FTIR band ratios revealed a decrease of labile ions with age and in cortical, relative to cancellous, bone. Overall, the same aging or maturation trends were observed for young vs. old and cancellous vs. cortical. Based on the larger proportion of newly formed bone in cancellous bone relative to cortical bone, the major differences between the cancellous and cortical mineral crystals must be ascribed to differences in average age of the crystals

Pilot Study of a Novel Computerized Task to Assess Spatial Learning in Children and Adolescents With Neurofibromatosis Type 1

Abstract Difficulties with visual-spatial learning are frequently observed and often considered to be the hallmark of neurocognitive impairment in neurofibromatosis type 1. The computerized Arena Maze is a virtual environment task that has been developed as a human paradigm to the Morris Water Maze, which is used to evaluate spatial learning in animal models. The authors evaluated this task as a measure of spatial learning in children with neurofibromatosis type 1 compared with their unaffected siblings. Affected children were able to learn the task and navigate the virtual environment; however, they performed more poorly on standard measures of spatial learning and spatial working memory than their siblings. The group with neurofibromatosis type 1 demonstrated decreased proficiency in earlier target trials and had more difficulty in remembering target location. This study demonstrates the potential utility of a novel virtual task to assess spatial learning deficits in children with neurofibromatosis type 1

Simulating the annual energy yield of a rotationally asymmetrical optical concentrator.

This paper simulates the annual energy yield of a concentrator called the rotationally asymmetrical dielectric totally internally reflective concentrator (RADTIRC). One specific design of the RADTIRC is assumed to be installed in Berlin/Brandenburg, Germany. Simulation and experimental work have been carried out to determine the optical concentration gain under direct and diffuse radiations. Based on the analysis, it was found that the yearly energy yield was increased by a factor of 2.29 when the RADTIRC-PV module was used when compared with the non-concentrating PV module

Effects of Stearic Acid on Tensile, Morphological and Thermal Analysis of Polypropylene (PP)/Dolomite (Dol) Composites

The effects of stearic acid treated dolomite (Sa-Dol) on the mechanical, morphological and thermal properties of polypropylene (PP) composite were studied. Prior treatment, raw dolomite was ground in planetary mill using different grinding time to obtain the submicron size (under 10µm). Particle size and specific surface area of dolomite was analyzed and validated using particle size analyzer (Malvern Mastersizer) and BrunauerEmmett-Teller (BET) method respectively. Dolomite with five filler loadings (5, 10, 15, 20 & 25%) were mixed with PP thermoplastic and were compounded using hot melt blending method. Fourier Transform Infrared (FTIR) spectroscopy confirms the successful of filler treatment using stearic acid according to the new peak at 2917 cm --1 attributed to the alkyl group that represented the addition of C-H bond. Tensile properties indicated that tensile strength of PP/Dol decreased with the increasing of filler loading for both systems. The elongation at break decreased with filler loading and showed better and improved result after treatment with stearic acid. The incorporation of stearic acid coated filler into PP matrix enhanced the break elongation of the composites that makes the composites more ductile. Morphological analysis using Scanning Electron Microscopy (SEM) proved better interfacial adhesion and less agglomeration of dolomite filler after treatment with stearic acid at low filler loading (5 wt.%)

Determinant Factors of Electricity Consumption for a Malaysian Household Based on a Field Survey

Electricity-saving strategies are an essential solution to overcoming increasing global CO2 emission and electricity consumption problems; therefore, the determinant factors of electricity consumption in households need to be assessed. Most previous studies were conducted in developed countries of subtropical regions that had different household characteristic factors from those in developing countries of tropical regions. A field survey was conducted on electricity consumption for Malaysian households to investigate the factors affecting electricity consumption that focused on technology perspective (building and appliance characteristics) and socioeconomic perspective (socio-demographics and occupant behaviour). To analyse the determinant factors of electricity consumption, direct and indirect questionnaire surveys were conducted from November 2017 to January 2018 among 214 university students. Direct questionnaire surveys were performed in order to obtain general information that is easily answered by respondents. On the other hand, some questions such as electricity consumption and detailed information of appliances must be confirmed by the respondents' parents or other household members through an indirect questionnaire survey. The results from multiple linear regression analyses of the survey responses showed that appliance characteristic factors were the main variables influencing electricity consumption and house characteristics were the least significant. Specifically, air conditioners, fluorescent lamps, and flat-screen TVs emerged as appliances with the most significant effect on electricity consumption. Occupant behaviour factors had a more significant influence than socio-demographic factors. The findings in this study can be used by policymakers to develop electricity-saving strategies in Malaysia