Synthesis and Structure of 1,2-Dimethylene[2.10]metacyclophane and Its Conversion into Chiral [10]Benzenometacyclophanes: Synthesis and Structure of 1,2-Dimethylene[2.10]metacyclophane and Its Conversion into Chiral [10]Benzenometacyclophanes

Bromination of 5,21-di-tert-butyl-8,24-dimethoxy-1,2-dimethyl[2.10]metacyclophan-1-ene (MCP-1-ene; 1) with benzyltrimethylammonium tribromide exclusively afforded 1,2-bis(bromomethyl)-5,21-di-tert-butyl-8,24-dimethoxy[2.10]MCP-1-ene (2). Debromination of 2 with Zn and AcOH in CH₂Cl solution at room temperature for 24 h produced dimethylene[2.10]MCP 7 in 92 % yield, which is a stable solid compound. Compound 7 was treated with dimethyl acetylenedicarboxylate (DMAD) to provide 1,2-(3′,6′-dihydrobenzo)-5,21-di-tert-butyl-8,24-dimethoxy[2.10]MCP-4′,5′-dimethylcarboxylate (8) in good yield. Diels–Alder adduct 8 was converted into a novel and inherently chiral areno-bridged dimethoxy[2.10]MCP-4′,5′-dimethylcarboxylate 9, possessing C₁ symmetry, by aromatization with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). A new type of N-phenyl-maleimide substituted 1,2-(3′,6′-dihydrobenzo)-5,21-di-tert-butyl-8,24-dimethoxy[2.10]MCP-4′,5′-N-phenylmaleimide 10 was also synthesized from 7 through treatment with N-phenylmaleimide in toluene at 110 °C followed by aromatization with DDQ. Single-crystal X-ray analysis of 9 revealed the formation of a syn-isomer

Synthesis and conformational studies of chiral macrocyclic [1.1.1]metacyclophanes containing benzofuran rings

Macrocyclic [1.1.1]metacyclophanes (MCPs) containing benzene and benzofuran rings linked by methylene bridges and which can be viewed as calixarene analogues, have been synthesized by demethylation of [3.3.1]MCP-diones with trimethylsilyl iodide (TMSI) in MeCN. The [3.3.1]MCP-diones are synthesized by using (p-tolylsulfonyl)methyl isocyanide (TosMIC) as the cyclization reagent in N,N-dimethylformamide (DMF) with an excess of sodium hydride. ¹H NMR spectroscopy revealed that the remaining hydroxyl group on the phenyl ring is involved in intramolecular hydrogen bonding with the oxygen of one of the benzofuran rings. O-Methylation at the lower rim of monohydroxy[1.1.1]MCP in the presence of K₂CO₃ in acetone afforded a novel and inherently chiral calixarene analogue, namely the macrocyclic [1.1.1]MCP, possessing C₁ symmetry. The inherent chirality of the two conformers was characterized by ¹H NMR spectroscopy by addition of an excess of Pirkle's chiral shift reagent, which caused a splitting of the corresponding methylene protons to AB patterns. Single crystal X-ray analysis revealed the adoptation of a hemisphere-shaped cone isomer. DFT calculations were carried out to investigate the energy-minimized structures and the hydrogen bonds of the synthesized MCPs

Synthesis and conformations of [2.n]metacyclophan-1-ene epoxides and their conversion to [n.1]metacyclophanes

A series of syn- and anti-[2.n]metacyclophan-1-enes have been prepared in good yields by McMurry cyclizations of 1,n-bis(5-tert-butyl-3-formyl-2-methoxyphenyl)alkanes. Significantly, acid catalyzed rearrangements of [2.n]metacyclophan-1-enes afforded [n.1]metacyclophanes in good yield. The ratios of the products are strongly regulated by the number of methylene bridges present. The percentages of the rearrangement products increase with increasing length of the carbon bridges. Characterization and the conformational studies of these products are described. Single crystal X-ray analysis revealed the adoption of syn- and anti-conformations. DFT calculations were carried out to estimate the energy-minimized structures of the synthesized metacyclophanes

Synthesis, structures and conformational studies of 1,2-dimethyl[2.10]metacyclophane-1-enes

A series of 1,2-dimethyl[2.10]metacyclophan-1-enes (MCP-1-enes) containing different substituent groups has been synthesized to illustrate their conformational behavior. 4,22-dimethoxy-1,2-dimethyl[2.10]MCP-1-ene 3 was synthesized by a Grignard coupling reaction, Friedel-Crafts acylation reactions and McMurry coupling reaction from 1,10-dibromodecane. The formation of 4,22-dihydroxy-1,2-dimethyl[2.10]MCP-1-ene 4 was carried out by demethylation of compound 3 with boron tribromide at room temperature. The syn type conformation of 4 was characterized by X-ray diffraction and was found to form both intramolecular and intermolecular hydrogen bonds between the two hydroxyl groups. From this reaction an interesting compound [10]tetrahydrobenzofuranophane 5 was afforded on prolonging the reaction time. 5,21-diformyl-4,22-dihydroxy-1,2-dimethyl[2.10]MCP-1-ene 6 has been prepared from 4,22-dihydroxy-1,2-dimethyl[2.10]MCP-1-ene 4 by using the Duff method in the presence of hexamethylenetetramine. Structural analysis by 1H NMR spectroscopy and X-ray diffraction confirmed that both the solution and the crystalline state of compound 6 adopts an anti-conformation which forms an intramolecular hydrogen bond between the formyl group and the hydroxyl group, which is an interesting finding for long carbon chain MCP compounds

Demethylation of 5,n-di-tert-butyl-8,n-dimethoxy[2.n] metacyclophane-1-ynes with BBr3 to afford novel [n] benzofuranophanes

© 2016 Elsevier B.V. All rights reserved. Novel [n]benzofuranophanes (n = 8 & 10) 2a-b have been prepared by successive intramolecular cyclization from 5,19-di-tert-butyl-8,22-dimethoxy[n]metacyclophane-1-yne (syn-1a-b) by treatment with BBr 3 in CH 2 Cl 2 at room temperature for 8h. [2.n]Benzofuranophanes 2a-b were also obtained by treatment of 1,2-di-endo-bromo-5,19-di-tert-butyl-8,22-dimethoxy[n] metacyclophane (meso-3a-b) with BBr 3 in CH 2 Cl 2 by using the same reaction conditions. 1 H NMR spectra of 2a-b reveals the formation of intramolecular hydrogen bonding between hydroxyl proton with the oxygen of the furan moiety and X-ray analysis shows that the lengths between H (OH) and O (furan) are 1.981 and 1.823 Å, respectively. The conformation of [8]benzofuranophane 2a in solution is rigid with restricted rotation around the diaryl linkage rather than [10] benzofuranophane 2b because of weak intramolecular hydrogen bonding and the short length of the cross-linking chain

Numerical Simulation of the Solid Particle Sedimentation and Bed Formation Behaviors Using a Hybrid Method

In the safety analysis of sodium-cooled fast reactors, numerical simulations of various thermal-hydraulic phenomena with multicomponent and multiphase flows in core disruptive accidents (CDAs) are regarded as particularly difficult. In the material relocation phase of CDAs, core debris settle down on a core support structure and/or an in-vessel retention device and form a debris bed. The bed’s shape is crucial for the subsequent relocation of the molten core and heat removal capability as well as re-criticality. In this study, a hybrid numerical simulation method, coupling the multi-fluid model of the three-dimensional fast reactor safety analysis code SIMMER-IV with the discrete element method (DEM), was applied to analyze the sedimentation and bed formation behaviors of core debris. Three-dimensional simulations were performed and compared with results obtained in a series of particle sedimentation experiments. The present simulation predicts the sedimentation behavior of mixed particles with different properties as well as homogeneous particles. The simulation results on bed shapes and particle distribution in the bed agree well with experimental measurements. They demonstrate the practicality of the present hybrid method to solid particle sedimentation and bed formation behaviors of mixed as well as homogeneous particles

Synthesis, structures and Lewis‐Acid‐Induced isomerization of 8‐Methoxy[2.2]metaparacyclophanes and a DFT study

Methyl substituted 8‐methoxy[2.2]MPCPs 8 a–b were obtained via thiacyclophane and its oxidized products. Lewis acid‐catalyzed (AlCl3‐MeNO2) reactions of 5‐tert‐butyl‐8‐methoxy‐12,13,15,16‐tetramethyl[2.2]MPCP 8 b under various conditions led to transannular cyclization and isomerization reactions, affording the considerably less‐strained 5‐tert‐butyl‐8‐methoxy[2.2]MPCP 9, 5‐tert‐butyl‐8‐hydroxy‐14,16,17,18‐tetramethyl[2.2]metacyclophane 10 and pyrene derivatives 11 and 12. However,on prolonging the reaction time to 3 h for 8 b, the major product is 5‐tert‐butyl‐8‐hydroxy[2.2]MPCP 10. These reactions are strongly affected by the size and properties of the C‐8 substitutents as well as the methyl substitutents on the para‐linked benzene rings, which increase the strain in the molecules. The 1H NMR spectra and X‐ray crystallographic analysis of 8 b revealed that it adopts a syn‐conformation both in solution and in the solid state

Recognizing Emotions in a Foreign Language

Expressions of basic emotions (joy, sadness, anger, fear, disgust) can be recognized pan-culturally from the face and it is assumed that these emotions can be recognized from a speaker's voice, regardless of an individual's culture or linguistic ability. Here, we compared how monolingual speakers of Argentine Spanish recognize basic emotions from pseudo-utterances ("nonsense speech") produced in their native language and in three foreign languages (English, German, Arabic). Results indicated that vocal expressions of basic emotions could be decoded in each language condition at accuracy levels exceeding chance, although Spanish listeners performed significantly better overall in their native language ("in-group advantage"). Our findings argue that the ability to understand vocally-expressed emotions in speech is partly independent of linguistic ability and involves universal principles, although this ability is also shaped by linguistic and cultural variables

Synthesis and conformational studies of calixarene analogue chiral [3.3.1]metacyclophanes

Trihydroxy[3.3.1]metacyclophane, which can be regarded as an unsymmetrical or incomplete “homocalix[3]arene”, has been prepared from trimethoxy[3.3.1]metacyclophane by demethylation with trimethylsilyl iodide in MeCN. Di-O-methylation at the lower rim of trihydroxy[3.3.1]metacyclophane in the presence of K₂CO₃ in acetone afforded a novel, inherently chiral calixarene–analogue, namely a macrocyclic [3.3.1]metacyclophane, possessing C₁ symmetry. The inherent chirality of the two conformers was characterized by ¹H NMR spectroscopy by addition of an excess of Pirkle's chiral shift reagent [(S)-(+)-1-(9-anthryl)-2,2,2-trifluoroethanol], which caused a splitting of the OMe group and AB patterns corresponding to the methylene protons

Studies on Lewis-Acid Induced Reactions of 8-Methoxy[2.2]metacyclophanes: A New Synthetic Route to Alkylated Pyrenes

Anti-8-methoxy[2.2]metacyclophanes (MCPs) 5 a–b were obtained via pyrolysis of the corresponding syn-thiatetraoxide cyclophanes 4 a–b. Coupling reactions of 4-tert-butyl-1-methoxy-2,6-bis(mercaptomethyl)benzenes 1 a–b and 1,5-bis(chloro-methyl)-2,4-dimethylbenzene 2 under high dilution conditions afforded only the syn-conformers of 9-methoxy-2,11-dithia[3.3]metacyclophanes 3 a–b, which with m-CPBA formed the corresponding syn-tetraoxides 4 a–b. Lewis acid (TICl4/AlCl3-MeNO2) or iodine-catalyzed reactions of 5 b under various conditions led to transannular cyclization to afford tetrahydropyrene 6 b and pyrene derivative 7 b and/or de-tert-butylated 6 a. Iodine-catalyzed reaction of 5 a afforded tetrahydropyrene 6 a. These findings suggest the potential for a new route to alkylated pyrenes via strained and alkylated metacyclophanes. Density functional theory (DFT) studies were carried out to investigate the conformational characteristics of 3–5