264 research outputs found
Application of a stochastic snowmelt model for probabilistic decisionmaking
A stochastic form of the snowmelt runoff model that can be used for probabilistic decision-making was developed. The use of probabilistic streamflow predictions instead of single valued deterministic predictions leads to greater accuracy in decisions. While the accuracy of the output function is important in decisionmaking, it is also important to understand the relative importance of the coefficients. Therefore, a sensitivity analysis was made for each of the coefficients
Relationship of physiography and snow area to stream discharge
The author has identified the following significant results. A comparison of snowmelt runoff models shows that the accuracy of the Tangborn model and regression models is greater if the test data falls within the range of calibration than if the test data lies outside the range of calibration data. The regression models are significantly more accurate for forecasts of 60 days or more than for shorter prediction periods. The Tangborn model is more accurate for forecasts of 90 days or more than for shorter prediction periods. The Martinec model is more accurate for forecasts of one or two days than for periods of 3,5,10, or 15 days. Accuracy of the long-term models seems to be independent of forecast data. The sufficiency of the calibration data base is a function not only of the number of years of record but also of the accuracy with which the calibration years represent the total population of data years. Twelve years appears to be a sufficient length of record for each of the models considered, as long as the twelve years are representative of the population
Recommended from our members
Complex Index of Refraction of Multi-walled Carbon Nanotubes in Strong Terahertz Fields
Carbon nanotubes are the subject of intense interest in virtually every field, from medicine to
nano-scale electrical components. Multi-walled nanotubes exhibit a strong nonlinear response
to high-field strength terahertz radiation. This research uses terahertz pulses with field strength
exceeding 1 MV/cm generated by means of optical rectification utilizing a lithium niobate prism
to determine the complex refractive index of free standing highly aligned multi-walled carbon
nanotubes wound around a polyethylene reel. Computational techniques are used to determine
the index of refraction and extinction coefficient simultaneously as a function of frequency
Recommended from our members
Complex index of refraction of multi-walled carbon nanotubesin strong terahertz fields
Carbon nanotubes are the subject of intense interest in virtually every field, from medicine to nano-scale electrical components. Multi-walled nanotubes exhibit a strong nonlinear response to high-field strength terahertz radiation. This research uses terahertz pulses with field strength exceeding 1 MV/cm generated by means of optical rectification utilizing a lithium niobate prism to determine the complex refractive index of free standing highly aligned multi-walled carbon nanotubes wound around a polyethylene reel. Computational techniques are used to determine the index of refraction and extinction coefficient simultaneously as a function of frequency
BIM adoption within Australian small and medium-sized enterprises (SMEs) : an innovation diffusion model
Despite the envisaged benefits of BIM adoption for SMEs, BIM in SMEs has remained an underrepresented area within the available academic literature. This study proposes and draws upon a framework grounded on innovation diffusion theory (IDT) to provide an illuminating insight into the current state of BIM and the main barriers to BIM adoption within Australian SMEs. Based on analyses of 135 questionnaires completed by SMEs through partial least squares structural equation modelling (PLS-SEM) and grounded on the proposed framework, the current state of BIM adoption and barriers to BIM adoption for SMEs are discussed. The findings show that currently around 42% of Australian SMEs use BIM in Level 1 and Level 2 with only around 5% have tried Level 3. It comes to light that lack of knowledge within SMEs and across the construction supply chain is not a major barrier for Australian SMEs. In essence, the main barriers stem from the risks associated with an uncertain return on investment (ROI) for BIM as perceived by key players in SMEs. The findings also show the validity of the framework proposed for explaining BIM adoption in Australian SMEs
Recommended from our members
Design of low impact development in the urban context considering hydrological performance and life-cycle cost
The pressures on water system are increasing in cities. Rapid urbanisation caused by booming population leads to more impervious area and less infiltration, with the consequence of larger runoff volume and higher flood risk. Launched in 2014, the low impact development (LID), an important part of Sponge City in China initiative, invests in projects that aim to restore the water cycle in the urban area. A comprehensive understanding of the performance of LID measures at watershed scale under different rainfall scenarios and life cycle costs is necessary. The objectives of this study are to assess the hydrological performance and to identify the optimal LID design by using SWMM model and life cycle cost (LCC) method. This study found that LID practices, including bioretention, grass swale, and permeable pavement, showed good performance on urban storm mitigation at watershed scale under different rainfall scenarios. Furthermore, the rates of surface runoff reduction were largely insusceptible to the change of rainfall volume and duration. Regarding the cost-effectiveness, the priority was grass swale > bioretention > permeable pavement in the study area. The optimal LID scenario was the combination of these three types of LID. The proposed approach can help the decision-makers to determine the preferable LID plan suitable for the local communities
Improving the effectiveness of multi-objective optimization design of urban drainage systems
This is the final version. Available from Wiley via the DOI in this recordCapacity of urban drainage systems (UDSs) can substantially influence flooding
properties of urban catchments. This motivates many studies to optimally design UDSs often
using multi-objective evolutionary algorithms (MOEAs) as they can explore trade-offs between
conflicting objectives (e.g., cost versus system reliability). However, MOEA-based approaches
are typically computationally demanding and their solutions are often practically unacceptable as
engineering domain knowledge is often not explicitly considered. To address these two issues,
this paper proposes an efficient optimization framework for UDS design, where an engineering23 based design method (EBDM) is developed to generate approximate solutions to initialize the
MOEA’s search, thereby greatly enhancing the optimization efficiency. To improve the solution
practicality, two ideas have been implemented in the proposed optimization method (PM): (i) the
variability of peak depths across pipes is minimized, and (ii) a constraint is introduced to ensure
that sizes of pipes in the downstream direction are no smaller than their corresponding upstream
diameters. Two real-world UDSs of different size are used to demonstrate the effectiveness of
the PM. Results show that: (i) the proposed EBDM is effective in producing initial solutions that
are very close to the final solutions identified by the optimization methods, (ii) the minimization
of the variability of peak depths in pipes is practically meaningful as it can facilitate to identify
solutions with great ability in handling future uncertainties (e.g., rainfall variability), and (iii) the
PM significantly improves optimization efficiency and solution practicality compared to the
traditional optimization approach, with benefits being more prominent for larger UDSs.National Natural Science Foundation of ChinaExcellent Youth Natural Science Foundation of Zhejiang Province, Chin
Assessment the flood hazard arising from land use change in a forested catchment in northern Iran
The provinces of northern Iran that border the Caspian Sea are forested and may be prone to increased risks of flooding due to deforestation and other land use changes, in addition to climate change effects. This research investigated changes in runoff from a small forested catchment in northern Iran for several land use change scenarios and the effects of higher rainfall and high antecedent soil moisture. Peak discharges and total runoff volumes from the catchment were estimated using the US Soil Conservation Service 'Curve Number' (SCS-CN) method and the SCS dimensionless unit hydrograph. This method was selected for reasons of data availability and operational simplicity for flood managers. A GIS was used to manipulate spatial data for use in the catchment runoff modelling. The results show that runoff is predicted to increase as a result of deforestation, which is dependent on the proportion of the catchment area affected. However, climate change presents a significant flood hazard even in the absence of deforestation. Other land use changes may reduce the peak discharges of all return period floods. Therefore a future ban on timber extraction, combined with agricultural utilisation of rangeland, could prove effective as 'nature-based' flood reduction measures throughout northern Iran
- …