Inactivation of Campylobacter jejuni by exposure to high-intensity 405-nm visible light

Although considerable research has been carried out on a range of environmental factors that impact on the survival of Campylobacter jejuni, there is limited information on the effects of violet/blue light on this pathogen. This investigation was carried out to determine the effects of high-intensity 405-nm light on C. jejuni and to compare this with the effects on two other important Gram-negative enteric pathogens, Salmonella enteritidis and Escherichia coli O157:H7. High-intensity 405-nm light generated from an array of 405-nm light-emitting diodes was used to inactivate the test bacteria. The results demonstrated that while all three tested species were susceptible to 405-nm light inactivation, C. jejuni was by far the most sensitive organism, requiring a total dose of 18J cm−2 of 405-nm light to achieve a 5-log10 reduction. This study has established that C. jejuni is particularly susceptible to violet/blue light at a wavelength of 405nm. This finding, coupled with the safety-in-use advantages of this visible (non-ultraviolet wavelength) light, suggests that high-intensity 405-nm light may have applications for control of C. jejuni contamination levels in situations where this type of illumination can be effectively applied

Effect of HINS light on the contraction of fibroblast populated collagen lattices

High intensity narrow spectrum (HINS) light has been shown to have bactericidal effects on a range of medically important bacteria[1]. HINS technology could potentially be useful as a method for disinfecting medical implants, tissue engineered constructs and wounds. The fibroblast populated collagen lattice (FPCL) was used as an in vitro model to investigate the effect of HINS light on the wound contraction phase of wound healing

Impact of varying intensities of blue-light exposure on 3T3 cells

There is the need to develop a compatible sterilisation method for hybrid biomaterials. High-intensity blue light in the 405 nm region has been shown to be an effective bacterial decontamination method [1], to cause no noticeable damage to the gross structure of type-I collagen monomer (when treated at 10 mW/cm2) [2], and to have no noticeable effect on 3T3 cell viability, growth rate, redox state or lactate dehydrogenase (LDH) leakage (at 1.0 mW/cm2) [2]. The purpose of this research was to investigate the effect of varying the blue-light intensity on the 3T3 cell response parameters

Inactivation of pathogens on food and contact surfaces using ozone as a biocidal agent

This study focuses on the inactivation of a range of food borne pathogens using ozone as a biocidal agent. Experiments were carried out using Campylobacter jejuni, E. coli and Salmonella enteritidis in which population size effects and different treatment temperatures were investigate

Combined treatment of biomatrices with nisin and pulsed electric fields as a potential decontamination method?

Pulsed electric field (PEF) treatment has been shown to achieve bacterial inactivation in collagen gels whilst retaining the ability of the collagen to function as a biomaterial [1, 2]. Nisin, an antimicrobial peptide, has been used widely as a food preservative and has shown bactericidal action against a number of Gram-positive bacteria [3]. The potential of nisin to increase the efficacy of PEF disinfection of collagen gels to be used for tissue engineering applications was investigated

Efficacy of antimicrobial 405 nm blue-light for inactivation of airborne bacteria

Airborne transmission of infectious organisms is a considerable concern within the healthcare environment. A number of novel methods for ‘whole room’ decontamination, including antimicrobial 405 nm blue light, are being developed. To date, research has focused on its effects against surface-deposited contamination; however it is important to also establish its efficacy against airborne bacteria. This study demonstrates evidence of the dose-response kinetics of airborne bacterial contamination when exposed to 405 nm light.Bacterial aerosols of Staphylococcus epidermidis, generated using a 6-Jet Collison nebuliser, were introduced into an aerosol chamber designed to maintain prolonged airborne suspension and circulation. Aerosolized bacteria were exposed to increasing doses of 405 nm light, and air samples were extracted from the chamber using a BioSampler liquid impinger, with viability analysed using pour-plate culture. Initial results have demonstrated successful aerosol inactivation, with a 98.4% reduction achieved with 1-hour exposure to low irradiance (11.9 mWcm-2) 405 nm light (P=<0.001). Natural decay of the suspended aerosol was observed, however this was significantly less than achieved with light treatment (P=0.004). Overall, results have provided early evidence of the susceptibility of bacterial aerosols to 405 nm light. Although less germicidally efficient than UV-light, 405 nm light treatment offers benefits in terms of increased safety for human exposure, and eradication of microbes regardless of antibiotic resistance. Such benefits provide advantages for a number of applications including ‘whole room’ environmental decontamination, in which reducing levels of airborne bacteria should reduce the number of infections arising from airborne contamination

Densitometry and Thermometry of Starburst Galaxies

With a goal toward deriving the physical conditions in external galaxies, we present a survey of formaldehyde (H2CO) and ammonia (NH3) emission and absorption in a sample of starburst galaxies using the Green Bank Telescope. By extending well-established techniques used to derive the spatial density in star formation regions in our own Galaxy, we show how the relative intensity of the 1(10)-1(11) and 2(11)-2(12) K-doublet transitions of H2CO can provide an accurate densitometer for the active star formation environments found in starburst galaxies (c.f. Mangum et al. 2008). Similarly, we employ the well-established technique of using the relative intensities of the (1,1), (2,2), and (4,4) transitions of NH3 to derive the kinetic temperature in starburst galaxies. Our measurements of the kinetic temperature constrained spatial density in our starburst galaxy sample represent the first mean density measurements made toward starburst galaxies. We note a disparity between kinetic temperature measurements derived assuming direct coupling to dust and those derived from our NH3 measurements which points to the absolute need for direct gas kinetic temperature measurements using an appropriate molecular probe. Finally, our spatial density measurements point to a rough constancy to the spatial density (10^{4.5} to 10^{5.5} cm^{-3}) in our starburst galaxy sample. This implies that the Schmidt-Kennicutt relation between L_{IR} and M_{dense}: (1) Is a measure of the dense gas mass reservoir available to form stars, and (2) Is not directly dependent upon a higher average density driving the star formation process in the most luminous starburst galaxies.Comment: 4 pages, to appear in proceedings of The 5th Zermatt ISM Symposiu

Lethal effects of high intensity violet 405-nm light on saccharomyces cerevisiae, candida albicans and on dormant and germinating spores of aspergillus niger

This study assessed the effects of high-intensity violet light on selected yeast and mould fungi. Cell suspensions of Saccharomyces cerevisiae, Candida albicans, and dormant and germinating spores (conidia) of the mould Aspergillus niger were exposed to high-intensity narrow band violet light with peak output at 405 nm generated from a light-emitting diode (LED) array. All three fungal species were inactivated by the 405-nm light without a requirement for addition of exogenous photosensitiser chemicals. Of the fungal species tested, S. cerevisiae was most sensitive and dormant conidia of A. niger were most resistant to 405-nm light exposure. Five-log10 colony forming units per millilitre (CFU ml1) reductions of the tested species required exposure doses of 288 J cm2 for S. cerevisiae, 576 J cm2 for C. albicans, and a much higher value of 2.3 kJ cm2 for dormant conidia of A. niger. During germination, A. niger conidia became more sensitive to 405-nm light exposure and sensitivity increased as germination progressed over an 8 h test period. Light exposure under aerobic and anaerobic conditions, together with results obtained using ascorbic acid as a scavenger of reactive oxygen species, revealed that 405-nm light inactivation in fungi involved an oxygen-dependent mechanism, as previously described in bacteria. The inactivation results achieved with yeast cells and fungal spores together with operational advantages associated with the use of a visible (nonultraviolet (UV)) light source highlight the potential of 405-nm light for fungal decontamination applications

Investigating the susceptibility of laboratory-generated bacterial aerosols to antimicrobial 405 nm light

Airborne transmission of infectious organisms is a major concern within the healthcare environment. A number of methods for 'whole room' decontamination, such as antimicrobial 405nm light, are being developed, and it is important that efficacy against airborne, as well as surface-deposited contamination is established. This study demonstrates evidence of the dose-response kinetics of airborne bacterial contamination when exposed to 405nm light. Aerosols of Staphylococcus epidermids, generated using a 6-Jet Collison nebuliser, were introduced into an aerosol chamber designed to maintain prolonged airborne suspension and circulation. Aerosolized bacteria were exposed to increasing doses of 405nm light, and air samples were extracted from the chamber using a BioSampler liquid impinger, with viability analysed using pour plate culture. Initial results have demonstrated successful aerosol inactivation, with a 98.4% reduction (1.8 log10 reduction) achieved with 1-hour exposure to low irradiance 405nm light (P=<0.001). Natural decay of the suspended aerosol was observed, however this was significantly less than achieved with light treatment (P=0.004). Inactivation using ultraviolet (UV) light was also investigated in order to quantify the comparative efficacy of these antimicrobial light regions.Overall, results have provided early evidence of the susceptibility of bacterial aerosols to antimicrobial 405 nm light. Although less germicidally efficient than UV-light, the benefits of 405 nm light in terms of increased safety for human exposure, provide advantages for a number of applications, including continuous 'whole room' environmental decontamination, where reducing levels of airborne bacteria should contribute to reducing infections arising from airborne contamination

Continuous monitoring of aerial bioburden within intensive care isolation rooms and identification of 'high risk' activities

Background: The spread of pathogens via the airborne route is often underestimated and little is known about the extent to which airborne microbial contamination levels vary throughout the day and night in hospital facilities. Aims: This study aims to evaluate variability in airborne contamination levels within ICU isolation rooms over extended time periods to improve understanding of the extent to which ward activities, and consequential increases in airborne bioburden, may contribute to cross-infection of patients. Methods: Environmental air monitoring was conducted within occupied and vacant inpatient isolation rooms. A sieve impactor sampler was used to collect 500 L air samples every 15 minutes over 10-hour (08:00-18:00 h) and 24-hour (08:00-08:00 h) periods. Samples were collected, room activity logged, and the bacterial contamination levels were recorded as cfu/m3 of air. Findings: A high degree of variability in levels of airborne contamination was observed across all scenarios in the studied isolation rooms. Air bioburden increased as room occupancy increased, with air contamination levels highest in rooms occupied for the longest time during the study (10 days) with a mean value of 104.4 cfu/m3 and a range of 12–510 cfu/m3. Counts were lowest in unoccupied rooms, with an average value of 20 cfu/m3 and during the night. Conclusion: Peaks in airborne contamination showed a direct relation to an increase in activity levels. This study provides first clear evidence of the extent of variability in microbial airborne levels over 24-hour periods in ICU isolation rooms and directly correlates microbial load to ward activity