Search for neutrinoless tau decays tau -> 3l and tau -> l K0S

Neutrinoless tau-lepton decays into either three leptons (tau- -> l1- l2 l3) or one lepton and one K0S meson(tau- -> l- K0S) where lepton l means either an electron or muon, have been searched for using 48.6 fb^{-1} of data collected with the Belle detector at the KEKB e+e- collider. No evidence for candidate decays are found in any channel. Therefore we set 90% confidence level upper limits on the branching fraction for 8 different decay modes. These limits are more stringent than those set previously and reach to the 10^{-7} level.Comment: Invited talk at the Seventh International Workshop on Tau Lepton Physics (TAU02), Santa Cruz, Ca, USA, Sept 2002, 7 pages, LaTeX, 3 eps figure

A geometrical formulation of the μ-lower bound problem

A new problem formulation for the structured singular value μ in the case of purely real (possibly repeated) uncertainties is presented. The approach is based on a geometrical interpretation of the singularity constraint arising in the μ lower bound problem. An interesting feature of this problem formulation is that the resulting parametric search space is independent of the number of times any parameter is repeated in the structured uncertainty matrix. A corresponding lower bound algorithm combining randomisation and optimisation methods is developed, and some probabilistic performance guarantees are derived. The potential usefulness of the proposed approach is demonstrated on two high-order real μ analysis problems from the aerospace and systems biology literature

Model and visualise the relationship between energy consumption and temperature distribution in cold rooms

In the area of food and pharmacy cold storage, temperature distribution is considered as a key factor. Inappropriate distribution of temperature during the cooling process in cold rooms will cause the deterioration of the quality of products and therefore shorten their life-span. In practice, in order to maintain the distribution of temperature at an appropriate level, large amount of electrical energy has to be consumed to cool down the volume of space, based on the reading of a single temperature sensor placed in every cold room. However, it is not clear and visible that what is the change of energy consumption and temperature distribution over time. It lacks of effective tools to visualise such a phenomenon. In this poster, we initially present a solution which combines a visualisation tool with a Computational Fluid Dynamics (CFD) model together to enable users to explore such phenomenon

One-parameter class of uncertainty relations based on entropy power

We use the concept of entropy power to derive a new one-parameter class of information-theoretic uncertainty relations for pairs of conjugate observables in an infinite-dimensional Hilbert space. This class constitutes an infinite tower of higher-order statistics uncertainty relations, which allows one in principle to determine the shape of the underlying information-distribution function by measuring the relevant entropy powers. We illustrate the capability of the new class by discussing two examples: superpositions of vacuum and squeezed states and the Cauchy-type heavy-tailed wave function

Primary and submovement control of aiming in C6 tetraplegics following posterior deltoid transfer

Background: Upper limb motor control in fast, goal-directed aiming is altered in tetraplegics following posterior-deltoid musculotendinous transfer. Specifically, movements have similar end-point accuracy but longer duration and lower peak velocity than those of age-matched, neurotypical controls. Here, we examine in detail the interplay between primary movement and submovement phases in five C6 tetraplegic and five control participants. Methods: Aiming movements were performed in two directions (20 cm away or toward), with or without vision. Trials that contained a submovement phase (i.e., discontinuity in velocity, acceleration or jerk) were identified. Discrete kinematic variables were then extracted on the primary and submovements phases. Results: The presence of submovements did not differ between the tetraplegic (68%) and control (57%) groups, and almost all submovements resulted from acceleration and jerk discontinuities. Tetraplegics tended to make a smaller amplitude primary movement, which had lower peak velocity and greater spatial variability at peak velocity. This was followed by a larger amplitude and longer duration secondary submovement. Peak velocity of primary movement was not related to submovement incidence. Together, the primary and submovement phases of both groups were equally effective in reducing end-point error. Conclusions: C6 tetraplegic participants exhibit some subtle differences in measures of motor behaviour compared to control participants, but importantly feedforward and feedback processes work effectively in combination to achieve accurate goal-directed aiming. Keywords: Tetraplegia, Aiming, Submovement, Upper-limb control, Muscle transfe

Magnetic Field Strength in the Upper Solar Corona Using White-light Shock Structures Surrounding Coronal Mass Ejections

To measure the magnetic field strength in the solar corona, we examined 10 fast (> 1000 km/s) limb CMEs which show clear shock structures in SOHO/LASCO images. By applying piston-shock relationship to the observed CME's standoff distance and electron density compression ratio, we estimated the Mach number, Alfven speed, and magnetic field strength in the height range 3 to 15 solar radii (Rs). Main results from this study are: (1) the standoff distance observed in solar corona is consistent with those from a magnetohydrodynamic (MHD) model and near-Earth observations; (2) the Mach number as a shock strength is in the range 1.49 to 3.43 from the standoff distance ratio, but when we use the density compression ratio, the Mach number is in the range 1.47 to 1.90, implying that the measured density compression ratio is likely to be underestimated due to observational limits; (3) the Alfven speed ranges from 259 to 982 km/s and the magnetic field strength is in the range 6 to 105 mG when the standoff distance is used; (4) if we multiply the density compression ratio by a factor of 2, the Alfven speeds and the magnetic field strengths are consistent in both methods; (5) the magnetic field strengths derived from the shock parameters are similar to those of empirical models and previous estimates.Comment: Accepted for publication in ApJ, 11 Figures, 1 Tabl

Quality of Life Changes Following Peripheral Blood Stem Cell Transplantation and Participation in a Mixed-Type, Moderate-intensity, Exercise Program

Summary:The purpose of this investigation was to evaluate the impact of undertaking peripheral blood stem cell transplantation (PBST) on quality of life (QoL), and to determine the effect of participating in a mixed-type, moderate-intensity exercise program on QoL. It was also an objective to determine the relationship between peak aerobic capacity and QoL in PBST patients. QoL was assessed via the CARES questionnaire and peak aerobic capacity by a maximal graded treadmill test, pretransplant (PI), post transplant (PII) and following a 12-week intervention period (PIII). At PII, 12 patients were divided equally into a control or exercise intervention group. Undergoing a PBST was associated with a statistically but not clinically significant decline in QoL (P<0.05). Following the intervention, exercising patients demonstrated an improved QoL when compared with pretransplant ratings (P<0.01) and nonexercising transplant patients (P<0.05). Moreover, peak aerobic capacity and QoL were correlated (P<0.05). The findings demonstrated that exercise participation following oncology treatment is associated with a reduction in the number and severity of endorsed problems, which in turn leads to improvements in global, physical and psychosocial QoL. Furthermore, a relationship between fitness and QoL exists, with those experiencing higher levels of fitness also demonstrating higher QoL.Bone Marrow Transplantation (2004) 33, 553-558. doi:10.1038/sj.bmt.1704378 Published online 12 January 200

Long-time Low-latency Quantum Memory by Dynamical Decoupling

Quantum memory is a central component for quantum information processing devices, and will be required to provide high-fidelity storage of arbitrary states, long storage times and small access latencies. Despite growing interest in applying physical-layer error-suppression strategies to boost fidelities, it has not previously been possible to meet such competing demands with a single approach. Here we use an experimentally validated theoretical framework to identify periodic repetition of a high-order dynamical decoupling sequence as a systematic strategy to meet these challenges. We provide analytic bounds-validated by numerical calculations-on the characteristics of the relevant control sequences and show that a "stroboscopic saturation" of coherence, or coherence plateau, can be engineered, even in the presence of experimental imperfection. This permits high-fidelity storage for times that can be exceptionally long, meaning that our device-independent results should prove instrumental in producing practically useful quantum technologies.Comment: abstract and authors list fixe

Traceability for Mutation Analysis in Model Transformation

International audienceModel transformation can't be directly tested using program techniques. Those have to be adapted to model characteristics. In this paper we focus on one test technique: mutation analysis. This technique aims to qualify a test data set by analyzing the execution results of intentionally faulty program versions. If the degree of qualification is not satisfactory, the test data set has to be improved. In the context of model, this step is currently relatively fastidious and manually performed. We propose an approach based on traceability mechanisms in order to ease the test model set improvement in the mutation analysis process. We illustrate with a benchmark the quick automatic identification of the input model to change. A new model is then created in order to raise the quality of the test data set

Response of the mantle to flat slab evolution: Insights from local splitting beneath Peru

The dynamics of flat subduction, particularly the interaction between a flat slab and the overriding plate, are poorly understood. Here we study the (seismically) anisotropic properties and deformational regime of the mantle directly above the Peruvian flat slab. We analyze shear wave splitting from 370 local S events at 49 stations across southern Peru. We find that the mantle above the flat slab appears to be anisotropic, with modest average delay times (~0.28?s) that are consistent with ~4% anisotropy in a ~30?km thick mantle layer. The most likely mechanism is the lattice-preferred orientation of olivine, which suggests that the observed splitting pattern preserves information about the mantle deformation. We observe a pronounced change in anisotropy along strike, with predominately trench-parallel fast directions in the north and more variable orientations in the south, which we attribute to the ongoing migration of the Nazca Ridge through the flat slab system