Bilateral congenital absence of the patella in an adult: case report

Bilaterally absent patella is a rare clinical entity. Most documented cases occur in association with Nail- Patella Syndrome. This patient presented at 60 years of age with severe bilateral knee arthritis and was found to have bilaterally absent patella which had previously been undiagnosed. The patient was managed with bilateral knee replacements. This presentation highlights the need for vigilance of the condition in patients presenting with knee arthritis.Key words: Congenital absence patella knee arthroplast

Population dynamics of two jewfishes Jhonius argentatus and Johnieops vogleri) in the coastal waters of Bay of Bengal, Bangladesh

Population parameters of Jhonius argentatus and Johnieops vogleri in coastal waters of Bay of Bengal, Bangladesh were estimated by using FiSAT programme. The von Bertalanffy growth parameters, extreme length (cm) and growth constant K (year ·1) were found to be 46.50 and 0.59 for J. argentatus, and 33.50 and 0.85 for J.vogleri The Loc(cm) and Z/K estimates provided by Wetherall plot were 46.694 and 1.791 for J. argentatus, and 31.25 and 2.623 for J. vogleri. The annual rate of natural (M) and fishing mortality (F) were estimated as 1.12 and 0.78 for J. argentatus, and 1.56 and 1.28 for J. vogleri. Rate of exploitation (E) was estimated as 0.41 for J. argentatus and 0.45 for J. vogleri. About 80.04% of J. argentatus were found to be recruited during peak pulses (April-May) and 19.96% during lean pulses (October-November) and 85.75% J. vogleri during peak pulses (May-July) and 14.25% during lean pulses (September-October). The growth performance index(') was 3.11 for J. argentatus and 1.93 for J. vogleri. The total length and body weight relationship was found to be W = 0.0403 TL25723 for J. argentatus and W = 0.0907 TV3482 for J. vogleri

Role of Optimal Production Plan at the Focal Firm in Optimization of the Supply Chain

Supply chain management and optimization is a critical aspect of modern enterprises and an expanding area of research. Modeling and optimization are the traditional tools of supply chain management. The techniques have been used by many companies for planning, manufacturing, and other decision areas in supply chains. Current study is motivated by the fact that optimization studies in supply chain management have mostly considered network optimization. Supply chain management however, requires alignment between the supply chain partners at the tactical level. As a first step towards achieving this goal, current study presents a model that incorporates the activity level planning at the focal firm in a supply chain. This paper presents a new mixed integer programming model that incorporates optimization of production planning at the focal firm while optimizing the strategic alignment of the supply chain entities. The model represents a four step, multi-echelon supply chain including supplier, warehouse, manufacturer, and retailer. The manufacturer in this network represents the focal firm. This model is an attempt to integrate the production planning decisions in the network optimization decisions

Study on fish hatchery and nurseries in Mymensingh, Bangladesh

In generally, fish hatchery and nursery owners having both hatchery and nursery facilities were financially stronger, well-educated and well-trained than only nursery ponds owners in Mymensingh aquaculture region. On the other hand, only nursery pond owners were more experienced in fish seed business than only hatchery owners. Most of the owners were satisfied with existing communication facilities. Lack of technical knowledge was one of the major constraints which could be solved by ensuring proper training. This business can be made more profitable providing loan to poor farmers and improving law and order situation

Study on the effect of feeding different levels of energy in compound Pellet on performance of growing black Bengal Goat

Three different complete compound pellets containing different levels of energy, viz. SE (standard energy, ME content 10.28MJ/kg DM as per NRC, 1981), LE (low energy, ME content 9.25MJ/kg DM) 10% less ME and HE (high energy, ME content 11.30MJ/kg DM) 10% high ME than SE respectively, were prepared and fed to three groups of growing Black Bengal goats for evaluating feeding value. Completely randomized design was followed in the experiment. The effect of different levels of energy containing pellet on performance of goat was varied. Both dietary group SE and HE showed higher (p<0.01) weight gain, total CPI, total MEI, and better (p<0.05) FCR and PCR than dietary group LE and only dietary group HE showed higher (p<0.05) total DMI, MEI 100kg-1 LW d-1 and MEI kg-1W0.75 d-1 than LE and DMI kg-1W0.75 d-1 than SE and LE. Higher (p<0.01) digestibility of DM, OM, ADF, NDF and (p<0.05) CP and CF was observed in SE and HE and digestibility of NFE in HE was higher (p<0.01) than SE and LE. On the other hand, higher (p<0.05) digestibility of EE was observed in SE and LE. Digestible crude protein, TDN and D value were higher (p<0.01) in SE and HE. Digestible EE was highest (p<0.01) in LE and lowest in HE but digestible NFE was highest (p<0.01) in HE and lowest in LE. Higher (p0.05) nitrogen retention was observed in SE and HE. Meat yield, selling price of meat, and total price was highest in HE and both SE and HE showed higher (p<0.01) value of the parameters than LE. Total rearing cost was highest (p<0.01) in HE and lowest in LE. Higher (p<0.05) net profit was obtained from SE and HE than LE. There was a positive correlation between increase of energy in dietary pellet and performance. It can be concluded that high energy containing pellet may be used for commercial Black Bengal goat production in stall feeding

Quality of raw milk available at different markets of Mymensingh region of Bangladesh

The experiment was performed to evaluate the quality of raw milk available at different markets of Mymensingh region of Bangladesh. For this purpose the raw milk samples were collected from different markets of Mymensingh (T1), Jamalpur (T2), Netrokona (T3) and Serpur (T4) districts and immediately transferred to the Dairy Technology and Microbiology Laboratory, Bangladesh Agricultural University, Mymensingh for analysis. Parameters studied to monitor the quality of milk samples were physical (colour, flavour, taste, texture and specific gravity), chemical (acidity, fat, ash, protein, lactose, TS and SNF) and microbiological (total viable count and coliform count). Organoleptic test revealed that the raw milk samples of Mymensingh (T1) district were yellowish white 66.66%, Whitish 33.33%; Jamalpur (T2) were yellowish white 66.66%, light yellowish white 33.33%; Netrokona (T3) were yellowish white 100% and Serpur (T4) were yellowish white 33.33%, light yellowish white 33.33% and Whitish 33.33%. Samples of T₁, T2 and T3 had normal flavor (pleasant aromatic flavour) but only T4 had 33.33% abnormal flavour. All the raw milk samples were slightly sweet in taste. Milk samples collected from Netrokona (T3) showed normal texture (free flowing liquid) but Mymensingh (T₁), Jamalpur (T₂) and Serpur (T4) had free flowing liquid 66.66% and thin texture 33.33%.The specific gravity of all raw milk samples were more or less same (1.026±0.00). There were significant (P< 0.01) differences in chemical parameters (fat and protein) between the raw milk samples.Highest fat (34.30 ±1.00 g/kg) was found in Mymensingh (T₁) and highest protein (31.90±0.20 g/kg) was found in Serpur (T4). The overall percentage of acidity was 0.16 ±0.01. The average total viable count (cfu/ml) and coliform count (cfu/ml) were 19.26x10³ and 559.164, respectively and it was observed that total viable count (cfu/ml) and coliform count (cfu/ml) of milk samples were high.Itis concluded thatthe raw milk quality of different markets of Mymensingh region of Bangladesh was more or less similar butdid not fulfill the legal standard of milk composition. Poor hygienic milking, improper cleaning of dairy utensils, unhygienic handling during marketing of raw milk and use of adulterated with addition of water mayresponsible for unhealthy and inferiority of the milk

Effect of high and low cost brood feeds on gonado-somatic index and fecundity of freshwater prawn Macrobrachium rogenbergii de Man

Studies were conducted to observe the effects of different types of feeds on the gonado-somatic index (GSI) and fecundity of freshwater prawn Macrobrachium rogenbergii. Three different treatments (T1 T2 and T3) were designed with three types of feed as follows: (i) Saudi-Bangla Prawn feed 100% - T1 (ii) SaudiBangla prawn feed 50%+ local feed 50%- T2 and (iii) local feed 100%- T3. The results showed that the average value of gonado-somatic index (GSI) was 14.39, 14.35 and 14.36 and the average fecundity of M. rogenbergiiwas 99,741, 98,125 and 97,911 in T1 T2 and T3 respectively. No significant difference (p>00.5) was between gonado-somatic indices (GSI) and fecundities of M. rogenbergii among different feeding trails. The price of Saudi-Bangla prawn feed was very high (Tk. 23/kg) than the local feed (Tk. 14/kg). So, use of local feed was recommended for M. rogenbergii brood rearing

The effect of holmium on microstructure and mechanical properties of light metal alloy

The thesis project investigates the effect of Holmium addition on the microstructure and mechanical properties of cast ZRE1 magnesium alloy. In the advancement of automotive and aerospace industries, the next generation of light metal alloy is magnesium due to its manufacturing abilities and lightweight material. The main limitation of Mg alloys is the ability to improve its mechanical properties. Rare earth elements were used as alloying elements for improving the mechanical properties and producing a new Mg-RE alloy with modified structure and strength. In this studies, it demonstrates the addition of RE at specific amount, which could be considered as main alloy element that may lead to extend limitation of RE application. The amount of Holmium (Ho) at 0.2, 0.4 and 0.6 wt. % were added separately to ZRE1 magnesium alloy. The Optical Microsope, FESEM coupled with EDX, and XRD were used to investigate the microstructure and mechanical properties, including tensile and hardness tests. The results showed that the Ho content at 0.2wt. % increased the ultimate tensile strength and yield strength compared to others Ho composition. Finally, the hardness value was increased and the additive had a significant improvement of mechanical properties, thus the ZRE1 magnesium alloy has been improved with Holmium addition

Development of a semi-active car suspension control system using magneto-rheological damper model

In this paper, the development of a semi- active suspension control of quarter car model using fuzzy-based controller has been done. The quarter car model to be used here can be described as a nonlinear two degrees of freedom system which is subject to excitation from different road profile. The semi-active control is designed as the fuzzy control inferred by using two single input rule fuzzy modules, and the road model is used as the control force is released by actuating an electromagnetic shaker. To implement semi-active suspension system experimentally, the MR damper is used here as the adjustable damper. The MR damper is a control device that consists of a hydraulic cylinder filled with magnetically polarizable particles suspended in a liquid. MR dampers dissipate vibration by absorbing energy. Magnetorheological (MR) fluids dampers are very effective to control vibration, which use MR fluids to produce controllable damping force and provide both the reliability of passive systems and the facility of active control systems with small power supply. Due to their mechanical simplicity, high dynamic range, low power requirements, large force capacity, and robustness, offer an attractive means of vibration protection. The objectives of this are modeling of semi-active suspension system, developing controller and understanding the characteristics of the MR damper to provide effective damping for the purpose of suspension isolation or suppression car model. In this work pid, fuzzy logic and fuzzy-hybrid controller are used to control semi-active car suspension system