Coherent control of a flux qubit by phase-shifted resonant microwave pulses

The quantum state of a flux qubit was successfully pulse-controlled by using a resonant microwave. We observed Ramsey fringes by applying a pair of phase-shifted pi/2 microwave pulses without introducing detuning. With this method, the qubit state can be rotated on an arbitrary axis in the x-y plane of the Bloch sphere in a rotating frame. We obtained a qubit signal from a coherent oscillation with an angular velocity of up to 2pi*11.4 Grad/s. In combination with Rabi pulses, this method enables us to achieve full control of single qubit operation. It also offers the possibility of orders of magnitude increases in the speed of the arbitrary unitary gate operation.Comment: 3 pages, 3 figure

Effect of zero energy bound states on macroscopic quantum tunneling in high-Tc superconductor junctions

The macroscopic quantum tunneling (MQT) in the current biased high-Tc superconductor Josephson junctions and the effect of the zero energy bound states (ZES) on the MQT are theoretically investigated. We obtained the analytical formula of the MQT rate and showed that the presence of the ZES at the normal/superconductor interface leads to a strong Ohmic quasiparticle dissipation. Therefore, the MQT rate is noticeably inhibited in compared with the c-axis junctions in which the ZES are completely absent.Comment: 4 pages, 1 figure, comment and reference about recent experiment adde

Diffraction Plane Dependence of Micro Residual Stresses in Uniaxially Extended Carbon Steels

In the stress measurement using X-ray or neutron diffraction, an elastic anisotropy as well as a plastic anisotropy of crystal must be carefully considered. In the X-ray and neutron diffraction stress measurement for polycrystalline materials, a particular {hkl} plane is used in measuring lattice strains. The dependence of an X-ray elastic constant on a diffraction plane is a typical example caused by an elastic anisotropy of the crystal. The yield strength and the work hardening rate of a single crystal depend on a crystallographic direction of the crystal. The difference in the yield strength and the work hardening rate relating to the crystallographic direction develops different residual stresses measured on each {hkl} diffraction after plastic deformation of a polycrystalline material. The present paper describes the result of the neutron stress measurement on uniaxially extended low and middle carbon steels. A tri-axial residual stress state developed in the extended specimens was measured on different kind of {hkl} diffraction plane. The measurement on the {110}, {200} and {211} diffraction showed that residual stresses increased with increasing the plastic elongation and the residual stresses on {110} were compressive, {200} were tensile and those on {211} were the middle of the former two planes. Received: 30 September 2010; Revised: 28 October 2010; Accepted: 1 November 201

Diffraction Plane Dependence of Micro Residual Stresses in Uniaxially Extended Carbon Steels

In the stress measurement using X-ray or neutron diffraction, an elastic anisotropy as well as a plastic anisotropy of crystal must be carefully considered. In the X-ray and neutron diffraction stress measurement for polycrystalline materials, a particular {hkl} plane is used in measuring lattice strains. The dependence of an X-ray elastic constant on a diffraction plane is a typical example caused by an elastic anisotropy of the crystal. The yield strength and the work hardening rate of a single crystal depend on a crystallographic direction of the crystal. The difference in the yield strength and the work hardening rate relating to the crystallographic direction develops different residual stresses measured on each {hkl} diffraction after plastic deformation of a polycrystalline material. The present paper describes the result of the neutron stress measurement on uniaxially extended low and middle carbon steels. A tri-axial residual stress state developed in the extended specimens was measured on different kind of {hkl} diffraction plane. The measurement on the {110}, {200} and {211} diffraction showed that residual stresses increased with increasing the plastic elongation and the residual stresses on {110} were compressive, {200} were tensile and those on {211} were the middle of the former two planes. Received: 30 September 2010; Revised: 28 October 2010; Accepted: 1 November 201

Polar surface engineering in ultra-thin MgO(111)/Ag(111) -- possibility of metal-insulator transition and magnetism

A recent report [Kiguchi {\it et al.}, Phys. Rev. B {\bf 68}, 115402 (2003)] that the (111) surface of 5 MgO layers grown epitaxially on Ag(111) becomes metallic to reduce the electric dipole moment raises a question of what will happen when we have fewer MgO layers. Here we have revealed, first experimentally with electron energy-loss spectroscopy, that MgO(111) remains metallic even when one-layer thick, and theoretically with the density functional theory that the metallization should depend on the nature of the substrate. We further show, with a spin-density functional calculation, that a ferromagnetic instability may be expected for thicker films.Comment: 5 pages, 7 figure

Two-dimensional macroscopic quantum dynamics in YBCO Josephson junctions

We theoretically study classical thermal activation (TA) and macroscopic quantum tunneling (MQT) for a YBCO Josephson junction coupled with an LC circuit. The TA and MQT escape rate are calculated by taking into account the two-dimensional nature of the classical and quantum phase dynamics. We find that the MQT escape rate is largely suppressed by the coupling to the LC circuit. On the other hand, this coupling leads to the slight reduction of the TA escape rate. These results are relevant for the interpretation of a recent experiment on the MQT and TA phenomena in YBCO bi-epitaxial Josephson junctions.Comment: 9 pages, 2 figure

A comparative study of various extenders of milkfish, Chanos chanos (Forsskal) sperm preservation

Four chemical extenders in 7 different concentrations (potassium chloride, sodium chloride, glucose, sodium citrate, Ringer s solution, cow serum and milkfish (Chanos chanos) serum) were compared in the preservation of milkfish sperm. Results showed milkfish serum to be the most suitable of the various extenders tested. This may be attributed to suitable osmotic potential and/or presence of proteins which may have directly or indirectly influenced sperm viability. The effects of milkfish serum on the motility and fertilizing capacity of sperm at different durations of storage however need to be investigated

Validating Variational Bayes Linear Regression Method With Multi-Central Datasets.

PurposeTo validate the prediction accuracy of variational Bayes linear regression (VBLR) with two datasets external to the training dataset.MethodThe training dataset consisted of 7268 eyes of 4278 subjects from the University of Tokyo Hospital. The Japanese Archive of Multicentral Databases in Glaucoma (JAMDIG) dataset consisted of 271 eyes of 177 patients, and the Diagnostic Innovations in Glaucoma Study (DIGS) dataset includes 248 eyes of 173 patients, which were used for validation. Prediction accuracy was compared between the VBLR and ordinary least squared linear regression (OLSLR). First, OLSLR and VBLR were carried out using total deviation (TD) values at each of the 52 test points from the second to fourth visual fields (VFs) (VF2-4) to 2nd to 10th VF (VF2-10) of each patient in JAMDIG and DIGS datasets, and the TD values of the 11th VF test were predicted every time. The predictive accuracy of each method was compared through the root mean squared error (RMSE) statistic.ResultsOLSLR RMSEs with the JAMDIG and DIGS datasets were between 31 and 4.3 dB, and between 19.5 and 3.9 dB. On the other hand, VBLR RMSEs with JAMDIG and DIGS datasets were between 5.0 and 3.7, and between 4.6 and 3.6 dB. There was statistically significant difference between VBLR and OLSLR for both datasets at every series (VF2-4 to VF2-10) (P < 0.01 for all tests). However, there was no statistically significant difference in VBLR RMSEs between JAMDIG and DIGS datasets at any series of VFs (VF2-2 to VF2-10) (P > 0.05).ConclusionsVBLR outperformed OLSLR to predict future VF progression, and the VBLR has a potential to be a helpful tool at clinical settings