Tension fatigue analysis and life prediction for composite laminates

A tension fatigue life prediction methodology for composite laminates is presented. Tension fatigue tests were conducted on quasi-isotropic and orthotropic glass epoxy, graphite epoxy, and glass/graphite epoxy hybrid laminates. Edge delamination onset data were used to generate plots of strain energy release rate as a function of cycles to delamination onset. These plots were then used along with strain energy release rate analyses of delaminations initiating at matrix cracks to predict local delamination onset. Stiffness loss was measured experimentally to account for the accumulation of matrix cracks and for delamination growth. Fatigue failure was predicted by comparing the increase in global strain resulting from stiffness loss to the decrease in laminate failure strain resulting from delaminations forming at matrix cracks through the laminate thickness. Good agreement between measured and predicted lives indicated that the through-thickness damage accumulation model can accurately describe fatigue failure for laminates where the delamination onset behavior in fatigue is well characterized, and stiffness loss can be monitored in real time to account for damage growth

Anelastic relaxation and 139^{139}La NQR in La2−x_{2-x}Srx_xCuO4_4 around the critical Sr content x=0.02

Anelastic relaxation and $^{139}$La NQR relaxation measurements in La$_{2-x}$Sr$_x$CuO$_4$ for Sr content x around 2 and 3 percent, are presented and discussed in terms of spin and lattice excitations and ordering processes. It is discussed how the phase diagram of La$_{2-x}$Sr$_x$CuO$_4$ at the boundary between the antiferromagnetic (AF) and the spin-glass phase (x = 0.02) could be more complicate than previous thought, with a transition to a quasi-long range ordered state at T = 150 K, as indicated by recent neutron scattering data. On the other hand, the $^{139}$La NQR spectra are compatible with a transition to a conventional AF phase around T = 50 K, in agreement with the phase diagram commonly accepted in the literature. In this case the relaxation data, with a peak of magnetic origin in the relaxation rate around 150 K at 12 MHz and the anelastic counterparts around 80 K in the kHz range, yield the first evidence in La$_{1.98}$Sr$_{0.02}$CuO$_4$ of freezing involving simultaneously lattice and spin excitations. This excitation could correspond to the motion of charged stripes.Comment: 10 pages, 8 figure

Coupling between 4f and itinerant electrons in SmFeAsO1-xFx (0.15 < x < 0.2) superconductors: an NMR study

$^{19}$F NMR measurements in SmFeAsO$_{1-x}$F$_x$, for $0.15\leq x\leq 0.2$, are presented. The nuclear spin-lattice relaxation rate $1/T_1$ increases upon cooling with a trend analogous to the one already observed in CeCu$_{5.2}$Au$_{0.8}$, a quasi two-dimensional heavy-fermion intermetallic compound with an antiferromagnetic ground-state. In particular, the behaviour of the relaxation rate either in SmFeAsO$_{1-x}$F$_x$ or in CeCu$_{5.2}$Au$_{0.8}$ can be described in the framework of the self-consistent renormalization theory for weakly itinerant electron systems. Remarkably, no effect of the superconducting transition on $^{19}$F $1/T_1$ is detected, a phenomenon which can hardly be explained within a single band model.Comment: 4 figure

On the "spin-freezing" mechanism in underdoped superconducting cuprates

The letter deals with the spin-freezing process observed by means of NMR-NQR relaxation or by muon spin rotation in underdoped cuprate superconductors. This phenomenon, sometimes referred as coexistence of antiferromagnetic and superconducting order parameters, is generally thought to result from randomly distributed magnetic moments related to charge inhomogeneities (possibly stripes) which exhibit slowing down of their fluctuations on cooling below T$_c$ . Instead, we describe the experimental findings as due to fluctuating, vortex-antivortex, orbital currents state coexisting with d-wave superconducting state. A direct explanation of the experimental results, in underdoped Y$_{1-x}$Ca$_x$Ba$_2$Cu$_3$O$_{6.1}$ and La$_{2-x}$Sr$$CuO$_4$, is thus given in terms of freezing of orbital current fluctuations

Kohn-Sham Exchange Potential for a Metallic Surface

The behavior of the surface barrier that forms at the metal-vacuum interface is important for several fields of surface science. Within the Density Functional Theory framework, this surface barrier has two non-trivial components: exchange and correlation. Exact results are provided for the exchange component, for a jellium metal-vacuum interface, in a slab geometry. The Kohn-Sham exact-exchange potential $V_{x}(z)$ has been generated by using the Optimized Effective Potential method, through an accurate numerical solution, imposing the correct boundary condition. It has been proved analytically, and confirmed numerically, that $V_{x}(z\to \infty)\to - e^{2}/z$; this conclusion is not affected by the inclusion of correlation effects. Also, the exact-exchange potential develops a shoulder-like structure close to the interface, on the vacuum side. The issue of the classical image potential is discussed.Comment: Phys. Rev. Lett. (to appear

Life cycle assessment of a floating offshore wind farm in Italy

Mitigation of climate change requires consistent actions toward the reduction of emissions from the energy sector: in the last years, renewable energy technologies, such as wind power, have become a cost-effective option to pursue the transition to low emission systems for power generation. Offshore wind energy can provide access to additional wind resources, also overcoming some issues related to onshore wind deployments such as land-use competition and social acceptability. The Life Cycle Assessment (LCA) methodology can be used to gain insight into the environmental performances of different technologies, e.g. renewable energy generation technologies, along the lifecycle stages and across a number of impact categories. This paper reports the cradle-to-grave LCA of a floating offshore wind farm, consisting of 190 wind turbines with 14.7 MW rated power, intended to be deployed in the Mediterranean Sea. The employed technology is represented by the IEA 15 MW reference wind turbine supported by the reference semi-submersible platform. The selected functional unit is the delivery of 1 GWh of electricity to the onshore grid and the impact assessment method is the EPD (version 2018), which is usually used for the creation of Environmental Product Declarations (EPDs) and considers 8 impact categories. The results of the analysis show that the supply of raw materials, especially steel, for aerogenerators and floaters is the most significant contributor to the overall potential impacts in all the impact categories, except for abiotic depletion of elements, where power cables are the hotspot. In the perspective of decarbonisation, the estimated carbon intensity is 31 g CO2eq/kWh and so it results competitive with other low emissions electricity generation technologies. To compare the estimated global warming impacts to other studies, some harmonisations efforts on capacity factor and lifetime of turbines are made. Moreover, the wind farm performance has been evaluated in terms of carbon and energy payback time, estimated in 2 and 3 years respectively, showing a substantial benefit when compared to the expected 30-year lifetime. As a conclusion, despite the number of approximations and conservative assumptions, floating offshore wind power, represented by the modelled case study, can be considered a promising technology and has been found to be already competitive with other renewable electricity generation technologies. Future research should address the uncertainty rooted to the data: repeating the analysis relying on the executive project, and therefore on a more detailed modelling, would help to get more accurate results

Two-bands effect on the superconducting fluctuating diamagnetism in MgB&#8322

The field dependence of the magnetization above the transition temperature Tc in MgB&#8322; is shown to evidence a diamagnetic contribution consistent with superconducting fluctuations reflecting both the &#963; and &#960; bands. In particular, the upturn field Hup in the magnetization curve, related to the incipient effect of the magnetic field in quenching the fluctuating pairs, displays a double structure, in correspondence to two correlation lengths. The experimental findings are satisfactorily described by the extension to the diamagnetism of a recent theory for paraconductivity, in the framework of a zero-dimensional model for the fluctuating superconducting droplets above Tc

A closed form for the electrostatic interaction between two rod-like charged objects

We have calculated the electrostatic interaction between two rod-like charged objects with arbitrary orientations in three dimensions. we obtained a closed form formula expressing the interaction energy in terms of the separation distance between the centers of the two rod-like objects, $r$, their lengths (denoted by $2l_1$ and $2l_2$), and their relative orientations (indicated by $\theta$ and $\phi$). When the objects have the same length ($2l_1=2l_2=l$), for particular values of separations, i.e for $r\leq0.8 l$, two types of minimum are appeared in the interaction energy with respect to $\theta$. By employing the closed form formula and introducing a scaled temperature $t$, we have also studied the thermodynamic properties of a one dimensional system of rod-like charged objects. For different separation distances, the dependence of the specific heat of the system to the scaled temperature has been studied. It is found that for $r<0.8 l$, the specific heat has a maximum.Comment: 10 pages, 9 figures, 1 table, Accepted by J. Phys.: Condens. Matte