A 43-Gbps Lithium Niobate Modulator Driver Module

This paper describes the realization of a 43-Gbps Lithium Niobate modulator driver module. The NRZ driver module utilizes four stages of GaAs p-HEMT MMIC amplifiers integrated with an output level detector and feedback loop to provide thermal stability and external control of the output swing. The bias and loop control circuitry are contained in the housing on a PC board external to the sealed MIC section. The integrated module (50.8 x 73.4 x 9.5 mm 3) provides 6.0 Vp-p controllable single-ended output voltage while dissipating only 4 watt

Absolute negative refraction and imaging of unpolarized electromagnetic waves by two-dimensional photonic crystals

Absolute negative refraction regions for both polarizations of electromagnetic wave in two-dimensional photonic crystal have been found through both the analysis and the exact numerical simulation. Especially, absolute all-angle negative refraction for both polarizations has also been demonstrated. Thus, the focusing and image of unpolarized light can be realized by a microsuperlens consisting of the two-dimensional photonic crystals. The absorption and compensation for the losses by introducing optical gain in these systems have also been discussed

Oblique frozen modes in periodic layered media

We study the classical scattering problem of a plane electromagnetic wave incident on the surface of semi-infinite periodic stratified media incorporating anisotropic dielectric layers with special oblique orientation of the anisotropy axes. We demonstrate that an obliquely incident light, upon entering the periodic slab, gets converted into an abnormal grazing mode with huge amplitude and zero normal component of the group velocity. This mode cannot be represented as a superposition of extended and evanescent contributions. Instead, it is related to a general (non-Bloch) Floquet eigenmode with the amplitude diverging linearly with the distance from the slab boundary. Remarkably, the slab reflectivity in such a situation can be very low, which means an almost 100% conversion of the incident light into the axially frozen mode with the electromagnetic energy density exceeding that of the incident wave by several orders of magnitude. The effect can be realized at any desirable frequency, including optical and UV frequency range. The only essential physical requirement is the presence of dielectric layers with proper oblique orientation of the anisotropy axes. Some practical aspects of this phenomenon are considered.Comment: text and 9 figure

Efficient light coupling into a photonic crystal waveguide with flatband slow mode

We design an efficient coupler to transmit light from a strip waveguide into the flatband slow mode of a photonic crystal waveguide with ring-shaped holes. The coupler is a section of a photonic crystal waveguide with a higher group velocity, obtained by different ring dimensions. We demonstrate coupling efficiency in excess of 95% over the 8 nm wavelength range where the photonic crystal waveguide exhibits a quasi constant group velocity vg = c/37. An analysis based on the small Fabry-P\'erot resonances in the simulated transmission spectra is introduced and used for studying the effect of the coupler length and for evaluating the coupling efficiency in different parts of the coupler. The mode conversion efficiency within the coupler is more than 99.7% over the wavelength range of interest. The parasitic reflectance in the coupler, which depends on the propagation constant mismatch between the slow mode and the coupler mode, is lower than 0.6% within this wavelength range.Comment: 11 pages, 7 figures, submitted to Photonics and Nanostructures - Fundamentals and Application

Radiation induced force between two planar waveguides

We study the electromagnetic force exerted on a pair of parallel slab waveguides by the light propagating through them. We have calculated the dependence of the force on the slab separation by means of the Maxwell--Stress tensor formalism and we have discussed its main features for the different propagation modes: spatially symmetric (antisymmetric) modes give rise to an attractive (repulsive) interaction. We have derived the asymptotic behaviors of the force at small and large separation and we have quantitatively estimated the mechanical deflection induced on a realistic air-bridge structure.Comment: 10 pages, 6 figure

Determination of Effective Permittivity and Permeability of Metamaterials from Reflection and Transmission Coefficients

We analyze the reflection and transmission coefficients calculated from transfer matrix simulations on finite lenghts of electromagnetic metamaterials, to determine the effective permittivity and permeability. We perform this analysis on structures composed of periodic arrangements of wires, split ring resonators (SRRs) and both wires and SRRs. We find the recovered frequency-dependent permittivity and permeability are entirely consistent with analytic expressions predicted by effective medium arguments. Of particular relevance are that a wire medium exhibits a frequency region in which the real part of permittivity is negative, and SRRs produce a frequency region in which the real part of permeability is negative. In the combination structure, at frequencies where both the recovered real part of permittivity and permeability are simultaneously negative, the real part of the index-of-refraction is found also to be unambigously negative.Comment: *.pdf file, 5 figure

Nonlinear eigenvalue problem for optimal resonances in optical cavities

The paper is devoted to optimization of resonances in a 1-D open optical cavity. The cavity's structure is represented by its dielectric permittivity function e(s). It is assumed that e(s) takes values in the range 1 <= e_1 <= e(s) <= e_2. The problem is to design, for a given (real) frequency, a cavity having a resonance with the minimal possible decay rate. Restricting ourselves to resonances of a given frequency, we define cavities and resonant modes with locally extremal decay rate, and then study their properties. We show that such locally extremal cavities are 1-D photonic crystals consisting of alternating layers of two materials with extreme allowed dielectric permittivities e_1 and e_2. To find thicknesses of these layers, a nonlinear eigenvalue problem for locally extremal resonant modes is derived. It occurs that coordinates of interface planes between the layers can be expressed via arg-function of corresponding modes. As a result, the question of minimization of the decay rate is reduced to a four-dimensional problem of finding the zeroes of a function of two variables.Comment: 16 page