New approach of complex demodulation zoom: frequency filtering zoom

The spectral component discrimination or the estimation of one or more signal frequencies are classical problems in signal processing. In this paper, we study a nerv technic to increase the frequency resolution called frequency filtering zoom (LFF) . This method is complementary of existing methods since it allows to save the spectrum amplitude and phase of the signal . On the other hand, a software real time analysis of signal is possible by this zoom .La séparation de composantes spectrales proches ou l'évaluation précise d'une ou plusieurs fréquences d'un signal sont des problèmes classiques en traitement du signal . Nous présentons dans cet article une nouvelle technique d'accroissement de la résolution fréquentielle appelée loupe par filtrage fréquentiel (LFF) . Cette méthode présente J'avantage, par rapport aux zoom existants, de restituer les spectres d'amplitude et de phase du signal traité . D'autre part cette loupe a été conçue de façon à permettre, par logiciel, un traitement en temps réel de signaux basse fréquence

Wavelet Based Fractal Analysis of Airborne Pollen

The most abundant biological particles in the atmosphere are pollen grains and spores. Self protection of pollen allergy is possible through the information of future pollen contents in the air. In spite of the importance of airborne pol len concentration forecasting, it has not been possible to predict the pollen concentrations with great accuracy, and about 25% of the daily pollen forecasts have resulted in failures. Previous analysis of the dynamic characteristics of atmospheric pollen time series indicate that the system can be described by a low dimensional chaotic map. We apply the wavelet transform to study the multifractal characteristics of an a irborne pollen time series. We find the persistence behaviour associated to low pollen concentration values and to the most rare events of highest pollen co ncentration values. The information and the correlation dimensions correspond to a chaotic system showing loss of information with time evolution.Comment: 11 pages, 7 figure

Advance in the conceptual design of the European DEMO magnet system

The European DEMO, i.e. the demonstration fusion power plant designed in the framework of the Roadmap to Fusion Electricity by the EUROfusion Consortium, is approaching the end of the pre-conceptual design phase, to be accomplished with a Gate Review in 2020, in which all DEMO subsystems will be reviewed by panels of independent experts. The latest 2018 DEMO baseline has major and minor radius of 9.1 m and 2.9 m, plasma current 17.9 MA, toroidal field on the plasma axis 5.2 T, and the peak field in the toroidal-field (TF) conductor 12.0 T. The 900 ton heavy TF coil is prepared in four lowerature-superconductor (LTS) variants, some of them differing slightly, other significantly, from the ITER TF coil design. Two variants of the CS coils are investigated - a purely LTS one resembling the ITER CS, and a hybrid coil, in which the innermost layers made of HTS allow the designers either to increase the magnetic flux, and thus the duration of the fusion pulse, or to reduce the outer radius of the CS coil. An issue presently investigated by mechanical analyzes is the fatigue load. Two variants of the poloidal field coils are being investigated. The magnet and conductor design studies are accompanied by the experimental tests on both LTS and HTS prototype samples, covering a broad range of DC and AC tests. Testing of quench behavior of the 15 kA HTS cables, with size and layout relevant for the fusion magnets and cooled by forced flow helium, is in preparation.</p

The DEMO magnet system – Status and future challenges

We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PROCESS systems code. It defines a major and minor radius of 9.1 m and 2.9 m, respectively, an on-axis magnetic field of 5.3 T resulting in a peak field on the toroidal field (TF) conductor of 12.0 T. Four variants, all based on low-temperature superconductors (LTS), have been designed for the 16 TF coils. Two of these concepts were selected to be further pursued during the Concept Design Phase (CDP): the first having many similarities to the ITER TF coil concept and the second being the most innovative one, based on react-and-wind (RW) Nb3Sn technology and winding the coils in layers. Two variants for the five Central Solenoid (CS) modules have been investigated: an LTS-only concept resembling to the ITER CS and a hybrid configuration, in which the innermost layers are made of high-temperature superconductors (HTS), which allows either to increase the magnetic flux or to reduce the outer radius of the CS coil. Issues related to fatigue lifetime which emerged in mechanical analyses will be addressed further in the CDP. Both variants proposed for the six poloidal field coils present a lower level of risk for future development. All magnet and conductor design studies included thermal-hydraulic and mechanical analyses, and were accompanied by experimental tests on both LTS and HTS prototype samples (i.e. DC and AC measurements, stability tests, quench evolution etc.). In addition, magnet structures and auxiliary systems, e.g. cryogenics and feeders, were designed at pre-concept level. Important lessons learnt during this first phase of the project were fed into the planning of the CDP. Key aspects to be addressed concern the demonstration and validation of critical technologies (e.g. industrial manufacturing of RW Nb3Sn and HTS long conductors, insulation of penetrations and joints), as well as the detailed design of the overall Magnet System and mechanical structures

Plasma physics and control studies planned in JT-60SA for ITER and DEMO operations and risk mitigation

| openaire: EC/H2020/633053/EU//EUROfusionA large superconducting machine, JT-60SA has been constructed to provide major contributions to the ITER program and DEMO design. For the success of the ITER project and fusion reactor, understanding and development of plasma controllability in ITER and DEMO relevant higher beta regimes are essential. JT-60SA has focused the program on the plasma controllability for scenario development and risk mitigation in ITER as well as on investigating DEMO relevant regimes. This paper summarizes the high research priorities and strategy for the JT-60SA project. Recent works on simulation studies to prepare the plasma physics and control experiments are presented, such as plasma breakdown and equilibrium controls, hybrid and steady-state scenario development, and risk mitigation techniques. Contributions of JT-60SA to ITER and DEMO have been clarified through those studies.Peer reviewe

Operating a full tungsten actively cooled tokamak: overview of WEST first phase of operation

WEST is an MA class superconducting, actively cooled, full tungsten (W) tokamak, designed to operate in long pulses up to 1000 s. In support of ITER operation and DEMO conceptual activities, key missions of WEST are: (i) qualification of high heat flux plasma-facing components in integrating both technological and physics aspects in relevant heat and particle exhaust conditions, particularly for the tungsten monoblocks foreseen in ITER divertor; (ii) integrated steady-state operation at high confinement, with a focus on power exhaust issues. During the phase 1 of operation (2017–2020), a set of actively cooled ITER-grade plasma facing unit prototypes was integrated into the inertially cooled W coated startup lower divertor. Up to 8.8 MW of RF power has been coupled to the plasma and divertor heat flux of up to 6 MW m−2 were reached. Long pulse operation was started, using the upper actively cooled divertor, with a discharge of about 1 min achieved. This paper gives an overview of the results achieved in phase 1. Perspectives for phase 2, operating with the full capability of the device with the complete ITER-grade actively cooled lower divertor, are also described

Investigations About Quench Detection in the ITER TF Coil System

22nd International Conference on Magnet Technology (MT), ITER Org, Marseille, FRANCE, SEP 12-16, 2011International audienceDue to the large stored energy (40 GJ) and the small allowed number of fast discharges (50), severe requirements have been put in the ITER project for the Toroidal Field (TF) coil system in comparison with the Poloidal Field (PF) and Central Solenoid (CS) systems, aiming at avoiding any fast discharge not related to a quench. A very important point, which has to be examined, is whether a quench detection based on a co-wound tape, recommended in the ITER project, and located inside the conductor insulation is compulsory to ensure the inductive voltage compensation. Another possible solution is the balance of the voltage of TF coils or TF coils subcomponents. The sensitivity of the quench detection systems is examined according to the different types of flux variations experienced in the machine. During plasma discharge, the sensitivity to poloidal flux variations and plasma paramagnetism is highlighted, the last effect being illustrated for Tore Supra. It is eventually recommended to select the quench detection by balancing coils or coils subcomponents. This solution has been adopted for Tore Supra, KSTAR and in JT-60SA project. The level of refinement should be adjusted during commissioning, as a function of the required voltage detection level (0.4 V) and to the required holding time (1 s)