Extraction of Regression Relations of Tidal Rivers by Artificial Neural Network Method

Source: ICHE Conference Archive - https://mdi-de.baw.de/icheArchiv

Evaluation of Different Methods for Considering Bar-Concrete Interaction in Nonlinear Dynamic Analysis of RC Frames by Using Layer Section Theory

In this paper, the bond-slip effect has been applied to the numerical equations in the process of nonlinear dynamic analysis of reinforced concrete frames. The formulation is similar to that of the layer sectiontheory, but the perfect bond assumption has been removed. The precision of the proposed method in considering the real nonlinear behavior of reinforced concrete frames has been compared to the precision of two other suggested methods for considering bond-slip effect in layer model. Among the capabilities of this method for seismic analysis are its ability of modeling the embedded lengths of bars within joints and nonlinear modeling of bond-slip. The precision of the analytical results were compared with the experimental ones achieved from a one bay two storeyframe under seismic loading on the shaking table. According to the numerical results, the presence or absence of bond effect in numerical modeling and analysis will bring about considerable different results, including results for deformation and forces. All the studied methods for inserting the bond-slip effect into the layer model can relativelyimprove the accuracy of analytical results compared to experimental ones. The proposed method of this study has proved to enjoy the highest accuracy with regard to time-history seismic analysis of reinforced concrete frames. Among the capabilities of the proposed method, we may refer to its ability to model beam-column and joint element’s nonlinear behavior separately

Three Dimensional Seepage Analyses in Mollasadra Dam after Its Impoundments

Mollasadra dam is an earth fill dam with a clayey core and a height of 72 m from river bed, constructed on Kor River. pore water pressure in the dam was investigated following its construction and first and second impoundments. The dam was modeled by a finite element mesh. After the first and second dam impoundments, the overall trend in monitored pore water pressure was well modeled by the transient analysis. The result showed the six month time period between impoundments was long enough for the pore water pressure to reach equilibrium everywhere throughout the core, except where considerable initial constructioninduced pore water pressure was observed. High values of construction-induced pore water pressure at elevation2050 m did not dissipate completely during the 6 month period of almost constant reservoir level (el. 2098.3 m) and the pore pressures were still at the transient state throughout the core. Therefore, it was concluded that porepressures in the core of earth fill dams may not achieve steady state conditions even several months after the dam construction and impoundments

Analysis of Negligence in field of Neonatology in Medical Commissions Office in Tehran, Iran

Background: Despite progression of medical’s science, patient’s complaints are increased. Analysis of risk factors cause to decrease complaints.Methods: This research is a retrospective study of medical malpractice cases in neonates’ from 2012 to2014 in Medical Commissions Office in Tehran province.Results: Among 171 cases were studied, 53 cases were in neonatal period. 30.1% was announced medical malpractice. Ages of most infants were 0-10 days (88.6%), 66% of babies were male, 69.8% had full-term gestation, 62.2% APGAR (Appearance, Pulse, Grimace, Activity, Respiration) score of neonates was above 7 and 73.5% of cases were the first child of the family. Most babies had cerebral palsy and asphyxia (20.7%), then respiratory distress syndrome (11.3%), furthermore shoulders dystocia and brachial plexus damage (7.5%). Ages of most plaintiffs (parents of neonates) were 30-39 years. Most of them were male, and their levels of education were high school and lower. The most cause of parent’s claim was medical mistake.Conclusion: Levels of parents’ education may relationship with complaints and increasing their awareness can effect to decrease these

Multi-Modal retinal image analysis via deep learning for the diagnosis of intermediate dry age-related macular degeneration: a feasibility study

Background and Objective. To determine if using a multi-input deep learning approach in the image analysis of optical coherence tomography (OCT), OCT angiography (OCT-A), and colour fundus photographs increases the accuracy of a CNN to diagnose intermediate dry age-related macular degeneration (AMD). Patients and Methods. Seventy-five participants were recruited and divided into three cohorts: young healthy (YH), old healthy (OH), and patients with intermediate dry AMD. Colour fundus photography, OCT, and OCT-A scans were performed. The convolutional neural network (CNN) was trained on multiple image modalities at the same time. Results. The CNN trained using OCT alone showed a diagnostic accuracy of 94%, whilst the OCT-A trained CNN resulted in an accuracy of 91%. When multiple modalities were combined, the CNN accuracy increased to 96% in the AMD cohort. Conclusions. Here we demonstrate that superior diagnostic accuracy can be achieved when deep learning is combined with multimodal image analysis

The economic impacts of climate change on the rice production in Malaysia.

This study attempts to estimate the potential impacts of climate change on the rice production in Malaysia. The crop model ORYZA2000 was used to simulate rice yield of MR 219 variety in eight granary areas of Malaysia from 1999-2007. The model predicted a reduction in rice yield of 0.36 t ha -1 under the scenario of an increase in temperature by 2°C and at the current CO 2 level of 383 ppm. With the reduction in rice yield, the economic loss to the Malaysian rice industry was estimated at RM162.531 million per year. Under the scenario of increase of CO 2 concentration from 383 to 574 ppm and with 2°C rise in temperature, it can be predicted that there will also be a decline in rice yield by 0.69 t ha -1 and consequently the economic loss will be at RM299.145 million per year for the rice industry. With the above potential impacts, some adaptation and mitigation strategies to overcome the adverse effects of climate change on rice production were recommended

Development of ferroelectric domains and topological defects in vacancy doped ceramics of h-LuMnO₃

Self-doping of the h-LuMnxO3±δ (0.92 ≤ x ≤ 1.12) phase and changes in the sintering time are applied to investigate the formation and annihilation of antiphase ferroelectric (FE) domains in bulk ceramics. The increase in the annealing time in sintering results in growth of FE domains, which depends on the type of vacancy, 6-fold vortices with dimensions of the order of 20 μm being observed. Interference of planar defects of the lattice with the growth of topological defects shows breaking of 6-fold symmetry in the self-doped ceramics. The role of grain boundaries in the development of topological defects has been studied. Dominance of the atypical FE domain network in very defective h-LuMnxO3±δ lattices saturated with Mn vacancies (x < 1) was also identified in the current study. After a long annealing time, scattered closed-loops of nano-dimensions are often observed isolated inside large FE domains with opposite polarization. Restoring of the polarization after alternative poling with opposite electrical fields is observed in FE domains. Stress/strain in the lattice driven by either planar defects or chemical inhomogeneity results in FE polarization switching on the nanoscale and further formation of nano-vortices, with detailed investigation being carried out by electron microscopy. Pinning of FE domains to planar defects is explored in the present microscopy analysis, and nano-scale observation of lattices is used to explain features of the ferroelectricity revealed in Piezo Force Microscopy images of the ceramics

Experimental Study of the Effect of Displacement of Vanes Submerged at Channel Width on Distribution of Velocity and Shear Stress in a 180 Degree Bend

Shear stress is a parameter of high significance. Through knowledge of this parameter, assessment of scour or sedimentations at different points of bed is made viable. Therefore, this paper investigated alterations in shear stress along the bend, specifically around a bridge pier, under the influence of applying submerged vanes at the upstream side of the bridge pier. With the aim of modeling submerged vanes, vanes of Plexiglas with a thickness of 20% of the pier diameter, a length of 1.5 times the pier diameter, and submergence ratio of 75% were utilized. The vanes were installed at a distance equal to 5 times the pier diameter from the pier center at a distance of 40 to 60% of the channel width from the inner bank at the upstream side of the bridge pier. Acoustic-Doppler Velocity velocimeter device was utilized for measuring three-dimensional velocity components. The experiments were conducted in a 1-meter-wide flume with a degree of curvature of 180. The results of the study suggested that upon reaching the bend apex, the maximum flow turbulence rate occurred in a transverse direction in the case of installing submerged vanes at a distance of 40% of the channel width from the inner bank towards the inner wall; while in the case of installing submerged vanes at a distance of 60% of the channel width from the inner bank, it occurred towards the outer wall, and it could be observed that the maximum longitudinal and vertical components of turbulence rate increased by 16 and 5.5% respectively upon increase in the distance of submerged vanes from the inner bank. Furthermore, the values of and turbulence shear stresses at the outer bank in the case of installing the vanes at a distance of 40% of the channel width from the inner bank were smaller than those in the case of installing the submerged vanes at a distance of 60% of the channel width from the inner bank

Evaluation of tidal bores effects of Persian Gulf on the stage-discharge curve of the Karun River

The rivers that pour to seas and oceans are known as tidal rivers. A governing factor on tidal rivers is tidal bores which are produced by the gravity of moon and sun. Reflection of waves from beaches and the shape of beaches and effects of shallow water, effect on tidal bores in the mouth of tidal rivers. These factors convert tidal bores from time periodic condition to no periodic condition. Tidal bores move to upstream of river while fluvial flows go toward downstream of river. Because of combination of Tidal bores and fluvial flows, hydraulic and hydrologic conditions are very complex in the tidal rivers. Measurement of velocity and discharge of current is impossible in the tidal limit of tidal rivers. For determination of stage-discharge curves, an especial method is needed. In this research, water surface elevation is estimated by using discharge of fluvial flow in Ahvaz and tidal height in Khoramshar in tidal limit of the Karun River (from Khoramshar to Darkhovein). Water surface elevation is shown by structural curves and regression relations. These curves and relations are suitable tools for determination of water surface elevation in the tidal limit of the Karun River by using discharge of fluvial flow in Ahvaz and tidal height of Khoramshar