The Twente turbulent Taylor-Couette (T3C) facility: Strongly turbulent (multiphase) flow between two independently rotating cylinders

A new turbulent Taylor-Couette system consisting of two independently rotating cylinders has been constructed. The gap between the cylinders has a height of 0.927 m, an inner radius of 0.200 m, and a variable outer radius (from 0.279 to 0.220 m). The maximum angular rotation rates of the inner and outer cylinder are 20 and 10 Hz, respectively, resulting in Reynolds numbers up to 3.4 x 10^6 with water as working fluid. With this Taylor-Couette system, the parameter space (Re_i, Re_o, {\eta}) extends to (2.0 x 10^6, {\pm}1.4 x 10^6, 0.716-0.909). The system is equipped with bubble injectors, temperature control, skin-friction drag sensors, and several local sensors for studying turbulent single-phase and two-phase flows. Inner cylinder load cells detect skin-friction drag via torque measurements. The clear acrylic outer cylinder allows the dynamics of the liquid flow and the dispersed phase (bubbles, particles, fibers, etc.) inside the gap to be investigated with specialized local sensors and nonintrusive optical imaging techniques. The system allows study of both Taylor-Couette flow in a high-Reynolds-number regime, and the mechanisms behind skin-friction drag alterations due to bubble injection, polymer injection, and surface hydrophobicity and roughness.Comment: 13 pages, 14 figure

Measurement of angular momentum transport in turbulent flow between independently rotating cylinders

We present measurements of the angular momentum flux (torque) in Taylor-Couette flow of water between independently rotating cylinders for all regions of the \(\Omega_1, \Omega_2\) parameter space at high Reynolds numbers, where $\Omega_1$ \(\Omega_2\) is the inner (outer) cylinder angular velocity. We find that the Rossby number Ro = \(\Omega_1 - \Omega_2\)/\Omega_2 fully determines the state and torque $G$ as compared to G(Ro = \infty) \equiv \Gi. The ratio G/\Gi is a linear function of $Ro^{-1}$ in four sections of the parameter space. For flows with radially-increasing angular momentum, our measured torques greatly exceed those of previous experiments [Ji \textit{et al.}, Nature, \textbf{444}, 343 (2006)], but agree with the analysis of Richard and Zahn [Astron. Astrophys., \textbf{347}, 734 (1999)].Comment: 4 pages, 4 figures, to appear in Physical Review Letter

Accommodation of penetrative strain during deformation above a ductile décollement

The accommodation of shortening by penetrative strain is widely considered as an important process during contraction, but the distribution and magnitude of penetrative strain in a contractional system with a ductile décollement are not well understood. Penetrative strain constitutes the proportion of the total shortening across an orogen that is not accommodated by the development of macroscale structures, such as folds and thrusts. In order to create a framework for understanding penetrative strain in a brittle system above a ductile décollement, eight analog models, each with the same initial configuration, were shortened to different amounts in a deformation apparatus. Models consisted of a silicon polymer base layer overlain by three fine-grained sand layers. A grid was imprinted on the surface to track penetra- tive strain during shortening. As the model was shortened, a series of box fold structures developed, with a zone of penetrative strain in the foreland. Penetrative strain in the foreland decreases away from the fold belt. Restoration of the model layers to the horizontal indicates that penetrative strain accounts for 90.5%-30.8% of total shortening in a brittle system with a ductile décollement, compared to 45.2%–3.6% within a totally brittle system. Analog model geometries were consistent with the deformation styles observed in salt-floored systems, such as the Swiss Jura. Penetrative strain has not been accounted for in previous studies of salt-floored regions and estimates of this type could help resolve concerns of missing shortening highlighted by global positioning system data

Beyond homozygosity mapping: family-control analysis based on Hamming distance for prioritizing variants in exome sequencing

A major challenge in current exome sequencing in autosomal recessive (AR) families is the lack of an effective method to prioritize single-nucleotide variants (SNVs). AR families are generally too small for linkage analysis, and length of homozygous regions is unreliable for identification of causative variants. Various common filtering steps usually result in a list of candidate variants that cannot be narrowed down further or ranked. To prioritize shortlisted SNVs we consider each homozygous candidate variant together with a set of SNVs flanking it. We compare the resulting array of genotypes between an affected family member and a number of control individuals and argue that, in a family, differences between family member and controls should be larger for a pathogenic variant and SNVs flanking it than for a random variant. We assess differences between arrays in two individuals by the Hamming distance and develop a suitable test statistic, which is expected to be large for a causative variant and flanking SNVs. We prioritize candidate variants based on this statistic and applied our approach to six patients with known pathogenic variants and found these to be in the top 2 to 10 percentiles of ranks

Collective patterns arising out of spatio-temporal chaos

We present a simple mathematical model in which a time averaged pattern emerges out of spatio-temporal chaos as a result of the collective action of chaotic fluctuations. Our evolution equation possesses spatial translational symmetry under a periodic boundary condition. Thus the spatial inhomogeneity of the statistical state arises through a spontaneous symmetry breaking. The transition from a state of homogeneous spatio-temporal chaos to one exhibiting spatial order is explained by introducing a collective viscosity which relates the averaged pattern with a correlation of the fluctuations.Comment: 11 pages (Revtex) + 5 figures (postscript

Convergent and Biomimetic Enantioselective Total Synthesis of (−)-Communesin F

The first biomimetic enantioselective total synthesis of (-)-communesin F based on a late-stage heterodimerization and aminal exchange is described. Our synthesis features the expedient diazene-directed assembly of two advanced fragments to secure the congested C3a-C3a′ linkage in three steps, followed by a highly efficient biogenetically inspired aminal reorganization to access the heptacyclic communesin core in only two additional steps. Enantioselective syntheses of the two fragments were developed, with highlights including the catalytic asymmetric halocyclization and diastereoselective oxyamination reactions of tryptamine derivatives, a stereoselective sulfinimine allylation, and an efficient cyclotryptamine-C3a-sulfamate synthesis by either a new silver-promoted nucleophilic amination or a rhodium-catalyzed C-H amination protocol. The versatile syntheses of the fragments, their stereocontrolled assembly, and the efficient aminal exchange as supported by in situ monitoring experiments, in addition to the final stage N1′-acylation of the communesin core, provide a highly convergent synthesis of (-)-communesin F.National Institute of General Medical Sciences (U.S.) (GM089732)National Science Foundation (U.S.) (CHE1212527)Ruth L. Kirschstein National Research Service Award ((F32GM097776)Natural Sciences and Engineering Research Council of Canada (PGS D3 Scholarship

Boolean Chaos

We observe deterministic chaos in a simple network of electronic logic gates that are not regulated by a clocking signal. The resulting power spectrum is ultra-wide-band, extending from dc to beyond 2 GHz. The observed behavior is reproduced qualitatively using an autonomously updating Boolean model with signal propagation times that depend on the recent history of the gates and filtering of pulses of short duration, whose presence is confirmed experimentally. Electronic Boolean chaos may find application as an ultra-wide-band source of radio wavesComment: 10 pages and 4 figur