Modelocked quantum dot vertical external cavity surface emitting laser

We report the first successful modelocking of a vertical external cavity surface emitting laser (VECSEL) with a quantum dot (QD) gain region. The VECSEL has a total of 35 QD-layers with an emission wavelength of about 1060 nm. In SESAM modelocked operation, we obtain an average output power of 27.4 mW with 18-ps pulses at a repetition rate of 2.57 GHz. This QD-VECSEL is used as-grown on a 450 μm thick substrate, which limits the average output powe

Submonolayer Quantum Dots for High Speed Surface Emitting Lasers

We report on progress in growth and applications of submonolayer (SML) quantum dots (QDs) in high-speed vertical-cavity surface-emitting lasers (VCSELs). SML deposition enables controlled formation of high density QD arrays with good size and shape uniformity. Further increase in excitonic absorption and gain is possible with vertical stacking of SML QDs using ultrathin spacer layers. Vertically correlated, tilted or anticorrelated arrangements of the SML islands are realized and allow QD strain and wavefunction engineering. Respectively, both TE and TM polarizations of the luminescence can be achieved in the edge-emission using the same constituting materials. SML QDs provide ultrahigh modal gain, reduced temperature depletion and gain saturation effects when used in active media in laser diodes. Temperature robustness up to 100 °C for 0.98 μm range vertical-cavity surface-emitting lasers (VCSELs) is realized in the continuous wave regime. An open eye 20 Gb/s operation with bit error rates better than 10−12has been achieved in a temperature range 25–85 °Cwithout current adjustment. Relaxation oscillations up to ∼30 GHz have been realized indicating feasibility of 40 Gb/s signal transmission

40 GHz small-signal cross-gain modulation in 1.3m quantum dot semiconductor optical amplifiers

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 93, 051110 (2008) and may be found at https://doi.org/10.1063/1.2969060.Small-signal cross-gain modulation of quantum dot based semiconductor optical amplifiers (QD SOAs), having a dot-in-a-well structure, is presented, demonstrating superiority for ultrahigh bit rate wavelength conversion. Optimization of the QD SOA high speed characteristics via bias current and optical pump power is presented and a small-signal 3 dB bandwidth exceeding 40 GHz is demonstrated. The -doped samples investigated here enable small-signal wavelength conversion within a range of 30 nm, limited mainly by the gain bandwidth.DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, BauelementeEC/FP6/027638/EU/Transparent Ring Interconnection Using Multiwavelngth PHotonic switches/TRIUMPHEC/FP6/500101/EU/Self-Assembled semiconductor Nanostructures for new Devices in photonics and Electronics/SANDI

Selective area epitaxy of ultra-high density InGaN quantum dots by diblock copolymer lithography

Highly uniform InGaN-based quantum dots (QDs) grown on a nanopatterned dielectric layer defined by self-assembled diblock copolymer were performed by metal-organic chemical vapor deposition. The cylindrical-shaped nanopatterns were created on SiNx layers deposited on a GaN template, which provided the nanopatterning for the epitaxy of ultra-high density QD with uniform size and distribution. Scanning electron microscopy and atomic force microscopy measurements were conducted to investigate the QDs morphology. The InGaN/GaN QDs with density up to 8 × 1010 cm-2 are realized, which represents ultra-high dot density for highly uniform and well-controlled, nitride-based QDs, with QD diameter of approximately 22-25 nm. The photoluminescence (PL) studies indicated the importance of NH3 annealing and GaN spacer layer growth for improving the PL intensity of the SiNx-treated GaN surface, to achieve high optical-quality QDs applicable for photonics devices