370 research outputs found
A Study on Secret Key Rate in Wideband Rice Channel
Standard cryptography is expected to poorly fit IoT applications and services, as IoT devices can hardly cope with the computational complexity often required to run encryption algorithms. In this framework, physical layer security is often claimed as an effective solution to enforce secrecy in IoT systems. It relies on wireless channel characteristics to provide a mechanism for secure communications, with or even without cryptography. Among the different possibilities, an interesting solution aims at exploiting the random-like nature of the wireless channel to let the legitimate users agree on a secret key, simultaneously limiting the eavesdropping threat thanks to the spatial decorrelation properties of the wireless channel. The actual reliability of the channel-based key generation process depends on several parameters, as the actual correlation between the channel samples gathered by the users and the noise always affecting the wireless communications. The sensitivity of the key generation process can be expressed by the secrecy key rate, which represents the maximum number of secret bits that can be achieved from each channel observation. In this work, the secrecy key rate value is computed by means of simulations carried out under different working conditions in order to investigate the impact of major channel parameters on the SKR values. In contrast to previous works, the secrecy key rate is computed under a line-of-sight wireless channel and considering different correlation levels between the legitimate users and the eavesdropper
Structuring and texturing gluten‑free pasta: egg albumen or whey proteins?
The effects of adding egg albumen or whey proteins to pasta made from parboiled rice flour (PR) were investigated. Pasta quality was evaluated in terms of color, furosine content, and cooking properties (water absorption, cooking loss, and consistency at the optimal cooking time). The surface heterogeneity of the cooked and uncooked materials was studied, and some starch properties (pasting properties and starch susceptibility to \u3b1-amylase hydrolysis) were assessed, along with the features of the protein network as determined by conditional solubility studies and with ultrastructural features of the cooked products. Egg albumen improved pasta appearance and gave a product with low cooking loss, firmer, and nutritionally more valuable than the other ones. In albumen-enriched pasta, small starch granules appear homogeneously surrounded by a protein network. In the uncooked product, the protein network is stabilized mostly by hydrophobic interactions, but additional disulfide interprotein bonds form upon cooking. Thus, addition of 15 % liquid albumen to PR results in significant improvement of the textural and structural features of rice-based gluten-free pasta
Polarization Effect on the Performance of On-Chip Wireless Optical Point-to-Point Links
Optical on-chip wireless interconnection is an emerging technology that aims to overcome the communication bottleneck in computing architectures and in which multiple processing units are exploited for data-intensive applications. In this work, we propose an integrated dielectric Vivaldi antenna, which exhibits the same gain performances for both TE and TM input polarizations. Point-to-point on-chip communication links between two Vivaldi antennas are analyzed. Moreover, the effect of wave polarization on the link performances is numerically studied in on-chip multilayer structures in connection with the multilayer characteristic parameters, i.e., cladding layer thickness and refractive index. The numerical results show that, with the same antenna gain, TM polarization is affected by lower propagation losses when suitable cladding layer thickness and refractive index are considered
A Multi-Frequency Investigation of Air-To-Ground Urban Propagation Using a GPU-based Ray Launching Algorithm
Unmanned Aerial Vehicles (UAV), also known as “drones”, are attracting increasing attention as enablers for many technical applications and services, and this trend is likely to continue in the next future. When compared to conventional terrestrial communications, those making use of UAVs as base- or relay-stations can definitely be more useful and flexible in reaction to specific events, like natural disasters and terrorist attacks. Among the many and different fields, UAV enabled communications emerge as one of the most promising solutions for next-generation mobile networks, with a special focus on the extension of coverage and capacity of mobile radio networks. Motivated by the air-to-ground (A2G) propagation conditions which are likely to be different than those experienced by traditional ground communication systems, this paper aims at investigating the narrowband properties of the air-to-ground channel for 5G communications and beyond by means of GPU accelerated ray launching simulations. Line of sight probability as well as path loss exponent and shadowing standard deviations are analysed for different UAV flight levels, frequencies and dense urban scenarios, and for different types of on board antennas. Thanks to the flexibility of the ray approach, the role played by the different electromagnetic interactions, namely reflection, diffraction and diffuse scattering, in the air-to-ground propagation process is also investigated. Computation time is reported as well to show that designing UAV communication networks and optimising their performances in a fast and reliable manner, might avoid exhausting – multiple - measurement campaigns
A Method for the Electromagnetic Characterization of Construction Materials Based on Fabry–Pérot Resonance
The determination of the complex permittivity of low-loss construction materials at frequency bands above 6 GHz that are being proposed to allocate forthcoming mobile radio services is of critical importance for the design and deployment of future wireless systems. In this paper, a simple free-space method for the electromagnetic characterization of construction materials that does not require multiple reflection or transmission coefficient measurements for different incidence angles or complex optimization procedures is proposed and tested. The method is shown to yield permittivity and conductivity values in agreement with the literature for some common-use materials using a relatively simple measurement setup and procedure
A Study on mm-Wave Propagation In and Around Buildings
mm-waves are envisaged as a key enabler for 5G and 6G wireless communications, thanks to the wide bandwidth and to the possibility of implementing large-scale antenna arrays and advanced transmission techniques, such as massive MIMO and beamforming, that can take advantage of the multidimensional properties of the wireless channel. In order to analyze in depth the peculiar characteristics of mm-wave propagation, joint measurement and simulation campaigns in indoor and outdoor microcellular environments have been carried out. The investigation highlights that the assumption that mm-wave NLoS connectivity is hardly feasible is not necessarily true as significant reflections, scattering and even transmission mechanisms can provide good NLoS coverage in the considered indoor and outdoor scenarios. This is also reflected in the limited angle-spread differences between LoS and NLoS locations in some cases. Finally, the contribution of different propagation mechanisms (reflection, diffraction, scattering and combination of them) to the received signal is analyzed in the paper with the help of ray tracing simulations. These outcomes can be helpful to predict the performance of mm-wave wireless systems and for the development of deterministic and geometric-stochastic mm-wave channel models
Stabilization of the "open" conformer of apoIscU on the surface of polystyrene nanobeads accelerates assembly of a 2Fe2S structure
AbstractThe scaffold protein IscU is involved in the assembly/transfer of FeS clusters. IscU exists in both open and closed conformation. The clusterless open conformation of IscU adheres to the hydrophobic surface of polystyrene nanobeads, as observed for other proteins. Increased accessibility of the ligand cysteines in bound IscU facilitates assembly of a 2Fe2S cluster, and the cluster-bearing structured form of IscU does not interact with the nanobeads, thus ensuring turnover. The dependence of accelerated cluster assembly on the nanobeads concentration pointed to steric and crowding effects as for promoting cluster formation, and confirms the requirement for structural flexibility of IscU
Stabilization of the “open” conformer of apoIscU on the surface of polystyrene nanobeads accelerates assembly of a 2Fe2S structure
The scaffold protein IscU is involved in the assembly/transfer of FeS clusters. IscU exists in both open and closed conformation. The clusterless open conformation of IscU adheres to the hydrophobic surface of polystyrene nanobeads, as observed for other proteins. Increased accessibility of the ligand cysteines in bound IscU facilitates assembly of a 2Fe2S cluster, and the cluster-bearing structured form of IscU does not interact with the nanobeads, thus ensuring turnover. The dependence of accelerated cluster assembly on the nanobeads concentration pointed to steric and crowding effects as for promoting cluster formation, and confirms the requirement for structural flexibility of IscU
Multi-level analysis of on-chip optical wireless links
Networks-on-chip are being regarded as a promising solution to meet the on-going requirement for higher and higher computation capacity. In view of future kilo-cores architectures, electrical wired connections are likely to become inefficient and alternative technologies are being widely investigated. Wireless communications on chip may be therefore leveraged to overcome the bottleneck of physical interconnections. This work deals with wireless networks-on-chip at optical frequencies, which can simplify the network layout and reduce the communication latency, easing the antenna on-chip integration process at the same time. On the other end, optical wireless communication on-chip can be limited by the heavy propagation losses and the possible cross-link interference. Assessment of the optical wireless network in terms of bit error probability and maximum communication range is here investigated through a multi-level approach. Manifold aspects, concurring to the final system performance, are simultaneously taken into account, like the antenna radiation properties, the data-rate of the core-to core communication, the geometrical and electromagnetic layout of the chip and the noise and interference level. Simulations results suggest that communication up to some hundreds of \u3bcm can be pursued provided that the antenna design and/or the target data-rate are carefully tailored to the actual layout of the chip
Multi-level analysis of on-chip optical wireless links
Networks-on-chip are being regarded as a promising solution to meet the on-going requirement for higher and higher computation capacity. In view of future kilo-cores architectures, electrical wired connections are likely to become inefficient and alternative technologies are being widely investigated. Wireless communications on chip may be therefore leveraged to overcome the bottleneck of physical interconnections. This work deals with wireless networks-on-chip at optical frequencies, which can simplify the network layout and reduce the communication latency, easing the antenna on-chip integration process at the same time. On the other end, optical wireless communication on-chip can be limited by the heavy propagation losses and the possible cross-link interference. Assessment of the optical wireless network in terms of bit error probability and maximum communication range is here investigated through a multi-level approach. Manifold aspects, concurring to the final system performance, are simultaneously taken into account, like the antenna radiation properties, the data-rate of the core-to core communication, the geometrical and electromagnetic layout of the chip and the noise and interference level. Simulations results suggest that communication up to some hundreds of ÎĽm can be pursued provided that the antenna design and/or the target data-rate are carefully tailored to the actual layout of the chip
- …