Sustained exocytosis after action potential-like stimulation at low frequencies in mouse chromaffin cells depends on a dynamin-dependent fast endocytotic process

Under basal conditions the action potential firing rate of adrenal chromaffin cells is lower than 0.5 Hz. The maintenance of the secretory response at such frequencies requires a continuous replenishment of releasable vesicles. However, the mechanism that allows such vesicle replenishment remains unclear. Here, using membrane capacitance measurements on mouse chromaffin cells, we studied the mechanism of replenishment of a group of vesicles released by a single action potential-like stimulus (APls). The exocytosis triggered by APls (ETAP) represents a fraction (40%) of the immediately releasable pool, a group of vesicles highly coupled to voltage dependent calcium channels. ETAP was replenished with a time constant of 0.73 � 0.11 s, fast enough to maintain synchronous exocytosis at 0.2-0.5 Hz stimulation. Regarding the mechanism involved in rapid ETAP replenishment, we found that it depends on the ready releasable pool; indeed depletion of this vesicle pool significantly delays ETAP replenishment. On the other hand, ETAP replenishment also correlates with a dynamin-dependent fast endocytosis process (τ = 0.53 � 0.01 s). In this regard, disruption of dynamin function markedly inhibits the fast endocytosis and delays ETAP replenishment, but also significantly decreases the synchronous exocytosis during repetitive APls stimulation at low frequencies (0.2 and 0.5 Hz). Considering these findings, we propose a model in where both the transfer of vesicles from ready releasable pool and fast endocytosis allow rapid ETAP replenishment during low stimulation frequencies.Fil: Moya Diaz, José Abelino. Universidad de Buenos Aires. Facultad de Ciencias Exactas. Departamento de Ecología, Genética y Evolución. Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; ArgentinaFil: Alvarez, Yanina Daniela. Universidad de Buenos Aires. Facultad de Ciencias Exactas. Departamento de Ecología, Genética y Evolución. Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; ArgentinaFil: Montenegro, Mauricio Norman. Universidad de Buenos Aires. Facultad de Ciencias Exactas. Departamento de Ecología, Genética y Evolución. Buenos Aires; ArgentinaFil: Bayonés, Lucas. Universidad de Buenos Aires. Facultad de Ciencias Exactas. Departamento de Ecología, Genética y Evolución. Buenos Aires; ArgentinaFil: Belingheri, Ana Verónica. Universidad de Buenos Aires. Facultad de Ciencias Exactas. Departamento de Ecología, Genética y Evolución. Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; ArgentinaFil: González-Jamett, Arlek M.. Universidad de Valparaiso; ChileFil: Cárdenas, Ana M.. Universidad de Valparaiso; ChileFil: Marengo, Fernando Diego. Universidad de Buenos Aires. Facultad de Ciencias Exactas. Departamento de Ecología, Genética y Evolución. Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; Argentin

Orientation of propagating crack paths emanating from fretting-fatigue contact problems

[EN] In this work, the orientation and propagation of cracks in fretting fatigue problems is analyzed numerically using the finite element method (FEM) and the extended finite element method (X- FEM). The analysis is performed by means of a 2D model of a complete-contact fretting problem, consisting of two square indenters pressed onto a specimen subjected to cyclic fatigue. For the simulation, we allow for crack face contact in the implementation during the corresponding parts of the fatigue cycle. The problem is highly nonlinear and non-proportional and we make use of the so-called minimum shear stress range orientation criterion, min(Delta tau), proposed by the authors in previous works. This criterion is introduced to predict the crack path in each step of the crack growth simulation. The objective of the work is to detect which is the relevant parameter affecting the crack path orientation. A parametric study of some a priori relevant magnitudes is carried out, such as normal load on the indenters, bulk load on the specimen, stress ratio and relative stiffness of the indenter and specimen materials. Contrary to previous expectations, it is shown that the relative magnitude of the applied loads has no significant effect. However, it is found that the stiffness of the indenter material with respect to the specimen material has the greatest effect. A simple explanation of this behavior is also provided.The authors gratefully acknowledge the financial support given by the SGPI of the Spanish Ministry of Economy and Competitiveness (Project DPI2013-46641-R).Giner Maravilla, E.; Diaz-Alvarez, J.; Marco Esteban, M.; Miguélez, MH. (2016). Orientation of propagating crack paths emanating from fretting-fatigue contact problems. Frattura e Integrità Strutturale. Fracture and Structural Integrity. (35):417-426. https://doi.org/10.3221/IGF-ESIS.35.33S4174263

Location of laccase in ordered mesoporous materials

The functionalization with amine groups was developed on the SBA-15, and its effect in the laccase immobilization was compared with that of a Periodic Mesoporous Aminosilica. A method to encapsulate the laccase in situ has now been developed. In this work, spherical aberration (Cs) corrected scanning transmission electron microscopy combined with high angle annular dark field detector and electron energy loss spectroscopy were applied to identify the exact location of the enzyme in the matrix formed by the ordered mesoporous solids

Discovery of a wide companion near the deuterium burning mass limit in the Upper Scorpius association

We present the discovery of a companion near the deuterium burning mass limit located at a very wide distance, at an angular separation of 4.6+/-0.1 arcsec (projected distance of ~ 670 AU) from UScoCTIO108, a brown dwarf of the very young Upper Scorpius association. Optical and near-infrared photometry and spectroscopy confirm the cool nature of both objects, with spectral types of M7 and M9.5, respectively, and that they are bona fide members of the association, showing low gravity and features of youth. Their masses, estimated from the comparison of their bolometric luminosities and theoretical models for the age range of the association, are 60+/-20 and 14^{+2}_{-8} MJup, respectively. The existence of this object around a brown dwarf at this wide orbit suggests that the companion is unlikely to have formed in a disk based on current planet formation models. Because this system is rather weakly bound, they did not probably form through dynamical ejection of stellar embryos.Comment: 10 pages, including 4 figures and 2 table

The segmentation of the Canarian tourism market with regared to expenditure: an empirical study of La Palma

In the context of the European Union countries, the Canary Islands have presented and continue to do so, unquestionable comparative and competitive advantages as supplier of tourism products that have lead to, driven more by managerial initiative and foreign capital than by the desire and initiative of the local population, a truly monocultural tourism production. The strong expansion of the services sector that tourism development has produced in parallel constitutes a logical consequence of an activity such as tourism characterised to be basic (Begg, 1993), that is to say, to present very strong effects on other economic activities. It is in fact the economic importance of tourism in the Canary Islands that has lead local authorities to consider the maintenance and improvement of competitiveness levels in tourism in the field of the domestic and international market (Government of Canaries, 1998). The maintenance and improvement of competitiveness levels depend on the segmentation of tourism supply as means of responding to, on one hand, greater competition in prices in the tourist markets of homogeneous products, especially in the sector of sun and beach, and on the other hand, the appearance of an increasing demand for more customised services, where the tourist outlines his/her leisure time requirements in an individual way which ultimately changes the essence of the homogeneous tourist package that the tour-operator has traditionally offered. In this paper we use, therefore, a focus on the segmented markets in which a range of tourism products exists, each one of which satisfies, to greater or lesser extent, the needs of a segment of demand. We have two objectives, firstly, to identify those segments of current demand acquired at destination and, secondly, to determine, amongst them the niches associated with greater expense, in order to profile lines of a regional policy of innovation in products that it embraces them and generates greater levels of local development. Thus we will analyse several sources of data. On the one hand, data which comes from the Survey of Tourist Expenditure carried out by the Institute of Statistics of the Canary Islands and on the other, information obtained in an empirical study carried out over the last few years and referring especially to the island of La Palma. Specifically, we will establish two expenditure segments: lower and middle, to thus determine the characteristics that identify tourists included in the bracket of highest expenditure at destination

Mid-infrared imaging- and spectro-polarimetric subarcsecond observations of NGC 1068

We present sub-arcsecond 7.5$-$13 $\mu$m imaging- and spectro-polarimetric observations of NGC 1068 using CanariCam on the 10.4-m Gran Telescopio CANARIAS. At all wavelengths, we find: (1) A 90 $\times$ 60 pc extended polarized feature in the northern ionization cone, with a uniform $\sim$44$^{\circ}$ polarization angle. Its polarization arises from dust and gas emission in the ionization cone, heated by the active nucleus and jet, and further extinguished by aligned dust grains in the host galaxy. The polarization spectrum of the jet-molecular cloud interaction at $\sim$24 pc from the core is highly polarized, and does not show a silicate feature, suggesting that the dust grains are different from those in the interstellar medium. (2) A southern polarized feature at $\sim$9.6 pc from the core. Its polarization arises from a dust emission component extinguished by a large concentration of dust in the galaxy disc. We cannot distinguish between dust emission from magnetically aligned dust grains directly heated by the jet close to the core, and aligned dust grains in the dusty obscuring material surrounding the central engine. Silicate-like grains reproduce the polarized dust emission in this feature, suggesting different dust compositions in both ionization cones. (3) An upper limit of polarization degree of 0.3 per cent in the core. Based on our polarization model, the expected polarization of the obscuring dusty material is $\lesssim$0.1 per cent in the 8$-$13 $\mu$m wavelength range. This low polarization may be arising from the passage of radiation through aligned dust grains in the shielded edges of the clumps.Comment: 17 pages, 10 figures, accepted for publication at MNRA

Testing postcombustion CO2 capture with CaO in a 1.7 MWt pilot facility

AbstractCalcium looping, CaL, is a new and rapidly developing technology that makes use of CaO as a high temperature regenerable sorbent of CO2. Previous theoretical and lab scale studies have shown that this technology could lead to a substantial reduction in the cost of CO2 capture and energy penalties because heat can be effectively recovered from this high temperature solid looping system. We report in this paper on the first results from a pilot plant designed to demonstrate the viability of postcombustion capture of CO2 using CaL under conditions comparable to those expected in a large scale plant. The pilot includes two interconnected circulating fluidized bed reactors of 15 m height: a CO2 absorber (carbonator) able to treat up to 2400kg/h (equivalent to about 1.7 MWth), and an oxy-fired CFB calciner with a firing power between 1-3 MWth. CO2 capture efficiencies over 90% have been experimentally observed, including continuous operation with highly cycled solids in the system (i.e. with modest CO2 carrying capacities). SO2 capture is shown to be extremely high, with concentrations of SO2 well below 10 ppmv at the exit of the carbonator. Closure of carbon and sulfur balances is satisfactory. These results should be valuable base for model validation and scaling up purposes in future stages of the EU FP7 “CaOling” project, under which this investigation has been carried out