2,994 research outputs found
A 10-way power divider based on a transducer and a radial junction operating in the circular TM01 mode
This work presents a 10-way Ku-band power divider using a mode transducer and a radial junction connected by an overmoded circular waveguide operating in the TM 01 mode. The circular symmetry of this mode has been exploited to obtain a power divider with the rectangular output ports radially distributed along the broad wall of the waveguides in H-plane configuration. This topology provides the same amplitude and phase for all the output ports. At the same time, a compact profile has been obtained, introducing a simple manufacturing for the two components of the divider. The first component is a mode transducer converting the TE 10 mode in the rectangular waveguide to the TM 01 mode in the circular waveguide. It is based on a novel topology providing a very high purity in the mode conversion with an attenuation for the other propagating mode, the TE 11c , higher than 60 dB. The second component is a 10-way radial junction that must work under the excitation of the TM 01 , whose special features, since this mode is not the fundamental one of the circular waveguide, will be highlighted. The final design has been validated with an experimental prototype, proposing a manufacturing based on four simple parts. This has been the key to obtain an experimental prototype with specifications in the state-of-the-art. The measured efficiency is better than 96.5% in a 16.7% relative frequency bandwidth from 11 GHz to 13 GHz, with return losses better than 25 dB in the common port. The measured difference between the signals at the output ports of the prototype is ±0.3 dB for the amplitudes and ±0.45° for the phases. A comparison of the obtained results with another divider based on the TE 01 mode shows the potential of the presented design for becoming an alternative to the more extended TE 01 -based power dividersThis work was supported by the Spanish Government through the Agencia Estatal de Investigacion, Fondo Europeo de Desarrollo Regional
(AEI/FEDER, UE), under Grant TEC2016-76070-C3-1/2-R (ADDMATE
Impact of Power Allocation and Antenna Directivity in the Capacity of a Multiuser Cognitive Ad Hoc Network
This paper studies the benefits that power control and antenna directivity can bring to the capacity of a multiuser cognitive radio network. The main objective is to optimize the secondary network sum rate under the capacity constraint of the primary network. Exploiting location awareness, antenna directivity, and the power control capability, the cognitive radio ad hoc network can broaden its coverage and improve capacity. Computer simulations show that by employing the proposed method the system performance is significantly enhanced compared to conventional fixed power allocation
Effect of Location Accuracy and Shadowing on the Probability of Non-Interfering Concurrent Transmissions in Cognitive Ad Hoc Networks
Cognitive radio ad hoc systems can coexist with a primary network in a scanning-free region, which can be dimensioned by location awareness. This coexistence of networks improves system throughput and increases the efficiency of radio spectrum utilization. However, the location accuracy of real positioning systems affects the right dimensioning of the concurrent transmission region. Moreover, an ad hoc connection may not be able to coexist with the primary link due to the shadowing effect. In this paper we investigate the impact of location accuracy on the concurrent transmission probability and analyze the reliability of concurrent transmissions when shadowing is taken into account. A new analytical model is proposed, which allows to estimate the resulting secure region when the localization uncertainty range is known. Computer simulations show the dependency between the location accuracy and the performance of the proposed topology, as well as the reliability of the resulting secure region
Development of a high-performance W-band duplexer for plasma diagnosis using a single band with dual circular polarization
Discrepancia entre la información que aparece en el artículo que indica que el copyright es de Elsevier, y la información que aparece en la página de la revista y en el Copyright Clearance Center que indican © 2019 The Authors. Published by Elsevier B.V., así como que el artículo está publicado en Open Access under a Creative Commons licenceThis work presents the design and experimental validation of a high performance, compact, waveguide duplexer operating from 91.5 to 96.5 GHz for its integration in diverse W-band microwave equipment as in plasma diagnosis applications. It uses a single frequency band, with two signals discriminated by different orthogonal circular polarization, which is generated by means of a septum orthomode transducer (OMT) polarizer. Moreover, this component is optimized loaded with the horn antenna for improving the overall system performance. It is explained how these two components are integrated into a very compact duplexer, designed using efficient numerical algorithms. The manufacturing process by mean of high precision milling, and including electrical discharge machining (EDM) has led to excellent performances. The measured return loss level and isolation are higher than 30 dB, and the insertion loss level is below 0.3 dB. Finally, the key parameter in this device, which reflects the symmetry in the manufacturing process, i.e., the axial ratio, is lower than 0.6 dB for both polarizations, an excellent result showing the potential of the presented designThis work was supported by the Spanish government under grants (ADDMATE) TEC2016-76070-C3-1/2-R (Agencia Estatal de Investigación, Spain, Fondo Europeo de Desarrollo Regional: AEI/FEDER/UE) and the program of Comunidad de Madrid, Spain S2013/ICE-3000 (SPADERADARCM
High-performance 16-way Ku-band radial power combiner based on the TE01-circular waveguide mode
This work presents a 16-way Ku-band radial power combiner for high power and high frequency
applications, using the very low loss TE01 circular waveguide mode. The accomplished design shows
an excellent performance: the experimental prototype has a return loss better than 30 dB, with a balance
for the amplitudes of ( 0.15 dB) and ( 2.5 ) for the phases, in a 16.7% fractional bandwidth (2 GHz
centered at 12 GHz). For obtaining these outstanding specifications, required, for instance, in highfrequency
amplification or on plasma systems, a rigorous step-by-step procedure is presented. First, a
high-purity mode transducer has been designed, from the TE10 mode in the rectangular waveguide to
the TE01 mode in the circularwaveguide, with very high attenuation (>50 dB) for the other propagating
and evanescent modes in the circularwaveguide. This transducer has been manufactured and measured
in a back-to-back configuration, validating the design process. Second, an E-plane 16-way radial
power divider has been designed, where the power is coupled from the 16 non-reduced-height radial
standardwaveguides into the TE01 circularwaveguide mode, improving the insertion loss response and
removing the usual tapered transformers of previous designs limiting the power handling. Finally, both
the transducer and the divider have been assembled to make the final radial combiner. The prototype
has been carefully manufactured, showing very good agreement between the measurements and the
full-wave simulationsThe authors would like to thank INMEPRE S.A., the diligence
in the manufacturing process. This work was supported
by the Spanish government under Grant (ADDMATE) No.
TEC2016-76070-C3-1/2-R (AEI/FEDER/UE) and the program
of Comunidad de Madrid S2013/ICE-3000 (SPADERADARCM
Force dipoles and stable local defects on fluid vesicles
An exact description is provided of an almost spherical fluid vesicle with a
fixed area and a fixed enclosed volume locally deformed by external normal
forces bringing two nearby points on the surface together symmetrically. The
conformal invariance of the two-dimensional bending energy is used to identify
the distribution of energy as well as the stress established in the vesicle.
While these states are local minima of the energy, this energy is degenerate;
there is a zero mode in the energy fluctuation spectrum, associated with area
and volume preserving conformal transformations, which breaks the symmetry
between the two points. The volume constraint fixes the distance , measured
along the surface, between the two points; if it is relaxed, a second zero mode
appears, reflecting the independence of the energy on ; in the absence of
this constraint a pathway opens for the membrane to slip out of the defect.
Logarithmic curvature singularities in the surface geometry at the points of
contact signal the presence of external forces. The magnitude of these forces
varies inversely with and so diverges as the points merge; the
corresponding torques vanish in these defects. The geometry behaves near each
of the singularities as a biharmonic monopole, in the region between them as a
surface of constant mean curvature, and in distant regions as a biharmonic
quadrupole. Comparison of the distribution of stress with the quadratic
approximation in the height functions points to shortcomings of the latter
representation. Radial tension is accompanied by lateral compression, both near
the singularities and far away, with a crossover from tension to compression
occurring in the region between them.Comment: 26 pages, 10 figure
Design of Radial Power Combiners Based on TE 01 Circular Waveguide Mode
Modern microwave and millimeter-wave systems require high-power amplifiers in very diverse fields such as communications or plasma physics. Although amplification technology has significantly evolved in the last decades, a single module is not enough for achieving the required power level. The solution in this case is the combination of several individual modules with power combiners. In this chapter, this concept is shown with two E-plane radial power combiners, both carrying a high-power signal with the circular waveguide TE01 mode. The first design is a 16-way Ku-band combiner with an excellent experimental performance: return loss better than 30 dB, with a balance for the amplitudes of ±0.15 dB and ±2.5o for the phases, in a 16.7% fractional bandwidth (2 GHz centered at 12 GHz), and efficiency better than 95% in this band. The second design is a 5-way W-band combiner, showing excellent characteristics as well: the experimental prototype has a return loss better than 20 dB, with a balance for the amplitudes of ±0.4 dB and ±3.5o for the phases, in a 12.8% fractional bandwidth (12 GHz centered at 94 GHz), and efficiency better than 85% in this whole band. The experimental results obtained in both designs are the state of the art in the area of radial power combiners
- …