The effect of changing mediolateral center of pressure on rearfoot eversion during treadmill running

INTRODUCTION: Atypical rearfoot eversion is an important kinematic risk factor in running-related injuries. Prominent interventions for atypical rearfoot eversion include foot orthoses, footwear, and taping, yet a running gait retraining is lacking. Therefore, the aim was to investigate the effects of changing mediolateral center of pressure (COP) on rearfoot eversion, subtalar pronation, medial longitudinal arch angle (MLAA), hip kinematics and vertical ground reaction force (vGRF). METHODS: Fifteen healthy female runners underwent gait retraining under three conditions. Participants were instructed to run normally, on the lateral (COP lateral) and medial (COP medial) side of the foot. Foot progression angle (FPA) was controlled using real-time visual feedback. 3D measurements of rearfoot eversion, subtalar pronation, MLAA, FPA, hip kinematics, vGRF and COP were analyzed. A repeated-measures ANOVA followed by pairwise comparisons was used to analyze changes in outcome between three conditions. Data were also analyzed using statistic parameter mapping. RESULTS: Running on the lateral side of the foot compared to normal running and running on the medial side of the foot reduced peak rearfoot eversion (mean difference (MD) with normal 3.3°, p < 0.001, MD with COP medial 6°, p < 0.001), peak pronation (MD with normal 5°, p < 0.001, MD with COP medial 9.6°, p=<0.001), peak MLAA (MD with normal 2.3°, p < 0.001, MD with COP medial 4.1°, p < 0.001), peak hip internal rotation (MD with normal 1.8°, p < 0.001), and peak hip adduction (MD with normal running 1°, p = 0.011). Running on the medial side of the foot significantly increased peak rearfoot eversion, pronation and MLAA compared to normal running. SIGNIFICANCE: This study demonstrated that COP translation along the mediolateral foot axis significantly influences rearfoot eversion, MLAA, and subtalar pronation during running. Running with either more lateral or medial COP reduced or increased peak rearfoot eversion, peak subtalar pronation, and peak MLAA, respectively, compared to normal running. These results might use as a basis to help clinicians and researchers prescribe running gait retraining by changing mediolateral COP for runners with atypical rearfoot eversion or MLAA

The effect of changing foot progression angle using real-time visual feedback on rearfoot eversion during running

Atypical rearfoot in/eversion may be an important risk factor for running-related injuries. Prominent interventions for atypical rearfoot eversion include foot orthoses, footwear, and taping but a modification derived from gait retraining to correct atypical rearfoot in/eversion is lacking. We aimed to investigate changes in rearfoot in/eversion, subtalar pronation, medial longitudinal arch angle, and selected lower limb joint biomechanics while performing toe-in/toe-out running using real-time visual feedback. Fifteen female runners participated in this study. Subjects performed toe-in/toe-out running using real-time visual feedback on foot progression angle, which was set ±5° from habitual foot progression angle. 3D kinematics of rearfoot in/eversion, subtalar supination/pronation, medial longitudinal arch angle, foot progression angle, hip flexion, ab/adduction and internal/external rotation, knee flexion, ankle dorsiflexion, and ankle power were analyzed. A repeated-measures ANOVA followed by pairwise comparisons was used to analyze changes between three conditions. Toe-in running compared to normal and toe-out running reduced peak rearfoot eversion (mean difference (MD) with normal = 2.1°; p<0.001, MD with toe-out = 3.5°; p<0.001), peak pronation (MD with normal = -2.0°; p<0.001, MD with toe-out = -3.4; p = <0.001), and peak medial longitudinal arch angle (MD with normal = -0.7°; p = 0.022, MD with toe-out = -0.9; p = 0.005). Toe-out running significantly increased these kinematic factors compared to normal and toe-in running. Toe-in running compared to normal running increased peak hip internal rotation (MD = 2.3; p<0.001), and reduced peak knee flexion (MD = 1.3; p = 0.014). Toe-out running compared to normal running reduced peak hip internal rotation (MD = 2.5; p<0.001), peak hip ab/adduction (MD = 2.5; p<0.001), peak knee flexion (MD = 1.5; p = 0.003), peak ankle dorsiflexion (MD = 1.6; p<0.001), and peak ankle power (MD = 1.3; p = 0.001). Runners were able to change their foot progression angle when receiving real-time visual feedback for foot progression angle. Toe-in/toe-out running altered rearfoot kinematics and medial longitudinal arch angle, therefore supporting the potential value of gait retraining focused on foot progression angle using real-time visual feedback when atypical rearfoot in/eversion needs to be modified. It should be considered that changes in foot progression angle when running is accompanied by changes in lower limb joint biomechanics

Effects of Longitudinal Bending Stiffness of forefoot rocker profile shoes on ankle kinematics and kinetics

INTRODUCTION: Rocker profile shoes with a proximally placed apex are currently one of the most prescribed shoe modifications for treatment and prevention of lower leg deficits. Three geometrical rocker design parameters apex position (AP), apex angle (AA) and rocker radius (RR) influence both plantar pressure redistribution and kinetic and kinematic alterations of the lower leg. In addition, longitudinal bending stiffness (LBS) of the outsole influences these parameters as well. This study aims to investigate the effects of the LBS in combination with different forefoot radii of rocker shoes on kinematics and kinetics of the lower limb. METHODS: 10 participants walked in standard shoes and six experimental shoe conditions with high and low LBS and three different forefoot rocker radii with the same (proximal) AP and AA. Lower extremity kinematics and kinetics were collected while walking on an instrumented treadmill at preferred walking speed and analysed with a repeated measures ANOVA and Statistical Parametric Mapping (SPM) (α = .05; post hoc α = .05/6). RESULTS: SPM analyses revealed no significant differences for LBS and interaction LBS*RR for most research variables in terminal stance (ankle angle, ankle moment, ankle power, foot-to-horizontal angle, shank-to-vertical angle, external ankle moment, ground reaction force angle). A significant LBS effect was found for anterior-posterior position of the centre of pressure during pre-swing and peak ankle dorsiflexion angle. No relevant significant differences were found in spatio-temporal parameters and total work at the ankle between low and high LBS. CONCLUSION: This study showed that longitudinal bending stiffness does not affect the biomechanical working mechanism of rocker profile shoes as long as toe plantarflexion is restricted. Providing that the forefoot rocker radius supports at least a normal foot-to-horizontal angle at toe-off, there is no reason to increase sole stiffness to change ankle kinematics and kinetics

Effects of rocker radii with two longitudinal bending stiffnesses on plantar pressure distribution in the forefoot

INTRODUCTION: Outsole parameters of the shoe can be adapted to offload regions of pain or region of high pressures. Previous studies already showed reduced plantar pressures in the forefoot due to a proximally placed apex position and higher longitudinal bending stiffness (LBS). The aim of this study was to determine the effect of changes in rocker radii and high LBS on the plantar pressure profile during gait. METHOD: 10 participants walked in seven shoe conditions of which one control shoe and six rocker shoes with small, medium and large rocker radii and low and high longitudinal bending stiffness. Pedar in-shoe plantar pressure measuring system was used to quantify plantar pressures while walking on a treadmill at self-selected walking speed. Peak plantar pressure, maximum mean pressure and force-time integral were analyzed with Generalized Estimated Equation (GEE) and Tukey post hoc correction (α = .05). RESULTS: Significantly lower plantar pressures were found in the first toe, toes 2-5, distal and proximal forefoot in all rocker shoe conditions as compared to the control shoe. Plantar pressures in the first toe and toes 2-5 were significantly lower in the small radius compared to medium and large radii. For the distal forefoot both small and medium radii significantly reduced plantar pressure compared to large radii. Low LBS reduced plantar pressure at the first toe significantly compared to high LBS independent of the rocker radius. Plantar pressures in the distal forefoot and toes 2-5 were lower in high LBS compared to low LBS. CONCLUSION: Manipulation of the rocker radius and LBS can effectively reduce peak plantar pressures in the forefoot region during gait. In line with previous studies, we showed that depending on the exact target location for offloading, different combinations of rocker radius and LBS need to be adopted to maximize treatment effects

Biomechanical effects of rocker shoes on plantar aponeurosis strain in patients with plantar fasciitis and healthy controls

Plantar fasciitis is a frequently occurring overuse injury of the foot. Shoes with a stiff rocker profile are a commonly prescribed treatment modality used to alleviate complaints associated with plantar fasciitis. In rocker shoes the apex position was moved proximally as compared to normal shoes, limiting the progression of the ground reaction forces (GRF) and peak plantarflexion moments during gait. A stiff sole minimizes dorsiflexion of the toes. The aim of this study was to investigate whether the biomechanical effects of rocker shoes lead to minimization of plantar aponeurosis (PA) strain during gait in patients with plantar fasciitis and in healthy young adults. 8 patients with plantar fasciitis (1 male, 7 females; mean age 55.0 ± 8.4 years) and 8 healthy young adults (8 females; mean age 24.1 ± 1.6 years) participated in the study. Each participant walked for 1 minute on an instrumented treadmill while wearing consecutively in random order shoes with a normal apex position (61.2 ± 2.8% apex) with flexible insole (FN), normal apex position with stiff insole (SN), proximal apex position (56.1 ± 2.6% apex) with flexible insole (FR) and proximal apex position with stiff insole (SR). Marker position data of the foot and lower leg and GRF were recorded. An OpenSim foot model was used to compute the change in PA length based on changes in foot segment positions during gait. The changes in PA length due to increases in Achilles tendon forces were computed based on previous data of a cadaver study. PA strain computed from both methods was not statistically different between shoe conditions. Peak Achilles tendon force, peak first metatarsophalangeal (MTP1) joint angle and peak plantarflexion moment were significantly lower when walking with the rocker shoe with a proximal apex position and a stiff insole for all subjects (p<.05). Changes in Achilles tendon forces during gait accounted for 65 ± 2% of the total PA strain. Rocker shoes with a stiff insole reduce peak dorsiflexion angles of the toes and plantar flexion moments, but not PA strain because the effects of a proximal apex position and stiff insole do not occur at the same time, but independently affect PA strain at 80-90% and 90-100% of the stance phase. Rocker shoes with an apex position of ~56% are insufficient to significantly reduce peak PA strain values in patients with plantar fasciitis and healthy young adults

A novel class of microRNA-recognition elements that function only within open reading frames.

MicroRNAs (miRNAs) are well known to target 3' untranslated regions (3' UTRs) in mRNAs, thereby silencing gene expression at the post-transcriptional level. Multiple reports have also indicated the ability of miRNAs to target protein-coding sequences (CDS); however, miRNAs have been generally believed to function through similar mechanisms regardless of the locations of their sites of action. Here, we report a class of miRNA-recognition elements (MREs) that function exclusively in CDS regions. Through functional and mechanistic characterization of these 'unusual' MREs, we demonstrate that CDS-targeted miRNAs require extensive base-pairing at the 3' side rather than the 5' seed; cause gene silencing in an Argonaute-dependent but GW182-independent manner; and repress translation by inducing transient ribosome stalling instead of mRNA destabilization. These findings reveal distinct mechanisms and functional consequences of miRNAs that target CDS versus the 3' UTR and suggest that CDS-targeted miRNAs may use a translational quality-control-related mechanism to regulate translation in mammalian cells

Gene expression profiling and histopathological characterization of triple-negative/basal-like breast carcinomas

INTRODUCTION: Breast cancer is a heterogeneous group of tumors, and can be subdivided on the basis of histopathological features, genetic alterations and gene-expression profiles. One well-defined subtype of breast cancer is characterized by a lack of HER2 gene amplification and estrogen and progesterone receptor expression ('triple-negative tumors'). We examined the histopathological and gene-expression profile of triple-negative tumors to define subgroups with specific characteristics, including risk of developing distant metastases. METHODS: 97 triple-negative tumors were selected from the fresh-frozen tissue bank of the Netherlands Cancer Institute, and gene-expression profiles were generated using 35K oligonucleotide microarrays. In addition, histopathological and immunohistochemical characterization was performed, and the findings were associated to clinical features. RESULTS : All triple-negative tumors were classified as basal-like tumors on the basis of their overall gene-expression profile. Hierarchical cluster analysis revealed five distinct subgroups of triple-negative breast cancers. Multivariable analysis showed that a large amount of lymphocytic infiltrate (HR = 0.30, 95% CI 0.09-0.96) and absence of central fibrosis in the tumors (HR = 0.14, 95% CI 0.03-0.62) were associated with distant metastasis-free survival. CONCLUSION: Triple-negative tumors are synonymous with basal-like tumors, and can be identified by immunohistochemistry. Based on gene-expression profiling, basal-like tumors are still heterogeneous and can be subdivided into at least five distinct subgroups. The development of distant metastasis in basal-like tumors is associated with the presence of central fibrosis and a small amount of lymphocytic infiltrat