Designing a Magnetic Measurement Data Acquisition and Control System with Reuse in Mind: A Rotating Coil System Example

Accelerator magnet test facilities frequently need to measure different magnets on differently equipped test stands and with different instrumentation. Designing a modular and highly reusable system that combines flexibility built-in at the architectural level as well as on the component level addresses this need. Specification of the backbone of the system, with the interfaces and dataflow for software components and core hardware modules, serves as a basis for building such a system. The design process and implementation of an extensible magnetic measurement data acquisition and control system are described, including techniques for maximizing the reuse of software. The discussion is supported by showing the application of this methodology to constructing two dissimilar systems for rotating coil measurements, both based on the same architecture and sharing core hardware modules and many software components. The first system is for production testing 10 m long cryo-assemblies containing two MQXFA quadrupole magnets for the high-luminosity upgrade of the Large Hadron Collider and the second for testing IQC conventional quadrupole magnets in support of the accelerator system at Fermilab

Spatial and temporal changes in cumulative human impacts on the world's ocean

Human pressures on the ocean are thought to be increasing globally, yet we know little about their patterns of cumulative change, which pressures are most responsible for change, and which places are experiencing the greatest increases. Managers and policymakers require such information to make strategic decisions and monitor progress towards management objectives. Here we calculate and map recent change over 5 years in cumulative impacts to marine ecosystems globally from fishing, climate change, and ocean- and land-based stressors. Nearly 66% of the ocean and 77% of national jurisdictions show increased human impact, driven mostly by climate change pressures. Five percent of the ocean is heavily impacted with increasing pressures, requiring management attention. Ten percent has very low impact with decreasing pressures. Our results provide large-scale guidance about where to prioritize management efforts and affirm the importance of addressing climate change to maintain and improve the condition of marine ecosystems

Assessment of Existing Steel Structures - Recommendations for Estimation of the Remaining Fatigue Life

Due to the demand for freight volume on rail and road, traffic has increased significantly in the past years leading to an increasing number of heavy vehicles in the traffic flows and greater exploitation of their loading capacities. Because of environmental considerations there is also a tendency to further enhance the admissible loads in the design of new heavy vehicles (e.g. by increasing axle loads or using road trains). This all may affect the safety, serviceability and durability of existing bridges. Bridge authorities are therefore interested in agreed methods to assess the safety and durability of existing bridges and to make appropriate provisions for more refined maintenance methods, possible restriction of traffic, bridge-rehabilitation or substitution of old bridges by new ones where necessary. For steel bridges including the old riveted ones there are numerous approaches to such assessments, partly standardized by national codes or recommendations. In the light of the development of the European single market for construction works and engineering services there is thus a need to harmonize them and to develop agreed European technical recommendations for the safety and durability assessment of existing structures. These recommendations should follow the principles and application rules in the Eurocodes and provide a scheme with different levels of analysis: a basic level with general methods and further levels with higher sophistication that call for specific expertise. This technical report on ¿Recommendations for the estimation of remaining fatigue life¿ supported by the ECCS could be used as a basis for harmonizing National procedures and for the further evolution of the Eurocodes.JRC.G.5-European laboratory for structural assessmen

Angiogenic Factors Stimulate Growth of Adult Neural Stem Cells

The ability to grow a uniform cell type from the adult central nervous system (CNS) is valuable for developing cell therapies and new strategies for drug discovery. The adult mammalian brain is a source of neural stem cells (NSC) found in both neurogenic and non-neurogenic zones but difficulties in culturing these hinders their use as research tools.Here we show that NSCs can be efficiently grown in adherent cell cultures when angiogenic signals are included in the medium. These signals include both anti-angiogenic factors (the soluble form of the Notch receptor ligand, Dll4) and pro-angiogenic factors (the Tie-2 receptor ligand, Angiopoietin 2). These treatments support the self renewal state of cultured NSCs and expression of the transcription factor Hes3, which also identifies the cancer stem cell population in human tumors. In an organotypic slice model, angiogenic factors maintain vascular structure and increase the density of dopamine neuron processes.We demonstrate new properties of adult NSCs and a method to generate efficient adult NSC cultures from various central nervous system areas. These findings will help establish cellular models relevant to cancer and regeneration

Poly(dimethylsiloxane)-Stabilized Polymer Particles from Radical Dispersion Polymerization in Nonpolar Solvent: Influence of Stabilizer Properties and Monomer Type

Particles used in electrophoretic display applications (EPD) must possess a number of specific properties ranging from stability in a nonaqueous solvent, high reflectivity, low polydispersity, and high charge density to name but a few. The manufacture of such particles is best carried out in the solvent of choice for the EPD. This opens up new interests in the study of nonaqueous dispersion polymerization methods, which deliver polymer particles suspended in low dielectric constant solvents. We explore in this article the use of a poly(dimethylsiloxane) macromonomer for the stabilization of poly(methyl methacrylate) polymer particles in dodecane, a typical solvent of choice for EPDs. The use of this stabilizer is significant for this method as it is directly soluble in the reaction medium as opposed to traditionally used poly(12-hydroxystearic acid)-based stabilizers. Additionally, the present study serves as a baseline for subsequent work, where nonaqueous dispersion polymerization will be used to create polymer particles encapsulating liquid droplets and solid pigment particles. In this article, the influence of the macromonomer molecular weight and concentration on the properties of the synthesized particles is studied. In addition, we investigate the possibility of synthesizing polymer particles from other monomers both as a comonomer for methyl methacrylate and as the only monomer in the process. The influence of macromonomer concentration is also studied throughout all experiments