14,775 research outputs found
Cholesterol and Malondialdehyde Contents of Broiler-Chicken Meat Supplemented with Indigofera Zolingeriana Top Leaf Meal
This research aimed to increase functional value of broiler-chicken meat containing high antioxidant and low cholesterol through substitution of soybean meal (SBM) with Indigofera zollingeriana top leaf meal (ILM). The experiment used 160 day old broiler chicken (Cobb strain). The experimental chicken were provided dietary treatments when they were 15-days old (initial body weight of 460.5±1.56 g/bird) and terminated on day 35. A completely randomized design (CRD) with four treatments and four replications and ten birds in each replication was used in this experiment. Dietary treatments were: R1= diet containing 20% soybean meal (SBM) without I. zollingeriana top leaf meal (ILM); R2= diet containing 16% SBM and 5.9% ILM; R3= diet containing 12% SBM and 11.8% ILM; R4= diet containing 8% SBM and 17.74% ILM. Variables measured were performances (feed consumption, body weight gain, and feed conversion) and the quality of broiler meat (cholesterol, fat content, and malondialdehyde [MDA] concentration). The results showed that supplementation of 17.74% ILM (R4) as the substitution of 60% soybean meal protein produced the same performances of broilers as those of control diet (R1). Supplementation of 11.8% ILM as the substitution of 40% soybean meal protein (R3) decreased meat cholesterol by 34.70%, meat fat content by 52.93%, and MDA concentration by 62.52%. The conclusion of this study was that supplementation of 17.74% ILM produced the same performances as that of control diet, increased antioxidant content of the meat, indicated by a lower MDA concentration, and decreased cholesterol, as well as fat content of broiler-chicken meat
Evaluasi Kinerja Kegiatan Perawatan Mesin Injection Mold Menggunakan Metode Total Productive Maintenance (Tpm) Pada PT Ichikoh Indonesia
Penelitian ini bertujuan untuk memberikan gambaran deskriptif mengenai perawatan mesin atau maintenance, meliputi Total Productive Maintenance, Overall Equipment Effectiveness, Overall Human Ineffectiveness dan Six Big Losses pada PT Ichikoh Indonesia. Permasalahan yang terjadi diperusahaan yaitu banyaknya jumlah part defect dikarenakan mesin sering breakdown. Pengumpulan data dilakukan dengan observasi dan wawancara terstruktur dengan Manager Departement Molding Upstream 1 dan Departement Maintenance. Data tersebut dianalisis menggunakan metode kuantitatif dan evaluatif dari periode bulan April 2016 sampai Maret 2017. Dari hasil analisis ini PT Ichikoh Indonesia memiliki nilai efektifitas mesin yang masih dibawah standar JIPM (Japan Institude of Plant Maintenance) yaitu dengan nilai tertinggi pada bulan Februari 74%, sedangkan standar JIPM (Japan Institude of Plant Maintenance) adalah minimal sebesar 85% yang dihitung menggunakan metode Overall Equipment Effectiveness. Sedangkan untuk pengukuran tingkat ketidakefektifan kerja operator yang dianalisis menggunakan metode Overall Human Ineffectiveness mendapatkan nilai yang masih besar pada bulan May 2016 yaitu sebesar 17%. Faktor yang menyebabkan rendahnya nilai efektifitas mesin dan tingkat ketidakefektifan kinerja operator adalah faktor Idling and Minor Stoppagges dengan nilai losses sebesar 54% yang sudah dianalisis menggunakan diagram pareto. Sesuai dengan diagram sebab-akibat (fishbone) didapat faktor-faktor yang menyebabkan terjadinya Idling and Minor Stoppagges yang menjadi prioritas utama adalah a). faktor manusia yaitu masih kurang disiplin, sering terjadi kesalahan dalam perbaikan mesin, b). faktor material yaitu kesalahan spesifikasi material dan rendahnya perawatan bahan baku, c). faktor mesin yaitu mesin sering breakdown, kesalahan setup, d). faktor metode yaitu penjadwalan pengganti komponen yang belum efektif dan autonomous maintenance kurang berjalan dengan baik, e). faktor lingkungan yaitu kebersihan mesin kurang
Habitat Conditions Malayan Porcupine (Hystrix Brachyura) in Captivity Deer Park Village Lamtanjong District of Aceh and Village Panton Luas South Aceh Regency
Malayan Porcupine is one of the protected wildlife in Indonesia. This animal has many benefits for humans. But the population continues to decline due to poaching. One way to save is with the conservation of these animals. Captive of Deer Park Village Lamtanjong is one conservation area in Aceh. This research was conducted in August until September 2016. The purpose of research was to determine the condition of the habitat Malayan Porcupine. The object of research is two tailed Malayan Porcupine, each of which is located in the village of Deer Park Breeding Lamtanjong Aceh Besar district and the village of Panton Luas South Aceh. Data about the condition of the habitat is done by direct measurements during the research. Based on the research data is the average temperature during the research in Captive Deer Park Village Lamtanjong 28˚C (morning), 30,5˚C (noon), and 32,5˚C (afternoon), While the temperature in the village of Panton Luas is at 24˚C (morning), 30˚C (noon), and 31,3˚C (afternoon). Data humidity Captive Deer Park Village Lamtanjong was 44% (morning), 28% (noon), and 20% (afternoon), while the average humidity in the village of Panton Luas is 46.3 % (morning), 29% (noon), and 24% (afternoon). Data measuring soil pH is 3,6 to Captive deer park Lamtanjong village, and 4.5 for the village of Panton Luas. Extensive data Breeding cage Malayan Porcupine in Deer Park is 3.15 m2 with a height of 2.3 meters, and 1.5 m2 with a height of 60 cm for Hedgehog in the village of Panton Luas. The conclusion of this research is the breeding habitat conditions in Deer Park and in the village of Panton Luas already support for the maintenance of a Porcupine
Corrosion study of pipeline material for seabed sediment in tropical climate
Corrosive environments such as marine sediments can cause corrosion to
steel pipelines at any time when certain conditions are met. Seabed sediment could cause severe corrosion damage due to its corrosiveness to the pipelines buried under it. Many consequences could take place in case if there is incident in oil/gas pipelines. Successfully identifying elements of corrosion in marine sediment would enhance the future of steel structure protection and monitoring systems. This article focuses on the behaviour of corrosion rate of steel located near shore environment and the aim is to determine the effect of sediment on corrosion of steel. To investigate that, simulated near shore sediment conditions have been used where the steel coupons buried in sediments which have different characteristics. Weight loss technique has been implemented to determine the weight loss rate of the steel specimens. Based on the
results of this study, metal weight loss increases as the duration of exposure to seabed sediment environment become longer. The sea sediment simulated condition has given significant levels of corrosion. Conclusively, the corrosion rate of steel in seabed sediment located in tropical region is complicated and further studies are suggested
Advanced Oxidation Processes for the Remediation of Problematic Organophosphorus Compounds and Perfluoroalkyl Substances
The presence of persistent organic pollutants, including organophosphorus esters (OPEs) and perfluoroalkyl substances (PFASs) in drinking water sources, is a serious threat to the environment and human health. Advanced oxidation processes (AOPs), specifically TiO2 photocatalysis and sonolysis, were evaluated to degrade these pollutants in water.
The UV/TiO2 photocatalysis can effectively degrade tris (2-chloroethyl) phosphate (TCEP) to innocuous materials. The degradation follows pseudo-first-order kinetics and consistent with the Langmuir-Hinshelwood model. Intermediate products identified by 31P-NMR show sequential oxidation of alkyl chains, ultimately leading to phosphate. Scavenger studies indicate hydroxyl radical (•OH) is the primary species responsible for the degradation.
One of the primary drawbacks of TiO2 photocatalysis is the costly UV required for TiO2 activation. We, therefore, synthesized doped NFP-TiO2 photocatalysts and demonstrated visible light activation yields •OH, keys for the photocatalysis of organic toxins. Prepared TiO2 was characterized by X-ray and spectroscopic techniques, and •OH generation was quantitated using coumarin trap under UV and visible light.
Ultrasonic irradiation, an AOP, does not require any catalysts to treat organic pollutants in water. We demonstrated the ultrasonic degradation of TCEP at 640 kHz. Hydroxyl radical scavengers added into the reaction solution before treatment indicate the degradation of TCEP proceeds through both pyrolysis and hydroxyl-mediated oxidation. Ultrasonic treatment of TCEP leads to three primary products, including the diester and monoester of TCEP confirmed by UHPLC-Orbitrap-MS studies.
Naled, a highly toxic organophosphate pesticide, was sprayed extensively aerially to exterminate mosquitos harboring the Zika virus. Little is known about the fate and degradation of Naled. Our results demonstrated that Naled can persist in the environment significantly upon condition. Ultrasonic irradiation at 640 kHz dramatically enhances the degradation of Naled, leading to the byproducts, including dimethylphosphate identified by FT-ICR-MS.
Effective degradation of a variety of emerging PFAS has been demonstrated by ultrasonic irradiation. A detailed kinetic investigation on the problematic PFAS GenX revealed that the degradation proceeds primarily by pyrolysis, and hydroxyl radical-mediated degradation is insignificant. UHPLC-Orbitrap-MS was used to identify the PFAS primary intermediates. We proposed that PFAS partition to the gas-liquid interfacial region and undergo extensive pyrolysis, leading to the conversion of fluorides
A novel Multi-permittivity Cylindrical Dielectric Resonator Antenna for Wideband Applications
In this paper, a novel multi-permittivity cylindrical dielectric resonator antenna for wideband application is presented. The multi-permittivity cylinder is formed by combining two different permittivity material sectors in such a way that each sector (with constant permittivity) is 90 degree apart. A direct microstrip line coupling terminated with T-stub at the open end is used to excite the multi-permittivity cylindrical dielectric resonator. The angular position of the multi sector dielectric resonator with respect to the longitudinal axis of the microstrip line and length of the additional strip at the open end of the feeding circuit is key parameters for wideband operation of the antenna. By optimizing all parameters of the proposed antenna, wideband impedance bandwidth of 56% (12.1 GHz - 21.65 GHz) is achieved. The average gain of the antenna throughout the bandwidth is 5.9 dB with good radiation properties in both E-plane and H-plane. A well matched simulation and experimental results show that the antenna is suitable for wideband applications
Production, Competition Indices, and Nutritive Values of Setaria Splendida, Centrosema Pubescens, and Clitoria Ternatea in Mixed Cropping Systems in Peatland
This research was conducted to evaluate production, different competition indices and nutritive value of Setaria splendida, Centrosema pubescens, and Clitoria ternatea in monoculture and mix cropping system on peat soil land. The experiment was set up in a randomized complete block design with five treatments and three replications. The five treatments were: S. splendida sole cropping (SS), C. pubescens sole cropping (CP), C. ternatea sole cropping (CT), S. splendida and C. pubescens mix cropping (SS/CP) and S. splendida/C. ternatea mix cropping (SS/CT). The DM yield of S. splendida in mixed cropping with C. pubescens increased 43.4% and in mix cropping with C. ternatea increased 15.7% compared to sole S. splendida. The value of land equivalent ratio of SS/CP (LERSS/CP) was >1. The LERSS/CT value was <1. The crowding coefficient value of S. splendida (KSS) was higher than KCP and KCT. The total value of KSS/CP and KSS/CT were >1. The competition ratio (CR) values of S. splendida in both mix cropping were >1. The agressivity (A) values of S. splendida in both mix cropping were positive. The crude protein, NDF and ADF content of forage were not affected by mix cropping system. In conclusion, mix cropping in peatland do not affect productivity and nutritive value of S. splendida, C. pubescens, and C. ternatea. S. splendida is more effective in exploiting environmental resources when intercropped with C. pubescens compared to C. ternatea on peatland
- …