Sub-10 nm colloidal lithography for integrated spin-photo-electronic devices

Colloidal lithography [1] is how patterns are reproduced in a variety of natural systems and is used more and more as an efficient fabrication tool in bio-, opto-, and nano-technology. Nanoparticles in the colloid are made to form a mask on a given material surface, which can then be transferred via etching into nano-structures of various sizes, shapes, and patterns [2,3]. Such nanostructures can be used in biology for detecting proteins [4] and DNA [5,6], for producing artificial crystals in photonics [7,8] and GHz oscillators in spin-electronics [9-14]. Scaling of colloidal patterning down to 10-nm and below, dimensions comparable or smaller than the main relaxation lengths in the relevant materials, including metals, is expected to enable a variety of new ballistic transport and photonic devices, such as spin-flip THz lasers [15]. In this work we extend the practice of colloidal lithography to producing large-area, near-ballistic-injection, sub-10 nm point-contact arrays and demonstrate their integration in to spin-photo-electronic devices.Comment: 15 pages, 5 figure

Creep-Fatigue Crack Growth in Power Plant Components

In components operating at high temperature, the presence of defect, that may derive from manufacturing process or operating under critical conditions, could raise to creep-fatigue crack growth even at low loading conditions. Creep- fatigue experimental tests have been performed on P91 material, at 600 °C according to ASTM E2760-10 standard, with focus on the effects of the initial nominal stress intensity factor range, ranging between 16 and 22 MPa m 0.5, and the hold time, ranging between 0.1 and 10 hours. The results will be presented in the paper, together with their application for residual life prediction of a power plant cracked pipe, as case study

Crack Growth Studies in Railway Axles under Corrosion Fatigue: Full-scale Experiments and Model Validation

Abstract Crack initiation and growth in full scale railway axle in A1T mild steel have been studied, under three points rotating bending loading conditions and artificial rainwater as corrosive environment. A surface plastic replication technique has been used along with optical microscopy and Scanning Electron Microscopy to monitor the environment assisted fatigue at various stages.A modified Murtaza and Akid empirical model has been employed to predict the corrosion fatigue crack growth rates and a reasonable agreement has been found between experimental and calculated lifetime

Fly fishing no-kill zones: a possible way to conjugate conservation issues, sustainable sport enhancement and local development in Alpine areas?

The promotion of sustainable tourism and outdoor sports can represent an important way to couple environmental conservation strategies and economic enhancement in marginal and Alpine areas. In this context catch and release fly fishing zones can represent an interesting tool, although no data is available on the effectiveness of these practices on Alpine salmonid population dynamics. Salmonids are the main group of fish in alpine rivers and they are the only actively targeted by anglers. Aim of this work is filling this gap, with a pilot study on two no-kill zones (Po and Pellice rivers, NW Italy). We conducted a temporal and spatial comparison between free-fishing and catch and release management river sections, with a detailed analysis on the Po River site. Our results support the hypothesis that catch and release management allows a numerical increase in wild trout populations. In particular, we detected a massive and rapid increase in younger individuals, possibly linked to a stop on the removal of large-sized reproducers. Protecting trout by the implementation of this practice can at the same time allow the increase of sustainable economic development and sport in marginal areas

Cooking influence on physico-chemical fruit characteristics of eggplant (Solanum melongena L.)

Physico-chemical traits of three eggplant genotypes ("Tunisina", "Buia" and "L 305") were evaluated before and after two cooking treatments (grilling and boiling). Different genotypes revealed different changes after cooking, with "Tunisina" showing a better retention of phytochemicals with respect to other two genotypes. The main physical phenomena were water loss during grilling, and dry matter loss after boiling. Chlorogenic acid, the main phenolic in eggplant, resulted higher in grilled samples, while delphinidin glycosides resulted more retained in boiled samples. Glycoalkaloids, thiols and biogenic amines were generally stable, while 5-hydroxy-methyl-furfural was found only in grilled samples. Interestingly, Folin-Ciocalteu index and free radical scavenging capacity, measured with three different assays, were generally increased after cooking, with a greater formation of antioxidant substances in grilled samples. NMR relaxation experiments clarified the hypothesis about the changes of eggplant compounds in terms of decomposition of larger molecules and production of small ones after cooking

PredUs: a web server for predicting protein interfaces using structural neighbors

We describe PredUs, an interactive web server for the prediction of protein–protein interfaces. Potential interfacial residues for a query protein are identified by ‘mapping’ contacts from known interfaces of the query protein’s structural neighbors to surface residues of the query. We calculate a score for each residue to be interfacial with a support vector machine. Results can be visualized in a molecular viewer and a number of interactive features allow users to tailor a prediction to a particular hypothesis. The PredUs server is available at: http://wiki.c2b2.columbia.edu/honiglab_public/index.php/Software:PredUs

Spin-orbit torques for current parallel and perpendicular to a domain wall

We report field- and current-induced domain wall (DW) depinning experiments in Ta/Co20Fe60B20/MgO nanowires through a Hall cross geometry. While purely field-induced depinning shows no angular dependence on in-plane fields, the effect of the current depends crucially on the internal DW structure, which we manipulate by an external magnetic in-plane field. We show for the first time depinning measurements for a current sent parallel to the DW and compare its depinning efficiency with the conventional case of current flowing perpendicularly to the DW. We find that the maximum efficiency is similar for both current directions within the error bars, which is in line with a dominating damping-like spin-orbit torque (SOT) and indicates that no large additional torques arise for currents parallel to the DW. Finally, we find a varying dependence of the maximum depinning efficiency angle for different DWs and pinning levels. This emphasizes the importance of our full angular scans compared to previously used measurements for just two field directions (parallel and perpendicular to the DW) and shows the sensitivity of the spin-orbit torque to the precise DW structure and pinning sites.Comment: 11 pages, 3 figure

Application of martensitic SMA alloys as passive dampers of GFRP laminated composites

This paper describes the application of SMA (Shape Memory Alloy) materials to enhance the passive damping of GFRP (Glass Fiber Reinforced Plastic) laminated composite. The SMA has been embedded as reinforcement in the GFRP laminated composite and a SMA/GFRP hybrid composite has been obtained. Two SMA alloys have been studied as reinforcement and characterized by thermo-mechanical tests. The architecture of the hybrid composite has been numerically optimized in order to enhance the structural damping of the host GFRP laminated, without significant changes of the specific weight and of the flexural stiffness. The design and the resultant high damping material are interesting and will be useful in general for applications related to passive damping. The application to a new designed lateral horn of railway collector of the Italian high speed trains is discussed

Calcium Looping for Thermochemical Storage: Assessment of Intrinsic Reaction Rate and Estimate of Kinetic/Transport Parameters for Synthetic CaO/Mayenite Particles from TGA Data

Mayenite-supported CaO represents an affordable and safetycompliant candidate material for thermochemical storage processes. We here analyze the thermogravimetric analysis (TGA) performance of synthetic CaO/mayenite micrometric powder under carbonatation/calcination looping and develop a model to interpret and analyze the experimental results. In the experimental campaign, calcination is run at 900 degrees C, while the carbonatation temperature is varied between 600 and 800 degrees C. For the carbonatation reaction, a generalized shrinking core model assuming a thermodynamically consistent first-order kinetic and a conversion-dependent diffusivity of CO2 inside the porous CaCO3 layer is validated through TGA carbonatation tests conducted with CO2/N-2 mixtures at different compositions. Interestingly, the kinetic constant of this reaction is found to be relatively insensitive to the temperature in the interval considered. In contrast, diffusion-limited regimes are never found for the calcination reaction so that this phase of the cycle can be predicted based on a single kinetic constant of the heterogeneous reaction. This constant is found to follow the typical Arrhenius-type dependence on temperature. Sizably different kinetic and transport parameters are obtained in the first carbonation performed on virgin CaO/mayenite particles with respect to those associated with subsequent cycles. When different parameters are afforded for the first and following cycles, the shrinking core model proposed closely predicts the TGA data over five CaO/CaCO3 cycles. The results found constitute an essential preliminary piece of information for designing equipment geometry and operating conditions of industrial-scale reactors. In this respect, knowledge of the parameters defining the intrinsic reaction rates and diffusive transport is essential in defining the optimal conversion of the material associated with minimal looping time

Design for the Damping of a Railway Collector Based on the Application of Shape Memory Alloys

A new design of a Cu based SMA/GFRP lateral horn of a railway collector is proposed. Synergistic contribution of the performance parameters associated with the SMA, including specific damping, specific stiffness, and volume fraction, as well as those associated with the host composite such as flexural rigidity, SMA through-the-thickness location, and SMA-host interfacial strength, is taken into account. The aim is to increase the structural damping of the first flexural mode of the horn without significantly changing its flexural stiffness and weight. The focus of this work also applies to manufacturability and the cost effectiveness of the component for future industrial production