1,667 research outputs found
On Theoretical Uncertainties of the W Angular Distribution in W-Pair Production at LEP2 Energies
We discuss theoretical uncertainties of the distribution in the cosine of the
W polar angle projected into a measurement of the anomalous triple gauge-boson
coupling \lambda=\lambda_{\gamma}=\lambda_Z at LEP2 energies for the tandem of
the Monte Carlo event generators KoralW and YFSWW3 and for the Monte Carlo
event generator RacoonWW. Exploiting numerical results of these programs and
cross-checks with experimental fitting procedures, we estimate that the
theoretical uncertainty of the value of \lambda due to electroweak corrections,
as obtained at LEP2 with the help of these programs, is ~0.005, about half of
the expected experimental error for the combined LEP2 experiments (~0.010). We
use certain idealized event selections; however, we argue that these results
are valid for realistic LEP2 measurements.Comment: 14 pages, 3 Postscript figure
Muller C-element based Decoder (MCD): A Decoder Against Transient Faults
This work extends the analysis and application of a digital error correction method called Muller C-element Decoding (MCD), which has been proposed for fault masking in logic circuits comprised of unreliable elements. The proposed technique employs cascaded Muller C-elements and XOR gates to achieve efficient error-correction in the presence of internal upsets. The error-correction analysis of MCD architecture and the investigation of C-elementâs robustness are first introduced. We demonstrate that the MCD is able to produce error-correction benefit in a high error-rate of internal faults. Significantly, for a (3,6) short-length LDPC code, when the decoding process is internally error-free the MCD achieves also a gain in terms of decoding performance by comparison to the well-known Gallager Bit-Flipping method. We further consider application of MCD to a general-purpose fault-tolerant model, coded Dual Modular Redundancy (cDMR), which offers low-redundancy error-resilience for contemporary logic systems as well as future nanoeletronic architectures
Empirical assessment of generating adversarial configurations for software product lines
Software product line (SPL) engineering allows the derivation of products tailored to stakeholdersâ needs through the setting of a large number of configuration options. Unfortunately, options and their interactions create a huge configuration space which is either intractable or too costly to explore exhaustively. Instead of covering all products, machine learning (ML) approximates the set of acceptable products (e.g., successful builds, passing tests) out of a training set (a sample of configurations). However, ML techniques can make prediction errors yielding non-acceptable products wasting time, energy and other resources. We apply adversarial machine learning techniques to the world of SPLs and craft new configurations faking to be acceptable configurations but that are not and vice-versa. It allows to diagnose prediction errors and take appropriate actions. We develop two adversarial configuration generators on top of state-of-the-art attack algorithms and capable of synthesizing configurations that are both adversarial and conform to logical constraints. We empirically assess our generators within two case studies: an industrial video synthesizer (MOTIV) and an industry-strength, open-source Web-app configurator (JHipster). For the two cases, our attacks yield (up to) a 100% misclassification rate without sacrificing the logical validity of adversarial configurations. This work lays the foundations of a quality assurance framework for ML-based SPLs
Comparison of clinical, clinicopathologic, and histologic variables in dogs with chronic inflammatory enteropathy and low or normal serum 25-hydroxycholecalciferol concentrations
Electrical detection of spin accumulation in a p-type GaAs quantum well
We report on experiments in which a spin-polarized current is injected from a
ferromagnetic electrode into a quantum well through an AlAs
barrier. The resulting spin polarization in the GaAs well is detected by
measuring how the current, tunneling to a second ferromagnetic
electrode, depends on the orientation of its magnetization. Our results can be
accounted for the non-relaxed spin splitting of the chemical potential, that is
spin accumulation, in the well. We discuss the conditions on the hole
spin relaxation time in GaAs that are required to obtain the large effects we
observe.Comment: 4 pages - 2 figues; one added note; some numbers corrected on page
Breakdown of Conformal Invariance at Strongly Random Critical Points
We consider the breakdown of conformal and scale invariance in random systems
with strongly random critical points. Extending previous results on
one-dimensional systems, we provide an example of a three-dimensional system
which has a strongly random critical point. The average correlation functions
of this system demonstrate a breakdown of conformal invariance, while the
typical correlation functions demonstrate a breakdown of scale invariance. The
breakdown of conformal invariance is due to the vanishing of the correlation
functions at the infinite disorder fixed point, causing the critical
correlation functions to be controlled by a dangerously irrelevant operator
describing the approach to the fixed point. We relate the computation of
average correlation functions to a problem of persistence in the RG flow.Comment: 9 page
A topological Dirac insulator in a quantum spin Hall phase : Experimental observation of first strong topological insulator
When electrons are subject to a large external magnetic field, the
conventional charge quantum Hall effect \cite{Klitzing,Tsui} dictates that an
electronic excitation gap is generated in the sample bulk, but metallic
conduction is permitted at the boundary. Recent theoretical models suggest that
certain bulk insulators with large spin-orbit interactions may also naturally
support conducting topological boundary states in the extreme quantum limit,
which opens up the possibility for studying unusual quantum Hall-like phenomena
in zero external magnetic field. Bulk BiSb single crystals are
expected to be prime candidates for one such unusual Hall phase of matter known
as the topological insulator. The hallmark of a topological insulator is the
existence of metallic surface states that are higher dimensional analogues of
the edge states that characterize a spin Hall insulator. In addition to its
interesting boundary states, the bulk of BiSb is predicted to
exhibit three-dimensional Dirac particles, another topic of heightened current
interest. Here, using incident-photon-energy-modulated (IPEM-ARPES), we report
the first direct observation of massive Dirac particles in the bulk of
BiSb, locate the Kramers' points at the sample's boundary and
provide a comprehensive mapping of the topological Dirac insulator's gapless
surface modes. These findings taken together suggest that the observed surface
state on the boundary of the bulk insulator is a realization of the much sought
exotic "topological metal". They also suggest that this material has potential
application in developing next-generation quantum computing devices.Comment: 16 pages, 3 Figures. Submitted to NATURE on 25th November(2007
Les turbo-codes Ă roulettes
é - Le problÚme majeur dans l'implémentation matérielle d'un turbo-décodeur réside dans le manque de parallélisme des algorithmes de décodage MAP. Cet article propose un nouveau procédé de turbo-codage basé sur deux idées: le codage de chaque dimension par P codes convolutifs récursifs circulaires indépendants et des contraintes sur la structure de l'entrelaceur qui permet de décoder en parallÚle les P codes convolutifs dans chaque dimension. La construction des codes constituants et de l'entrelaceur est décrite et analysée. Un haut degré de parallélisme est obtenu avec des performances équivalentes ou meilleures que les meilleurs turbo-codes connus. L'architecture parallÚle du décodeur permet de réduire la complexité du turbo-décodeur pour des applications à trÚs hauts débits
Comparison of reconstruction methods used during liver transplantation in case of a graft with replaced or accessory right hepatic artery:A retrospective study
Variations in graft arterial anatomy can increase the risk of postoperative hepatic arterial thrombosis (HAT), especially in presence of a replaced or accessory right hepatic artery (RHA). We retrospectively analyzed 223 cases of liver transplantations with the presence of an RHA on the graft. Patient outcomes were compared according to the four different reconstruction methods used: (i) the re-implantation of the RHA into the splenic or gastroduodenal artery (n = 106); (ii) the interposition of the superior mesenteric artery (SMA) (n = 83); (iii) dual anastomosis (n = 24); (iv) use of an aortic patch including the origins of both the SMA and the coeliac trunk (n = 10). A competing risk analysis and Inverse Probability Weighting (IPW) were used. We found that the interposition of the SMA method was associated with a significantly lower incidence of HAT, at 4.8% compared to the re-implantation method at 17.9%, dual anastomosis at 12.5%, and aortic patch at 20%, p =.03. In the competing risk analysis with IPW, the only risk factor for RHA thrombosis was the type of reconstruction. Taking the SMA interposition group as the reference, the sub-hazard ratio (sHR) was 5.05 (CI 95 [1.72; 14.78], p <.01) for the re-implantation group, sHR = 2.37 (CI 95 [0.51; 11.09], p =.27) for the dual anastomosis group and sHR = 2.24 (CI 95 [0.35; 14.33], p =.40) for the aortic patch group. There were no differences for intraoperative transfusion, hospitalization duration (p =.37) or incidence of severe complications (p =.1). The long-term graft (p =.69) and patient (p =.52) survival was not different. In conclusion, the SMA interposition method was associated with a lower incidence of RHA thrombosis.</p
- âŠ