Prognostic value of troponins in acute coronary syndrome depends upon patient age

Peer reviewedPostprin

Case study of active array feed compensation with sidelobe control for reflector surface distortion

The feasibility of electromagnetically compensating for reflector surface distortions has been investigated. The performance characteristics (gain, sidelobe levels, etc.) of large communication antenna systems degrade as the reflector surface distorts mainly due to thermal effects from a varying solar flux. The techniques described in this report can be used to maintain the design performance characteristics independently of thermal effects on the reflector surface. With the advent of monolithic microwave integrated circuits (MMIC), a greater flexibility in array-fed reflector system design can be achieved. MMIC arrays provide independent control of amplitude and phase for each of many radiating elements of the feed array. It is assumed that the surface characteristics (x,y,z, its first and second derivatives) under distorted conditions are known

Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study

The interface between the matrix phase and dispersed phase of a composite plays a critical role in influencing its properties. However, the intricate mecha-nisms of interface are not fully understood, and polymer nanocomposites are no exception. This study compares the fabrication, morphology, and mechanical and thermal properties of epoxy nanocomposites tuned by clay layers (denoted as m-clay) and graphene platelets (denoted as m-GP). It was found that a chemical modification, layer expansion and dispersion of filler within the epoxy matrix resulted in an improved interface between the filler mate-rial and epoxy matrix. This was confirmed by Fourier transform infrared spectroscopy and transmission electron microscope. The enhanced interface led to improved mechanical properties (i.e. stiffness modulus, fracture toughness) and higher glass transition temperatures (Tg) compared with neat epoxy. At 4 wt% m-GP, the critical strain energy release rate G1c of neat epoxy improved by 240 % from 179.1 to 608.6 J/m2 and Tg increased from 93.7 to 106.4 �C. In contrast to m-clay, which at 4 wt%, only improved the G1c by 45 % and Tg by 7.1 %. The higher level of improvement offered by m-GP is attributed to the strong interaction of graphene sheets with epoxy because the covalent bonds between the carbon atoms of graphene sheets are much stronger than silicon-based clay

The effect of distance on observed mortality, childhood pneumonia and vaccine efficacy in rural Gambia.

We investigated whether straight-line distance from residential compounds to healthcare facilities influenced mortality, the incidence of pneumonia and vaccine efficacy against pneumonia in rural Gambia. Clinical surveillance for pneumonia was conducted on 6938 children living in the catchment areas of the two largest healthcare facilities. Deaths were monitored by three-monthly home visits. Children living >5 km from the two largest healthcare facilities had a 2·78 [95% confidence interval (CI) 1·74-4·43] times higher risk of all-cause mortality compared to children living within 2 km of these facilities. The observed rate of clinical and radiological pneumonia was lower in children living >5 km from these facilities compared to those living within 2 km [rate ratios 0·65 (95% CI 0·57-0·73) and 0·74 (95% CI 0·55-0·98), respectively]. There was no association between distance and estimated pneumococcal vaccine efficacy. Geographical access to healthcare services is an important determinant of survival and pneumonia in children in rural Gambia

Boundary Layer Flow Control by an Array of Ramp-Shaped Vortex Generators

Flow field survey results for the effect of ramp-shaped vortex generators (VG) on a turbulent boundary layer are presented. The experiments are carried out in a low-speed wind tunnel and the data are acquired primarily by hot-wire anemometry. Distributions of mean velocity and turbulent stresses as well as streamwise vorticity, on cross-sectional planes at various downstream locations, are obtained. These detailed flow field properties, including the boundary layer characteristics, are documented with the primary objective of aiding possible computational investigations. The results show that VG orientation with apex upstream, that produces a downwash directly behind it, yields a stronger pair of streamwise vortices. This is in contrast to the case with apex downstream that produces a pair of vortices of opposite sense. Thus, an array of VG s with the former orientation, usually considered for film-cooling application, may also be superior for mixing enhancement and boundary layer separation control. (See CASI ID 20120009374 for Supplemental CD-ROM.

Antihyperglycemic Activities of Leaves of Three Edible Fruit Plants (Averrhoa carambola, Ficus hispida and Syzygium samarangense) of Bangladesh

Averrhoa carambola L. (Oxalidaceae), Ficus hispida L.f. (Moraceae), and Syzygium samarangense (Blume) Merr. & L.M. Perry (Myrtaceae) are three common plants in Bangladesh, the fruits of which are edible. The leaves and fruits of A. carambola and F. hispida are used by folk medicinal practitioners for treatment of diabetes, while the leaves of S. samarangense are used for treatment of cold, itches, and waist pain. Since scientific studies are absent on the antihyperglycemic effects of the leaves of the three plants, it was the objective of the present study to evaluate the antihyperglycemic potential of methanolic extract of leaves of the plants in oral glucose tolerance tests carried out with glucose-loaded mice. The extracts at different doses were administered one hour prior to glucose administration and blood glucose level was measured after two hours of glucose administration (p.o.) using glucose oxidase method. Significant oral hypoglycemic activity was found with the extracts of leaves of all three plants tested. The fall in serum glucose levels were dose-dependent for every individual plant, being highest at the highest dose tested of 400 mg extract per kg body weight. At this dose, the extracts of A. carambola, F. hispida, and S. samarangense caused, respectively, 34.1, 22.7, and 59.3% reductions in serum glucose levels when compared to control animals. The standard antihyperglycemic drug, glibenclamide, caused a 57.3% reduction in serum glucose levels versus control. Among the three plants evaluated, the methanolic extract of leaves of S. samarangense proved to be the most potent in demonstrating antihyperglycemic effects. The result validates the folk medicinal uses of A. carambola and F. hispida in the treatment of diabetes, and indicates that the leaves of S. samarangense can also possibly be used for amelioration of diabetes-induced hyperglycemia.Key words: Averrhoa carambola, Ficus hispida, Syzygium samarangense, antihyperglycemi

Automatic eduction and statistical analysis of coherent structures in the wall region of a confine plane

This paper describes a vortex detection algorithm used to expose and statistically characterize the coherent flow patterns observable in the velocity vector fields measured by Particle Image Velocimetry (PIV) in the impingement region of air curtains. The philosophy and the architecture of this algorithm are presented. Its strengths and weaknesses are discussed. The results of a parametrical analysis performed to assess the variability of the response of our algorithm to the 3 user-specified parameters in our eduction scheme are reviewed. The technique is illustrated in the case of a plane turbulent impinging twin-jet with an opening ratio of 10. The corresponding jet Reynolds number, based on the initial mean flow velocity U0 and the jet width e, is 14000. The results of a statistical analysis of the size, shape, spatial distribution and energetic content of the coherent eddy structures detected in the impingement region of this test flow are provided. Although many questions remain open, new insights into the way these structures might form, organize and evolve are given. Relevant results provide an original picture of the plane turbulent impinging jet

Development and in-vitro Evaluation of Once Daily Tablet Dosage Form of Loxoprofen Sodium

Purpose: To formulate and characterize once daily controlled release tablet of loxoprofen sodium.Methods: Eudragit RS-100, hydroxylpropyl methylcellulose (HPMC) and pectin were used as release retarding polymers. All the formulations were prepared by direct compression method. Various precompression studies were carried out to determine Hausner’s ratio, Carr’s index, angle of repose, bulk density and tapped density Differential scanning calorimetry (DSC) studies and also post-compression studies to evaluate hardness, friability, weight variation, drug content, in-vitro drug release were conducted on the tablets. The drug release data were subjected to kinetic models, including zero order, first order, Hixon Crowell, Higuchi and Korsmeyer-Peppas.Results: Compressibility index (7.6 ± 1.32 - 12.5 ± 1.43%), Hausner’s ratio (1.08 ± 0.04 - 1.14 ± 0.03), angle of repose (27.78 ± 0.47 - 30.49 ± 0.46°), hardness (6.25 ± 0.27 - 7.21±0.21 kg/cm2), friability (0.14 ± 0.06 - 0.28 ± 0.0 %), weight variation (249.5 ± 2.09 - 251.35 ± 2.41 mg) and drug content  (97.30 ± 0.28 - 103.70 ± 0.31 %) were within generally accepted limits for the pre-and post-compression formulations, respectively. The tablets having the maximum amount of among the three polymers tested as matrix materials, HPMC, represented by F3 tablets, exerted better sustained release properties after 12 h. Release pattern was more of Fickian diffusion followed by Higuchi mechanism.Conclusion: The release of the loxoprofen sodium was optimized up to 12 h.Keywords: Loxoprofen, Sustained release, hydroxypropyl methylcelluose, Pectin, Eudragit, Matrix tablet