A European Design Code for Pallet Racking

The work leading to a European design code for pallet racking started almost 25 years ago. Many difficulties were encountered in the early days of this work. Notable were the absence of a consistent safety philosophy between the various countries of Europe and the existence of procedures with which the manufacturers were comfortable but which were potentially unsafe. There were also difficulties in defining acceptable standard. test procedures. The emergence of Eurocode 3, especially Part 1.3 dealing with cold formed sections, provided a new impetus to the work because here was a European code which provided the required basis for the design code. Accordingly, Section X of the Federation Europeenne de la Manutention (FEM) commissioned technical experts to draft the new code under the direction of its technical committee. It was a requirement that the code should be, as far as possible, compatible with Eurocode 3. In the early stages of the work, there were a group of these experts but, for most of the drafting period, only the authors of this paper were active. The code was essentially complete in mid 1997 and, since then, it has been subject to trial use by the member companies of FEM and open to consequential comments. However, in May 1997, a significant meeting took place. FEM and the Rack Manufacturers Institute (RMI) of the USA sponsored a meeting between the first author and RMI\u27s own expert , Professor T Pekoz of Cornell University. The intention was to compare the two codes and to report on the potential for possible future harmonisation. It emerged that the two codes were about as different as two codes covering the design of the same structural elements could be! However, the experts took a positive view of the situation and concluding that, from the technical point of view, there was no reason why the two codes could not be brought into convergence and that, in the meantime, we could each learn from the others experience. Consequently, at this late stage in the evolution of the European code, a number of significant changes were made where it was considered that the European code could advantageously be made more compatible with the RMI code without in any way impairing its technical rigour. This paper introduces the new European design code for pallet racking and compares and contrasts it with its American counterpart. As a pallet rack is a particularly demanding application of cold-formed steel sections, it is hoped that the designers of other cold-formed products may also learn from some of the approaches described in this paper

Phenotype-environment matching in sand fleas

This is the final version of the article. Available from the publisher via the DOI in this record.Camouflage is perhaps the most widespread anti-predator strategy in nature, found in numerous animal groups. A long-standing prediction is that individuals should have camouflage tuned to the visual backgrounds where they live. However, while several studies have demonstrated phenotype-environment associations, few have directly shown that this confers an improvement in camouflage, particularly with respect to predator vision. Here, we show that an intertidal crustacean, the sand flea (Hippa testudinaria), has coloration tuned to the different substrates on which it occurs when viewed by potential avian predators. Individual sand fleas from a small, oceanic island (Ascension) matched the colour and luminance of their own beaches more closely than neighbouring beaches to a model of avian vision. Based on past work, this phenotype-environment matching is likely to be driven through ontogenetic changes rather than genetic adaptation. Our work provides some of the first direct evidence that animal coloration is tuned to provide camouflage to prospective predators against a range of visual backgrounds, in a population of animals occurring over a small geographical range.M.S., A.E.L. and J.T.: Biotechnology and Biological Sciences Research Council (BB/G022887/1). Fieldwork was funded by the Darwin Initiative (Project no. 19-026)

The importance of passive integrated transponder (PIT) tags for measuring life-history traits of sea turtles

Capture-mark-recapture studies rely on the identification of individuals through time, using markers or tags, which are assumed to be retained. This assumption, however, may be violated, having implications for population models. In sea turtles, individual identification is typically based on external flipper tags, which can be combined with internal passive integrated transponder (PIT) tags. Despite the extensive use of flipper tags, few studies have modelled tag loss using continuous functions. Using a 26-year dataset for sympatrically nesting green (Chelonia mydas) and loggerhead (Caretta caretta) turtles, this study aims to assess how PIT tag use increases the accuracy of estimates of life-history traits. The addition of PIT tags improved female identification: between 2000 and 2017, 53% of green turtles and 29% of loggerhead turtles were identified from PIT tags alone. We found flipper and PIT tag losses were best described by decreasing logistic curves with lower asymptotes. Excluding PIT tags from our dataset led to underestimation of flipper tag loss, reproductive periodicity, reproductive longevity and annual survival, and overestimation of female abundance and recruitment for both species. This shows the importance of PIT tags in improving the accuracy of estimates of life-history traits. Thus, estimates where tag loss has not been corrected for should be interpreted with caution and could bias IUCN Red List assessments. As such, long-term population monitoring programmes should aim to estimate tag loss and assess the impact of loss on life-history estimates, to provide robust estimates without which population models and stock assessments cannot be derived accurately

Seasonal changes in basking shark vertical space-use in the north-east Atlantic

This is the final version. Available on open access from Springer via the DOI in this recordMobile marine species can exhibit vast movements both horizontally and vertically. Spatial analysis of vertical movements may help improve an understanding of the processes that influence space-use. Previously, vertical space-use of basking sharks (Cetorhinus maximus) in the north-east Atlantic described movements largely within waters of the continental shelf during summer and autumn months, with few records of detailed vertical behaviour during winter. We use archival satellite telemetry data from 32 basking sharks (twelve females, six males, and fourteen of unknown sex measuring 4-5 m (n = 6), 5-6 m (n = 10), 6-7 m (n = 7), 7-8 m (n = 8), and 8-9 m (n = 1) estimated total length) tracked over four years (2012-2015). The satellite tags provided depth and temperature data for a cumulative 4,489 days (mean 140 ± 97 days per shark, range: 10-292 days) in order to describe vertical space-use and thermal range of basking sharks in the north-east Atlantic. Basking sharks exhibit seasonality in vertical space-use, revealing repeated ‘yo-yo’ movement behaviour with periods of occupancy at depths greater than 1,000 metres in late winter/early spring. Describing seasonal vertical space-use in marine megavertebrates can increase knowledge of movements throughout their environment including physiological and morphological constraints to movement, nutrient transfer, and overlap with anthropogenic threats in order to inform future conservation strategies.Scottish Natural HeritageUniversity of ExeterNER

Green turtles highlight connectivity across a regional marine protected area network in west Africa

Networks of marine protected areas (MPAs) are invaluable for the protection of species with high dispersal capacity, yet connectivity within networks is poorly understood. We demonstrate the connectivity within the regional MPA network in West Africa (RAMPAO), mediated by the largest green turtle population in the eastern Atlantic Ocean. We equipped with satellite tags 45 female green turtles nesting in the Bijagó s Archipelago, Guinea-Bissau, and tracked them during internesting, migration, and foraging to quantify the degree of coverage the RAMPAO network provides during each of these critical periods. During the internesting period, turtles were largely concentrated around the nesting islands, with a mean of 94.8% (SD 0.1%, range: 46% - 100%, n = 40 turtles) of tracking positions falling within MPA limits. Among the 35 turtles successfully tracked into the foraging period, we identified variable migratory strategies, with 12 turtles remaining near-resident at distances of 40-90 km from breeding sites, 10 turtles migrating 300-400 km to The Gambia and Senegal, and 13 turtles traveling >1000 km to northern Mauritania. Of the 35 foraging turtles, 26 used MPAs, with a mean of 78.0% (SD 34.8%, range: 3.7% - 100%) of their tracking positions falling within the limits of RAMPAO MPAs, across Guinea-Bissau, Senegal and Mauritania. Migration corridors with high concentrations of passing turtles were mostly located nearshore, and 21% of these high passage areas fell within the MPA network. Overall, we found that this population connects five RAMPAO MPAs, yet some foraging sites (e.g., in the Bijagó s) and important migration areas (e.g., Cap-Vert peninsula) described here are currently unprotected. These results are relevant to any considerations of MPA extension or establishment within the regional network, which would contribute towards meeting the Convention on Biological Diversity targets for national marine protected area estate coverage. By documenting biological connectivity across RAMPAO, this study represents an important example of the relevance of international protected area networks for green turtle conservation and for wider conservation action at a regional scale.Fundação para a Ciência e Tecnologia - FCTinfo:eu-repo/semantics/publishedVersio

Plastic and marine turtles: a review and call for research

Plastic debris is now ubiquitous in the marine environment affecting a wide range of taxa, from microscopic zooplankton to large vertebrates. Its persistence and dispersal throughout marine ecosystems has meant that sensitivity toward the scale of threat is growing, particularly for species of conservation concern, such as marine turtles. Their use of a variety of habitats, migratory behaviour, and complex life histories leave them subject to a host of anthropogenic stressors, including exposure to marine plastic pollution. Here, we review the evidence for the effects of plastic debris on turtles and their habitats, highlight knowledge gaps, and make recommendations for future research. We found that, of the seven species, all are known to ingest or become entangled in marine debris. Ingestion can cause intestinal blockage and internal injury, dietary dilution, malnutrition, and increased buoyancy which in turn can result in poor health, reduced growth rates and reproductive output, or death. Entanglement in plastic debris (including ghost fishing gear) is known to cause lacerations, increased drag—which reduces the ability to forage effectively or escape threats—and may lead to drowning or death by starvation. In addition, plastic pollution may impact key turtle habitats. In particular, its presence on nesting beaches may alter nest properties by affecting temperature and sediment permeability. This could influence hatchling sex ratios and reproductive success, resulting in population level implications. Additionally, beach litter may entangle nesting females or emerging hatchlings. Lastly, as an omnipresent and widespread pollutant, plastic debris may cause wider ecosystem effects which result in loss of productivity and implications for trophic interactions. By compiling and presenting this evidence, we demonstrate that urgent action is required to better understand this issue and its effects on marine turtles, so that appropriate and effective mitigation policies can be developed