Life Cycle Assessment with BIM Towards Sustainable Energy Policy-Making: The Case of Urban Transformation in Istanbul

Buildings are responsible for almost forty percent of global energy. Due to their high consumption of energy, buildings are on the front line of sustainability researches. In Turkey, six million out of twenty-two million buildings need to be demolished and rebuilt to meet seismic standards. These buildings are also far below the standards in terms of energy efficiency. Therefore, urban transformation can be thought of as a great opportunity for energy efficiency. This study investigates four things: (i) the energy-efficient urban transformation strategy in GaziosmanpaÅŸa-Istanbul region, which is selected as a case study; (ii) the effect of energy efficiency in this market; (iii) the adequacy of energy standards of Turkey; and (iv) contribution of digitalization in construction to sustainability with Building Information Modelling (BIM) and energy analysis. According to the energy efficiency scenarios, energy analyses were carried out on the BIM model. The most cost-effective strategy was determined with the Life Cycle Cost method. When compared with the current situation, it is possible to save energy up to 227 GWh a year, which is equal to the annual heating energy demand of approximately 30,000 housing, in the case study area with the most efficient scenario to be realized

The role of Si impurities in the transient dopant segregation and precipitation in yttrium-doped alumina

Y-doped alumina was sintered at 1500 degrees C for 10 h under ultra-clean experimental conditions without experiencing any abnormal grain growth. The yttrium was fairly homogeneously distributed at the grain boundaries, with a mean value of (Gamma) over bar (Y) = 5.5 at nm(-2). The Y-Al-O precipitates in the clean, Y2O3-doped alumina specimen were the YAP (YAlO3) phase, whereas only the YAG (Y3Al5O12) phase was present in the Y2O3-doped alumina samples contaminated with SiO2. The excess concentrations of Y and Si atoms at the grain boundaries that, at the same time, provoke the formation of structurally complex YAG precipitates and abnormal grain growth were both estimated to be at 4-5 at nm(-2). The compositions of the triple point pocket phases found in the region of the exaggeratedly grown alumina grains indicate the presence of alumino-silicate bulk liquids at the sintering temperature

Dietary L-arginine supplementation reduces Methotrexate-induced intestinal mucosal injury in rat

<p>Abstract</p> <p>Background</p> <p>Arginine (ARG) and nitric oxide maintain the mucosal integrity of the intestine in various intestinal disorders. In the present study, we evaluated the effects of oral ARG supplementation on intestinal structural changes, enterocyte proliferation and apoptosis following methotrexate (MTX)-induced intestinal damage in a rat.</p> <p>Methods</p> <p>Male rats were divided into four experimental groups: Control rats, CONTR-ARG rats, were treated with oral ARG given in drinking water 72 hours before and 72 hours following vehicle injection, MTX rats were treated with a single dose of methotrexate, and MTX-ARG rats were treated with oral ARG following injection of MTX. Intestinal mucosal damage, mucosal structural changes, enterocyte proliferation and enterocyte apoptosis were determined 72 hours following MTX injection. RT-PCR was used to determine bax and bcl-2 mRNA expression.</p> <p>Results</p> <p>MTX-ARG rats demonstrated greater jejunal and ileal bowel weight, greater ileal mucosal weight, greater ileal mucosal DNA and protein levels, greater villus height in jejunum and ileum and crypt depth in ileum, compared to MTX animals. A significant decrease in enterocyte apoptosis in the ileum of MTX-ARG rats (vs MTX) was accompanied by decreased bax mRNA and protein expression and increased bcl-2 protein levels.</p> <p>Conclusions</p> <p>Treatment with oral ARG prevents mucosal injury and improves intestinal recovery following MTX- injury in the rat.</p

A gastrointestinal stromal tumor with mesenteric and retroperitoneal invasion

<p>Abstract</p> <p>Background</p> <p>Gastrointestinal stromal tumors are rare visceral sarcomas arising in the gastrointestinal tract wall. In this report we present a case of gastrointestinal stromal tumors with mesenteric and retroperitoneal invasion, describe and discuss its computed tomography findings.</p> <p>Case presentation</p> <p>A 57-years-old male patient has been complaining of abdominal distention, weight lose, and hematuria. During physical examination, significant distention and multiple palpable tumor masses were identified on the abdomen. Abdominal computed tomography showed multiple, well-defined, soft tissue masses with homogenous and heterogeneous pattern, in the mesenteric and retroperitoneal areas. Unlike specific features of gastrointestinal stromal tumor, renal obstruction and atypical central calcification without chemotherapy that has not been yet described were seen in this case. Computed tomography did not reveal liver metastases and/or the lymph nodes with pathological size. Ultrasonography-guided true-cut^®biopsy was made, histopathologic and immunohistochemical analyses demonstrated stromal tumor which, C-KIT (+). The patient underwent left ureterectomy, left nephrectomy and total colectomy. Postoperative histopathological analyses revealed lower grade malignant GISTs. As of 17 months after the surgery, he is alive and free of recurrence.</p> <p>Conclusion</p> <p>When intraabdominal, multiple, large (>5 cm), well-circumscribed, homogenous or heterogeneous mass lesions without ascites, omental caking and lymph nodes metasteses were seen, gastrointestinal stromal tumors should be considered in the differential diagnosis.</p

Effect of curing time on selected properties of soil stabilized with fly ash, marble dust and waste sand for road sub-base materials

The properties of sub-base filling materials in highway construction are essential, as they can determine the performance of the road in service. Normally, the existing materials are removed and replaced with new materials that have adequate load-bearing capacity. Rising environmental concern and new environmental legislations have made construction professionals consider other methods. These methods include stabilizing the existing materials with other additives to improve their performance. Additives can be waste materials generated by different industries. In this work, the existing excavated soil is stabilized with waste materials. The wastes consisted of fly ash, marble dust and waste sand. The percentage addition of waste materials was 5%, 10%, 15% and 20% (by mass) of the existing soil. The soil/waste specimens were cured for 1, 7, 28, 56, 90 and 112 days before testing. Testing included the dry unit weight and unconfined compressive strength ( qu) as well as X-ray diffraction analysis and scanning electron microscopy observation. Also, the California Bearing Ratio values were obtained and are reported in this investigation. The results showed that the qu values increased with the increase in waste materials content. Also, there is tendency for the dry unit weight to increase with the increase in waste materials