198 research outputs found

    High On/Off Ratio Graphene Nanoconstriction Field Effect Transistor

    Full text link
    We report a method to pattern monolayer graphene nanoconstriction field effect transistors (NCFETs) with critical dimensions below 10 nm. NCFET fabrication is enabled by the use of feedback controlled electromigration (FCE) to form a constriction in a gold etch mask that is first patterned using conventional lithographic techniques. The use of FCE allows the etch mask to be patterned on size scales below the limit of conventional nanolithography. We observe the opening of a confinement-induced energy gap as the NCFET width is reduced, as evidenced by a sharp increase in the NCFET on/off ratio. The on/off ratios we obtain with this procedure can be larger than 1000 at room temperature for the narrowest devices; this is the first report of such large room temperature on/off ratios for patterned graphene FETs.Comment: 18 pages, 6 figures, to appear in Smal

    Controlled Doping of Graphene Using Ultraviolet Irradiation

    Get PDF
    The electronic properties of graphene are tunable via doping, making it attractive in low dimensional organic electronics. Common methods of doping graphene, however, adversely affect charge mobility and degrade device performance. We demonstrate a facile shadow mask technique of defining electrodes on graphene grown by chemical vapor deposition (CVD) thereby eliminating the use of detrimental chemicals needed in the corresponding lithographic process. Further, we report on the controlled, effective, and reversible doping of graphene via ultraviolet (UV) irradiation with minimal impact on charge mobility. The change in charge concentration saturates at ~2 x 1012cm-2 and the quantum yield is 10-5 e/photon upon initial UV exposure. This simple and controlled strategy opens the possibility of doping wafer-size CVD graphene for diverse applications

    Kaempferol nanoparticles achieve strong and selective inhibition of ovarian cancer cell viability.

    Get PDF
    Ovarian cancer is one of the leading causes of cancer death for women throughout the Western world. Kaempferol, a natural flavonoid, has shown promise in the chemoprevention of ovarian cancer. A common concern about using dietary supplements for chemoprevention is their bioavailability. Nanoparticles have shown promise in increasing the bioavailability of some chemicals. Here we developed five different types of nanoparticles incorporating kaempferol and tested their efficacy in the inhibition of viability of cancerous and normal ovarian cells. We found that positively charged nanoparticle formulations did not lead to a significant reduction in cancer cell viability, whereas nonionic polymeric nanoparticles resulted in enhanced reduction of cancer cell viability. Among the nonionic polymeric nanoparticles, poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) nanoparticles incorporating kaempferol led to significant reduction in cell viability of both cancerous and normal cells. Poly(DL-lactic acid-co-glycolic acid) (PLGA) nanoparticles incorporating kaempferol resulted in enhanced reduction of cancer cell viability together with no significant reduction in cell viability of normal cells compared with kaempferol alone. Therefore, both PEO-PPO-PEO and PLGA nanoparticle formulations were effective in reducing cancer cell viability, while PLGA nanoparticles incorporating kaempferol had selective toxicity against cancer cells and normal cells. A PLGA nanoparticle formulation could be advantageous in the prevention and treatment of ovarian cancers. On the other hand, PEO-PPO-PEO nanoparticles incorporating kaempferol were more effective inhibitors of cancer cells, but they also significantly reduced the viability of normal cells. PEO-PPO-PEO nanoparticles incorporating kaempferol may be suitable as a cancer-targeting strategy, which could limit the effects of the nanoparticles on normal cells while retaining their potency against cancer cells. We have identified two nanoparticle formulations incorporating kaempferol that may lead to breakthroughs in cancer treatment. Both PEO-PPO-PEO and PLGA nanoparticle formulations had superior effects compared with kaempferol alone in reducing cancer cell viability

    Photoluminescence and Band Gap Modulation in Graphene Oxide

    Get PDF
    We report broadband visible photoluminescence from solid graphene oxide, and modifications of the emission spectrum by progressive chemical reduction. The data suggest a gapping of the two-dimensional electronic system by removal of π-electrons. We discuss possible gapping mechanisms, and propose that a Kekule pattern of bond distortions may account for the observed behavior

    Electromagnetic Interference in Measurements of Radial Stress During Split Hopkinson Pressure Bar Experiments

    Get PDF
    Split Hopkinson pressure bar experiments on soils are often carried out using a rigid steel confining ring to provide plane strain conditions, and measurements of the circumferential strain in the ring can be used to infer the radial stress on the surface of the specimen. Previous experiments have shown evidence of irregular electromagnetic interference in measurements of radial stress, which obscures the signals and impedes analysis. The development of robust constitutive models for soils in blast and impact events relies on the accurate characterisation of this behaviour, and so it is necessary to isolate and remove the source of interference. This paper uses an induction coil to identify the source of the anomalous signals, which are found to be due to induced currents in the gauge lead wires from the movement of magnetised pressure bars (martensitic stainless steel, 440C). Comparative experiments on sand and rubber specimens are used to show that the deforming soil specimen does not make a significant contribution to this activity, and recommendations are made on reducing electromagnetic interference to provide reliable radial stress measurements

    In-situ electronic characterization of graphene nanoconstrictions fabricated in a transmission electron microscope

    Full text link
    We report electronic measurements on high-quality graphene nanoconstrictions (GNCs) fabricated in a transmission electron microscope (TEM), and the first measurements on GNC conductance with an accurate measurement of constriction width down to 1 nm. To create the GNCs, freely-suspended graphene ribbons were fabricated using few-layer graphene grown by chemical vapor deposition. The ribbons were loaded into the TEM, and a current-annealing procedure was used to clean the material and improve its electronic characteristics. The TEM beam was then used to sculpt GNCs to a series of desired widths in the range 1 - 700 nm; after each sculpting step, the sample was imaged by TEM and its electronic properties measured in-situ. GNC conductance was found to be remarkably high, comparable to that of exfoliated graphene samples of similar size. The GNC conductance varied with width approximately as, where w is the constriction width in nanometers. GNCs support current densities greater than 120 \muA/nm2, two orders of magnitude higher than has been previously reported for graphene nanoribbons and 2000 times higher than copper.Comment: 17 pages, 4 figures. Accepted by Nano Letter
    • …
    corecore