Analysis of benzo(a)pyrene in airborne particulates by gas chromatography

A routine method was developed to measure benzo(a)pyrene in airborne particulates. Samples were collected on a filter and the organic portion was extracted with cyclohexane. The polynuclear hydrocarbon (PNHC) fraction was separated from the aliphatics by column chromatography. An internal standard was added to the extract and a portion of it was injected into a gas chromatograph. Although the gas chromatographic method has often been reported in the literature, satisfactory separation of benzo(a)pyrene and benzo(e)pyrene has not been achieved. With the introduction of a nematic liquid crystal as the stationary phase good separation is now possible

Testrun results from prototype fiber detectors for high rate particle tracking

A fiber detector concept has been realized allowing to registrate particles within less than 100 nsec with a space point precision of about 0.1 mm at low occupancy. Three full size prototypes have been build by different producers and tested at a 3 GeV electron beam at DESY. After 3 m of light guides 8-10 photoelectrons were registrated by multichannel photomultipliers providing an efficiency of more than 99%. Using all available data a resolution of 0.086 mm was measured.Comment: 18 pages, 17 figure

Developing Optimal Growth Parameters for the Green Microalgae Nannochloris oculata and the Diatom Nitzschia sp. for Large scale Raceway Production

Microalgae produce large quantities of lipids that can be used for biofuel feedstock. The goal of this project was to determine the effect of several engineering and management parameters on the productivity of microalgae cultivated in large, outdoor facilities. The specific objectives were focused on the effects of inoculation ratios; the effects of light, temperature, and culture depth on growth; and the minimum circulation velocity necessary to maintain growth and minimize settling in open ponds. Microalgae must first be cultured in smaller quantities before the raceway is inoculated for optimized growth. Concentration ratios are defined as the ratio of the volume of microalgae inoculum to the volume of new growth media. The microalgae species used was Nannochloris oculata (UTEX #LB 1998). Inoculation ratios studied varied from 1:1 to 1:32 and were grown in 500 mL Erlenmeyer flasks. The study found that 1:16 and 1:32 were too dilute, while the 1:8 concentration had the largest growth rate. Determination of the effects of temperature, light intensity, and cultivation depth is critical to maintaining healthy cultures. Excess light intensity can result in photoinhibition and temperatures above the maximum growing tolerance can have detrimental effects. These factors can affect growth and evidence suggests an interaction that exacerbates these effects. In an outdoor culture there are few practical control variables other than pond depth. As cultivation depth increases, the algae undergo "selfshading" and the increased cultivation volume hinders temperature changes. Scaled raceway ponds were maintained at 10.16 cm (4 inch) and 13.97 cm (5.5 inch) depths. The species used was Nannochloris oculata and it was found to grow best at 785 micromol m⁻² s⁻¹m^-2 s^-1, 20°C, and 10.16 cm. Diatoms are attractive because of high growth rates, faster lipid production, and greater cell density. The latter promotes rapid settling once mixing has stopped. Because of the silica cell wall composition, diatoms are believed to be more susceptible to shear forces which can result in lysis. Determining the natural settling rate to the minimum channel velocity relationship in cultivation ponds was the objective. No flocculants/coagulants were added which created a case of "natural" settling. Four pennate Nitzschia sp. and one centric diatom were tested in a jar tester. There was no significant difference in settling times between the species. The mean settling time was 4.55 cm min⁻¹ and the minimum channel velocity was determined to be 10.12 cm min⁻¹