103 research outputs found
On the nonlinear dynamics of a rotor in autorotation:a combined experimental and numerical approach
This article presents a systematic assessment of the use of numerical continuation and bifurcation techniques in investigating the nonlinear periodic behaviour of a teetering rotor operating in forward autorotation. The aim is to illustrate the potential of these tools in revealing complex blade dynamics, when used in combination (not necessarily at the same time) with physical testing. We show a simple procedure to promote understanding of an existing but not fully understood engineering instability problem, when uncertainties in the numerical modelling and constraints in the experimental testing are present. It is proposed that continuation and bifurcation methods can play a significant role in developing numerical and experimental techniques for studying the nonlinear dynamics not only for rotating blades but also for other engineering systems with uncertainties and constraints.</jats:p
Influence of Variable Side-Stay Geometry on the Shimmy Dynamics of an Aircraft Dual-Wheel Main Landing Gear
Commercial aircraft are designed to fly but also need to operate safely and efficiently as vehicles on the ground. During taxiing, take-off, and landing the landing gear must operate reliably over a wide range of forward velocities and vertical loads. Specifically, it must maintain straight rolling under a wide variety of operating conditions. It is well known, however, that under certain conditions the wheels of the landing gear may display unwanted oscillations, referred to as shimmy oscillations, during ground maneuvers. Such oscillations are highly unwanted from a safety and a ride-comfort perspective. In this paper we conduct a study into the occurrence of shimmy oscillations in a main landing gear (MLG) of a typical midsize passenger aircraft. Such a gear is characterized by a main strut attached to the wing spar with a side-stay that connects the main strut to an attachment point closer to the fuselage center line. Nonlinear equations of motion are developed for the specific case of a two-wheeled MLG configuration and allow for large angle deflections within the geometrical framework of the system. The dynamics of the MLG are expressed in terms of three degrees of freedom: torsional motion, in-plane motion, and out-of-plane motion (with respect to the side-stay plane). These are modeled by oscillators that are coupled directly through the geometric configuration of the system as well as through the tire/ground interface, which is modeled here by the von Schlippe stretched string approximation of the tire dynamics. The mathematical model is fully parameterized and parameters are chosen to represent a generic (rather than a specific) landing gear. In particular, the positions of the attachment points are fully parameterized so that any orientation of the side-stay plane can be considered. The occurrence of shimmy oscillations is studied by means of a two-parameter bifurcation analysis of the system in terms of the forward velocity of the aircraft and the vertical force acting on the gear. The effect of a changing side-stay plane orientation angle on the bifurcation diagram is investigated. We present a consistent picture that captures the transition of the two-parameter bifurcation diagram as a function of this angle, with a considerable complexity of regions of different types of shimmy oscillations for intermediate and realistic side-stay plane orientations. In particular, we find a region of tristability in which stable torsional, in-plane, and out-of-plane shimmy oscillations coexist
A bifurcation study to guide the design of a landing gear with a combined uplock/downlock mechanism
This paper discusses the insights that a bifurcation analysis can provide when designing mechanisms. A model, in the form of a set of coupled steady-state equations, can be derived to describe the mechanism. Solutions to this model can be traced through the mechanism's state versus parameter space via numerical continuation, under the simultaneous variation of one or more parameters. With this approach, crucial features in the response surface, such as bifurcation points, can be identified. By numerically continuing these points in the appropriate parameter space, the resulting bifurcation diagram can be used to guide parameter selection and optimization. In this paper, we demonstrate the potential of this technique by considering an aircraft nose landing gear, with a novel locking strategy that uses a combined uplock/downlock mechanism. The landing gear is locked when in the retracted or deployed states. Transitions between these locked states and the unlocked state (where the landing gear is a mechanism) are shown to depend upon the positions of two fold point bifurcations. By performing a two-parameter continuation, the critical points are traced to identify operational boundaries. Following the variation of the fold points through parameter space, a minimum spring stiffness is identified that enables the landing gear to be locked in the retracted state. The bifurcation analysis also shows that the unlocking of a retracted landing gear should use an unlock force measure, rather than a position indicator, to de-couple the effects of the retraction and locking actuators. Overall, the study demonstrates that bifurcation analysis can enhance the understanding of the influence of design choices over a wide operating range where nonlinearity is significant
An extension of the structured singular value to nonlinear systems with application to robust flutter analysis
On the effect of model uncertainty on the Hopf bifurcation of aeroelastic systems
This paper investigates the effect of model uncertainty on the nonlinear dynamics of a generic aeroelastic system. Among the most dangerous phenomena to which these systems are prone, Limit Cycle Oscillations are periodic isolated responses triggered by the nonlinear interactions among elastic deformations, inertial forces, and aerodynamic actions. In a dynamical systems setting, these responses typically emanate from Hopf bifurcation points, and thus a recently proposed framework, which address the problem of robustness from a nonlinear dynamics viewpoint, is employed. Briefly, the notion of robust bifurcation margin extends the concept of mu analysis technique from the robust control theory. The main contribution of this article is a systematic investigation of the numerous scenarios arising in the study of nonlinear flutter when uncertainties in the model are accounted for in the analyses. The advantages of adopting this framework include the possibility to: quantify relevant information for the determination of the nonlinear stability envelope; gain a more in-depth understanding of the physical mechanisms triggering subcritical and supercritical Hopf bifurcations; and reveal properties of the nominal system by identifying isolated branches not straightforward to detect with conventional numerical approaches.Open Access funding provided by Swiss Federal Institute of Technology Zurich This work has received funding from the Horizon 2020 research and innovation programme under grant agreement No. 636307, project FLEXOP
- …