Quantized Friction across Ionic Liquid Thin Films

Ionic liquids, salts in the liquid state under ambient conditions, are of great interest as precision lubricants. Ionic liquids form layered structures at surfaces, yet it is not clear how this nano-structure relates to their lubrication properties. We measured the friction force between atomically smooth solid surfaces across ionic liquid films of controlled thickness in terms of the number of ion layers. Multiple friction-load regimes emerge, each corresponding to a different number of ion layers in the film. In contrast to molecular liquids, the friction coefficients differ for each layer due to their varying composition

Fine tuning the ionic liquid–vacuum outer atomic surface using ion mixtures

Ionic liquid–vacuum outer atomic surfaces can be created that are remarkably different from the bulk composition. In this communication we demonstrate, using low-energy ion scattering (LEIS), that for ionic liquid mixtures the outer atomic surface shows significantly more atoms from anions with weaker cation–anion interactions (and vice versa)

Thermal stability of dialkylimidazolium tetrafluoroborate and hexafluorophosphate ionic liquids: ex situ bulk heating to complement in situ mass spectrometry

Thermal decomposition (TD) products of the ionic liquids (ILs) [CnC1Im][BF4] and [CnC1Im][PF6] ([CnC1Im]+ = 1-alkyl-3-methylimidazolium, [BF4]- = tetrafluoroborate, and [PF6]- = hexafluorophosphate) were prepared, ex situ, by bulk heating experiments in a bespoke setup. The respective products, CnC1(C3N2H2)BF3 and CnC1(C3N2H2)PF5 (1-alkyl-3-methylimidazolium-2-trifluoroborate and 1-alkyl-3-methylimidazolium-2-pentafluorophosphate), were then vaporized and analyzed by direct insertion mass spectrometry (DIMS) in order to identify their characteristic MS signals. During IL DIMS experiments we were subsequently able, in situ, to identify and monitor signals due to both IL vaporization and IL thermal decomposition. These decomposition products have not been observed in situ during previous analytical vaporization studies of similar ILs. The ex situ preparation of TD products is therefore perfectly complimentary to in situ thermal stability measurements. Experimental parameters such as sample surface area to volume ratios and heating rates are consequently very important for ILs that show competitive vaporization and thermal decomposition. We have explained these experimental factors in terms of Langmuir evaporation and Knudsen effusion-like conditions, allowing us to draw together observations from previous studies to make sense of the literature on IL thermal stability. Hence, the design of experimental setups are crucial and previously overlooked experimental factors

Preparation and characterisation of high-density ionic liquids incorporating halobismuthate anions

A range of ionic liquids containing dialkylimidazolium cations and halobismuthate anions ([BiBrxClyIz]− and [Bi2BrxClyIz]−) were synthesised by combining dialkylimidazolium halide ionic liquids with bismuth(III) halide salts. The majority were room temperature liquids, all with very high densities. The neat ionic liquids and their mixtures with 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide were characterised using Densitometry, Viscometry, NMR Spectroscopy, Electrospray Ionisation Mass Spectrometry (ESI), Liquid Secondary Ion Mass Spectrometry (LSIMS), Matrix-assisted Laser Desorption/Ionization Mass Spectrometry (MALDI), X-Ray Photoelectron Spectroscopy (XPS) and Thermogravimetric Analysis (TGA), to establish their speciation and suitability for high-temperature applications

Highly efficient aqueous phase reduction of nitroarenes catalyzed by phosphine-decorated polymer immobilized ionic liquid stabilized PdNPs

Palladium nanoparticles stabilized by lightly cross-linked phosphine-decorated polymer immobilized ionic liquids (PIIL) and their PEGylated counterparts (PEGPIIL) are highly effective catalysts for the aqueous phase hydrogenation and sodium borohydride-based reduction of a wide range of nitroaromatic and heteroaromatic compounds under mild conditions with low catalyst loadings. Introduction of extensive cross-linking with tris(4-vinylphenyl)phosphine to isolate the phosphine-based heteroatom and limit the number of surface Pd⋯P interactions did not have a significant influence on catalyst performance. Comparative testing revealed PdNPs immobilized on lightly cross-linked phsophine-decoarted PEGylated polymer to be a highly efficient catalyst for the aqueous phase reduction of nitroarenes with a TON of 36 000 (TOF = 2580 h−1) for hydrogenation and a TON of 274 000 (TOF = 17 125 h−1) for transfer hydrogenation. Even though these reactions occur under diffusion control due the poor solubility of the substrate these values are the highest to be reported for the room temperature aqueous phase reduction of nitroarenes catalyzed by a nanoparticle-based system. A continuous flow reduction of nitrobenzene in a packed bed reactor operated over a period of 250 min with no sign of catalyst deactivation and the corresponding space-time-yield of 0.738 g L−1 min−1 is a marked improvement on that of 0.384 g L−1 min−1 obtained in batch. The same system also catalyzes a tandem Suzuki–Miyaura cross coupling-nitroarene reduction sequence to afford high yields of biaryl amine in an operationally straightforward single-pot procedure. This is a highly versatile protocol which will enable the aromatic nitro fragment to be introduced as a nitro-substituted aryl or heteroaryl halide and as such will lend itself to rapid diversification for the synthesis of a wide range of amines

Halometallate ionic liquids: thermal properties, decomposition pathways, and life cycle considerations

Halometallate ionic liquids provide new opportunities for industrial catalytic processes because of their unique blend of physical and chemical properties. Tunability underpins the success of ionic liquids because small structural changes can have drastic effects on either property. Catalysis can be optimised by adjusting structures to target properties such as Lewis basicity and acidity, but the structural changes have simultaneous impacts on physical properties. In this work, we provide a thorough, methodical, and reliable list of thermal parameters to help define temperature limits to prevent catalyst poisoning and limit the need to replace costly and environmentally demanding solvents. Mechanistic insights show that decomposition is particularly detrimental for halometallate ionic liquids, and life cycle analysis highlights that lower levels of organic cations are better for economic and environmental sustainability

Understanding X-ray photoelectron spectra of ionic liquids: experiments and simulations of 1-butyl-3-methylimidazolium thiocyanate

We demonstrate a combined experimental and computational approach to probe the electronic structure and atomic environment of an ionic liquid, based on core level binding energies. The 1-butyl-3-methylimidazolium thiocyanate [C4C1Im][SCN] ionic liquid was studied using ab initio molecular dynamics, and results were compared against previously published and new experimental X-ray photoelectron spectroscopy (XPS) data. The long-held assumption that initial-state effects in XPS dominate the measured binding energies is proven correct, which validates the established premise that the ground state electronic structure of the ionic liquid can be inferred directly from XPS measurements. A regression model based upon site electrostatic potentials and intramolecular bond lengths is shown to account accurately for variations in core-level binding energies within the ionic liquid, demonstrating the important effect of long-range interactions on the core levels and throwing into question the validity of traditional single ion pair ionic liquid calculations for interpreting XPS data

Zinc 1s valence-to-core X-ray emission spectroscopy of halozincate complexes

The Zn 1s valence-to-core (VtC) X-ray emission spectra of seven ionic liquids have been measured experimentally and simulated on the basis of time-dependent density-functional theory (TDDFT) calculations. Six of the ionic liquids were made by mixing [C8C1Im]X and Zn(II)X2 at three different ZnX2 mole fractions (0.33, 0.50, or 0.67) for X = Cl or Br, and a further ionic liquid was made by mixing [P6,6,6,14]Cl and a mole fraction of ZnCl2 of 0.33. Calculations were performed for the [ZnX4] 2−, [Zn2X6] 2−, and [Zn4X10] 2− ions to capture the expected metal complex speciation. The VtC emission spectra showed three bands arising from singleelectron processes that can be assigned to emission from ligand p-type orbitals, zinc d-orbitals, and ligand s-type orbitals. For all seven ionic liquids, the highest occupied molecular orbital arises from the ligand p orbitals, and the spectra for the different size metal complexes for the same X were found to be very similar, in terms of both relative peak intensities and peak energies. For both experiments and TDDFT calculations, there was an energy difference of 0.5 eV between the Cl-based and Br-based metal complexes for the ligand s and p orbitals, while the Zn 3d orbital energies were relatively unaffected by the identity of the ligand. The TDDFT calculations find that for the ions with symmetrically equivalent zinc atoms ([Zn2X6] 2− and [Zn4X10] 2−), the most appropriate core-ionized reference state has a core-hole that is localized on a single zinc atom. In this framework, the spectra for the larger ions can be viewed as a sum of spectra for the tetrahedral complex with a single zinc atom with small variations in the structure of the coordinating ligands. Because the spectra are relatively insensitive to small changes in the geometry of the ligands, this is consistent with the small variation in the spectra measured in the experiment

Highly selective and solvent-dependent reduction of Nitrobenzene to N-phenylhydroxylamine, azoxybenzene, and aniline catalyzed by phosphino-modified polymer immobilized ionic liquid-stabilized AuNPs

Gold nanoparticles stabilized by phosphine-decorated polymer immobilized ionic liquids (AuNP@PPh2-PIILP) is an extremely efficient multiproduct selective catalyst for the sodium borohydride-mediated reduction of nitrobenzene giving N-phenylhydroxylamine, azoxybenzene, or aniline as the sole product under mild conditions and a very low catalyst loading. The use of a single nanoparticle-based catalyst for the partial and complete reduction of nitroarenes to afford three different products with exceptionally high selectivities is unprecedented. Under optimum conditions, thermodynamically unfavorable N-phenylhydroxylamine can be obtained as the sole product in near quantitative yield in water, whereas a change in reaction solvent to ethanol results in a dramatic switch in selectivity to afford azoxybenzene. The key to obtaining such a high selectivity for N-phenylhydroxylamine is the use of a nitrogen atmosphere at room temperature as reactions conducted under an inert atmosphere occur via the direct pathway and are essentially irreversible, while reactions in air afford significant amounts of azoxy-based products by virtue of competing condensation due to reversible formation of N-phenylhydroxylamine. Ultimately, aniline can also be obtained quantitatively and selectively by adjusting the reaction temperature and time accordingly. Introduction of PEG onto the polyionic liquid resulted in a dramatic improvement in catalyst efficiency such that N-phenylhydroxylamine could be obtained with a turnover number (TON) of 100 000 (turnover frequency (TOF) of 73 000 h–1, with >99% selectivity), azoxybenzene with a TON of 55 000 (TOF of 37 000 h–1 with 100% selectivity), and aniline with a TON of 500 000 (TOF of 62 500 h–1, with 100% selectivity). As the combination of ionic liquid and phosphine is required to achieve high activity and selectivity, further studies are currently underway to explore whether interfacial electronic effects influence adsorption and thereby selectivity and whether channeling of the substrate by the electrostatic potential around the AuNPs is responsible for the high activity. This is the first report of a AuNP-based system that can selectively reduce nitroarenes to either of two synthetically important intermediates as well as aniline and, in this regard, is an exciting discovery that will form the basis to develop a continuous flow process enabling facile scale-up

Direct synthesis of multiplexed metal nanowire based devices using carbon nanotubes as vector templates

We present the synthesis of metal nanowires in a multiplexed device configuration using single‐walled carbon nanotubes (SWNTs) as nanoscale vector templates. The SWNT templates control the dimensionality of the wires, allowing precise control of their size, shape and orientation; moreover a solution processable approach enables their linear deposition between specific electrode pairs in electronic devices. Electrical characterizations demonstrate the successful fabrication of metal nanowire electronic devices, while multiscale characterization of the different fabrication steps reveals details of the structure and charge transfer between the material encapsulated and the carbon nanotube. Overall the strategy presented allows facile, low‐cost and direct synthesis of multiplexed metal nanowire devices for nanoelectronic applications