662 research outputs found
Sexual dimorphisms in the dermal denticles of thelesser-spotted catshark, Scyliorhinus canicula (Linnaeus, 1758)
The dermal layers of several elasmobranch species have been shown to be sexually dimorphic. Generally, when this occurs the females have thicker dermal layers compared to those of males. This sexual dimorphism has been suggested to occur as a response to male biting during mating. Although male biting as a copulatory behaviour in Scyliorhinus canicula has been widely speculated to occur, only relatively recently has this behaviour been observed. Male S. canicula use their mouths to bite the female's pectoral and caudal fins as part of their pre-copulatory behaviour and to grasp females during copulation. Previous work has shown that female S. canicula have a thicker epidermis compared to that of males. The structure of the dermal denticles in females may also differ from that of males in order to protect against male biting or to provide a greater degree of friction in order to allow the male more purchase. This study reveals that the length, width and density of the dermal denticles of mature male and female S. canicula are sexually dimorphic across the integument in areas where males have been observed to bite and wrap themselves around females (pectoral fin, area posterior to the pectoral fin, caudal fin, and pelvic girdle). No significant differences in the dermal denticle dimensions were found in other body areas examined (head, dorsal skin and caudal peduncle). Sexually dimorphic dermal denticles in mature S. canicula could be a response to male biting/wrapping as part of the copulatory process
Development of a novel clinical scoring system for on-farm diagnosis of bovine respiratory disease in pre-weaned dairy calves.
Several clinical scoring systems for diagnosis of bovine respiratory disease (BRD) in calves have been proposed. However, such systems were based on subjective judgment, rather than statistical methods, to weight scores. Data from a pair-matched case-control study on a California calf raising facility was used to develop three novel scoring systems to diagnose BRD in preweaned dairy calves. Disease status was assigned using both clinical signs and diagnostic test results for BRD-associated pathogens. Regression coefficients were used to weight score values. The systems presented use nasal and ocular discharge, rectal temperature, ear and head carriage, coughing, and respiratory quality as predictors. The systems developed in this research utilize fewer severity categories of clinical signs, require less calf handling, and had excellent agreement (Kappa > 0.8) when compared to an earlier scoring system. The first scoring system dichotomized all clinical predictors but required inducing a cough. The second scoring system removed induced cough as a clinical abnormality but required distinguishing between three levels of nasal discharge severity. The third system removed induced cough and forced a dichotomized variable for nasal discharge. The first system presented in this study used the following predictors and assigned values: coughing (induced or spontaneous coughing, 2 points), nasal discharge (any discharge, 3 points), ocular discharge (any discharge, 2 points), ear and head carriage (ear droop or head tilt, 5 points), fever (≥39.2°C or 102.5°F, 2 points), and respiratory quality (abnormal respiration, 2 points). Calves were categorized "BRD positive" if their total score was ≥4. This system correctly classified 95.4% cases and 88.6% controls. The second presented system categorized the predictors and assigned weights as follows: coughing (spontaneous only, 2 points), mild nasal discharge (unilateral, serous, or watery discharge, 3 points), moderate to severe nasal discharge (bilateral, cloudy, mucoid, mucopurlent, or copious discharge, 5 points), ocular discharge (any discharge, 1 point), ear and head carriage (ear droop or head tilt, 5 points), fever (≥39.2°C, 2 points), and respiratory quality (abnormal respiration, 2 points). Calves were categorized "BRD positive" if their total score was ≥4. This system correctly classified 89.3% cases and 92.8% controls. The third presented system used the following predictors and scores: coughing (spontaneous only, 2 points), nasal discharge (any, 4 points), ocular discharge (any, 2 points), ear and head carriage (ear droop or head tilt, 5 points), fever (≥39.2°C, 2 points), and respiratory quality (abnormal respiration, 2 points). Calves were categorized "BRD positive" if their total score was ≥5. This system correctly classified 89.4% cases and 90.8% controls. Each of the proposed systems offer few levels of clinical signs and data-based weights for on-farm diagnosis of BRD in dairy calves
A framework for design engineering education in a global context
This paper presents a framework for teaching design engineering in a global context using innovative technologies to enable distributed teams to work together effectively across international and cultural boundaries. The DIDET Framework represents the findings of a 5-year project conducted by the University of Strathclyde, Stanford University and Olin College which enhanced student learning opportunities by enabling them to partake in global, team based design engineering projects, directly experiencing different cultural contexts and accessing a variety of digital information sources via a range of innovative technology. The use of innovative technology enabled the formalization of design knowledge within international student teams as did the methods that were developed for students to store, share and reuse information. Coaching methods were used by teaching staff to support distributed teams and evaluation work on relevant classes was carried out regularly to allow ongoing improvement of learning and teaching and show improvements in student learning. Major findings of the 5 year project include the requirement to overcome technological, pedagogical and cultural issues for successful eLearning implementations. The DIDET Framework encapsulates all the conclusions relating to design engineering in a global context. Each of the principles for effective distributed design learning is shown along with relevant findings and suggested metrics. The findings detailed in the paper were reached through a series of interventions in design engineering education at the collaborating institutions. Evaluation was carried out on an ongoing basis and fed back into project development, both on the pedagogical and the technological approaches
Recommended from our members
Comparative effectiveness trial comparing MyPlate to calorie counting for mostly low-income Latino primary care patients of a federally qualified community health center: study design, baseline characteristics.
BackgroundPrimary care-based behavior change obesity treatment has long featured the Calorie restriction (CC), portion control approach. By contrast, the MyPlate-based obesity treatment approach encourages eating more high-satiety/high-satiation foods and requires no calorie-counting. This report describes study methods of a comparative effectiveness trial of CC versus MyPlate. It also describes baseline findings involving demographic characteristics and their associations with primary outcome measures and covariates, including satiety/satiation, dietary quality and acculturation.MethodsA comparative effectiveness trial was designed to compare the CC approach (n = 130) versus a MyPlate-based approach (n = 131) to treating patient overweight. Intervenors were trained community health workers. The 11 intervention sessions included two in-home health education sessions, two group education sessions, and seven telephone coaching sessions. Questionnaire and anthropometric assessments occurred at baseline, 6- and 12 months; food frequency questionnaires were administered at baseline and 12 months. Participants were overweight adult primary care patients of a federally qualified health center in Long Beach, California. Two measures of satiety/satiation and one measure of post-meal hunger comprised the primary outcome measures. Secondary outcomes included weight, waist circumference, blood pressure, dietary quality, sugary beverage intake, water intake, fruit and vegetable fiber intake, mental health and health-related quality of life. Covariates included age, gender, nativity status (U.S.-born, not U.S.-born), race/ethnicity, education, and acculturation.AnalysisBaseline characteristics were compared using chi square tests. Associations between covariates and outcome measures were evaluated using multiple regression and logistic regression.ResultsTwo thousand eighty-six adult patients were screened, yielding 261 enrollees who were 86% Latino, 8% African American, 4% White and 2% Other. Women predominated (95%). Mean age was 42 years. Most (82%) were foreign-born; 74% chose the Spanish language option. Mean BMI was 33.3 kg/m2; mean weight was 82 kg; mean waist circumference was 102 cm. Mean blood pressure was 122/77 mm. Study arms on key baseline measures did not differ except on dietary quality and sugary beverage intake. Nativity status was significantly associated with dietary quality.ConclusionsThe two treatment arms were well-balanced demographically at baseline. Nativity status is inversely related to dietary quality.Trial registrationNCT02514889 , posted on 8/4/2015
Recommended from our members
Agreement between bovine respiratory disease scoring systems for pre-weaned dairy calves.
Clinical scoring systems have been proposed for respiratory disease diagnosis in calves, including the Wisconsin (WI) system (McGuirk in 2008) which uses five clinical signs, each partitioned into four levels of severity. Recently, we developed the California (CA) bovine respiratory disease (BRD) scoring system requiring less calf handling and consisting of six clinical signs, each classified as normal or abnormal. The objective of this study was to estimate the on-farm agreement between the WI and the CA scoring systems. A total of 100 calves were enrolled on a CA dairy and assessed for BRD case status using the two scoring systems simultaneously. The Kappa coefficient of agreement between these two systems was estimated to be 0.85, which indicated excellent agreement beyond chance. The simpler design and reduced calf handling required by the CA BRD scoring system may make it advantageous for on-farm use
A stabilizer framework for Contextual Subspace VQE and the noncontextual projection ansatz
Quantum chemistry is a promising application for noisy intermediate-scale
quantum (NISQ) devices. However, quantum computers have thus far not succeeded
in providing solutions to problems of real scientific significance, with
algorithmic advances being necessary to fully utilise even the modest NISQ
machines available today. We discuss a method of ground state energy estimation
predicated on a partitioning the molecular Hamiltonian into two parts: one that
is noncontextual and can be solved classically, supplemented by a contextual
component that yields quantum corrections obtained via a Variational Quantum
Eigensolver (VQE) routine. This approach has been termed Contextual Subspace
VQE (CS-VQE), but there are obstacles to overcome before it can be deployed on
NISQ devices. The problem we address here is that of the ansatz - a
parametrized quantum state over which we optimize during VQE. It is not
initially clear how a splitting of the Hamiltonian should be reflected in our
CS-VQE ans\"atze. We propose a 'noncontextual projection' approach that is
illuminated by a reformulation of CS-VQE in the stabilizer formalism. This
defines an ansatz restriction from the full electronic structure problem to the
contextual subspace and facilitates an implementation of CS-VQE that may be
deployed on NISQ devices. We validate the noncontextual projection ansatz using
a quantum simulator, with results obtained herein for a suite of trial
molecules.Comment: 42 pages, 4 figure
Benchmarking Noisy Intermediate Scale Quantum Error Mitigation Strategies for Ground State Preparation of the HCl Molecule
Due to numerous limitations including restrictive qubit topologies, short
coherence times and prohibitively high noise floors, few quantum chemistry
experiments performed on existing noisy intermediate-scale quantum hardware
have achieved the high bar of chemical precision, namely energy errors to
within 1.6 mHa of full configuration interaction. To have any hope of doing so,
we must layer contemporary resource reduction techniques with best-in-class
error mitigation methods; in particular, we combine the techniques of qubit
tapering and the contextual subspace variational quantum eigensolver with
several error mitigation strategies comprised of measurement-error mitigation,
symmetry verification, zero-noise extrapolation and dual-state purification. We
benchmark these strategies across a suite of eight 27-qubit IBM Falcon series
quantum processors, taking preparation of the HCl molecule's ground state as
our testbed.Comment: 18 pages, 15 figures, 4 tables, supplementary GitHub repository:
https://github.com/TimWeaving/quantum-error-mitigatio
- …