Surgical Application of Human Amniotic Membrane and Amnion-Chorion Membrane in the Oral Cavity and Efficacy Evaluation: Corollary With Ophthalmological and Wound Healing Experiences

Due to its intrinsic properties, there has been growing interest in human amniotic membrane (hAM) in recent years particularly for the treatment of ocular surface disorders and for wound healing. Herein, we investigate the potential use of hAM and amnion-chorion membrane (ACM) in oral surgery. Based on our analysis of the literature, it appears that their applications are very poorly defined. There are two options: implantation or use as a cover material graft. The oral cavity is submitted to various mechanical and biological stimulations that impair membrane stability and maintenance. Thus, some devices have been combined with the graft to secure its positioning and protect it in this location. This current opinion paper addresses in detail suitable procedures for hAM and ACM utilization in soft and hard tissue reconstruction in the oral cavity. We address their implantation and/or use as a covering, storage format, application side, size and number, multilayer use or folding, suture or use of additional protective covers, re-application and resorption/fate. We gathered evidence on pre- and post-surgical care and evaluation tools. Finally, we integrated ophthalmological and wound healing practices into the collected information. This review aims to help practitioners and researchers better understand the application of hAM and ACM in the oral cavity, a place less easily accessible than ocular or cutaneous surfaces. Additionally, it could be a useful reference in the generation of new ideas for the development of innovative protective covering, suturing or handling devices in this specific indication. Finally, this overview could be considered as a position paper to guide investigators to fulfill all the identified criteria in the future

Epidemiology of maxillofacial trauma in the elderly: a European multicenter study

ABSTRACT Introduction: The progressive aging of European population seems to determine a change in the epidemiology, incidence and etiology of maxillofacial fractures with an increase in the frequency of old patients sustaining craniofacial trauma. The objective of the present study was to assess the demographic variables, causes, and patterns of facial fractures in elderly population (with 70 years or more). Materials and Methods: The data from all geriatric patients (70 years or more) with facial fractures between January 1, 2013, and December 31, 2017, were collected. The following data were recorded for each patient: gender, age, voluptuary habits, comorbidities, etiology, site of facial fractures, synchronous body injuries, Facial Injury Severity Score (FISS). Results: A total of 1334 patients (599 male and 735 female patients) were included in the study. Mean age was 79.3 years, and 66% of patients reported one or more comorbidities. The most frequent cause of injury was fall and zygomatic fractures were the most frequently observed injuries. Falls were associated with a low FISS value (p<.005). Concomitant injuries were observed in 27.3% of patients. Falls were associated with the absence of concomitant injuries. The ninth decade (p <.05) and a high FISS score (p <.005) were associated with concomitant body injuries too. Conclusions: This study confirms the role of falls in the epidemiology of facial trauma in the elderly, but also highlights the frequency of involvement of females, and the high frequency of zygomatic fractures.Peer reviewe

Central giant-cell granuloma located in the mandibular symphyseal region of a child

Introduction: Central giant-cell granuloma (CGCG) is a rare mandibular tumor. The originality of this case lies in its clinical presentation, with a delay in treatment despite a significant aesthetic impact. Observation: An 8-year-old boy whose chin had been swelling for three (3) months was referred to have a consultation. The medical imaging examination revealed a well-defined osteolytic lesion of about 3 cm and round in shape. The lesion was surgically treated by enucleation. The anatomopathological examination provided evidence of a CGCG. Conclusion: Postoperative period was aesthetically acceptable, there were no nervous or dental lesions and no relapse at the 6-month follow-up

3D printing as a pedagogical tool for teaching normal human anatomy: a systematic review

Abstract Background Three-dimensional-printed anatomical models (3DPAMs) appear to be a relevant tool due to their educational value and their feasibility. The objectives of this review were to describe and analyse the methods utilised for creating 3DPAMs used in teaching human anatomy and for evaluating its pedagogical contribution. Methods An electronic search was conducted on PubMed using the following terms: education, school, learning, teaching, learn, teach, educational, three-dimensional, 3D, 3-dimensional, printing, printed, print, anatomy, anatomical, anatomically, and anatomic. Data retrieved included study characteristics, model design, morphological evaluation, educational performance, advantages, and disadvantages. Results Of the 68 articles selected, the cephalic region was the most studied (33 articles); 51 articles mentioned bone printing. In 47 articles, the 3DPAM was designed from CT scans. Five printing processes were listed. Plastic and its derivatives were used in 48 studies. The cost per design ranged from 1.25 USD to 2800 USD. Thirty-seven studies compared 3DPAM to a reference model. Thirty-three articles investigated educational performance. The main advantages were visual and haptic qualities, effectiveness for teaching, reproducibility, customizability and manipulability, time savings, integration of functional anatomy, better mental rotation ability, knowledge retention, and educator/student satisfaction. The main disadvantages were related to the design: consistency, lack of detail or transparency, overly bright colours, long printing time, and high cost. Conclusion This systematic review demonstrates that 3DPAMs are feasible at a low cost and effective for teaching anatomy. More realistic models require access to more expensive 3D printing technologies and substantially longer design time, which would greatly increase the overall cost. Choosing an appropriate image acquisition modality is key. From a pedagogical viewpoint, 3DPAMs are effective tools for teaching anatomy, positively impacting the learning outcomes and satisfaction level. The pedagogical effectiveness of 3DPAMs seems to be best when they reproduce complex anatomical areas, and they are used by students early in their medical studies

Does Penicillin Allergy Increase the Risk of Surgical Site Infection after Orthognathic Surgery? A Multivariate Analysis

This study aimed to demonstrate an association between the occurrence of surgical site infection (SSI) after orthognathic surgery and penicillin allergy and to assess whether other factors could be associated with the occurrence of SSI. A 10-year monocentric retrospective study was conducted to identify possible risk factors for SSI in orthognathic surgery. Bivariate analyses were performed using Fisher, Student, or Wilcoxon tests and multivariate analyses using logistic regression. Two hundred and sixty-six patients were included, and 3.5% had SSI. Bivariate analyses revealed a significant association between SSI and age at surgery (p = 0.01), penicillin allergy (p = 0.02), and postoperative antibiotic therapy by Clindamycin (Dalacine&reg;) (p = 0.02). Multivariate analyses confirmed the association between the occurrence of SSI and treatment with Clindamycin (Dalacine&reg;) or Clindamycin (Dalacine&reg;) and Metronidazole (Flagyl&reg;) postoperatively (p = 0.04). Antibiotic therapy with Clindamycin (Dalacine&reg;) seems to be associated with a higher rate of SSI, and the mandible was the only site affected by SSI

Severity and long-term complications of surgical site infections after orthognathic surgery: a retrospective study

International audienceAbstract Surgical site infections (SSI) occur in 1.4% to 33.4% of cases after orthognathic surgery. This type of complication is a major concern to surgical teams, but there is no consensus for the prevention and treatment of SSI in orthognathic surgery. The purpose of this descriptive study was to evaluate the severity and the consequences of postoperative infections. The charts of all the patients operated on by the orthognathic surgery team between January 2015 and July 2017 were collected. All types of orthognathic procedures (Le Fort I maxillary osteotomy, bilateral sagittal split mandibular osteotomy, and genioplasty) were screened, and patients diagnosed with SSI were included. Demographic data, timing and severity of the infection, as well as long-term complications were recorded. Five hundred and twelve patients were screened. Forty-one patients (8%) presenting with SSI were included. There were 18 men and 23 women. The site of the infection was mandibular for 38 patients (92.7%) and maxillary for 3 patients (7.3%). The average time between surgery and infection was 31.5 days. Twenty-four patients received isolated oral antibiotics for inflammatory cellulitic reaction (58.8%), 15 patients had a localized collection treated by incision and drainage under local anesthesia (36.6%), and 2 patients had an extensive collection requiring surgical drainage under general anesthesia (4.9%). Five patients (12.2%) needed hardware removal for plate loosening, and 2 patients (4.9%) developed chronic osteomyelitis. Infection following orthognathic surgery is easily treated most of the time with no long-term complications. In cases of patients with potential risk factors for severe infection, antibiotics may be given with curative intents

Severity and long-term complications of surgical site infections after orthognathic surgery: a retrospective study

International audienceAbstract Surgical site infections (SSI) occur in 1.4% to 33.4% of cases after orthognathic surgery. This type of complication is a major concern to surgical teams, but there is no consensus for the prevention and treatment of SSI in orthognathic surgery. The purpose of this descriptive study was to evaluate the severity and the consequences of postoperative infections. The charts of all the patients operated on by the orthognathic surgery team between January 2015 and July 2017 were collected. All types of orthognathic procedures (Le Fort I maxillary osteotomy, bilateral sagittal split mandibular osteotomy, and genioplasty) were screened, and patients diagnosed with SSI were included. Demographic data, timing and severity of the infection, as well as long-term complications were recorded. Five hundred and twelve patients were screened. Forty-one patients (8%) presenting with SSI were included. There were 18 men and 23 women. The site of the infection was mandibular for 38 patients (92.7%) and maxillary for 3 patients (7.3%). The average time between surgery and infection was 31.5 days. Twenty-four patients received isolated oral antibiotics for inflammatory cellulitic reaction (58.8%), 15 patients had a localized collection treated by incision and drainage under local anesthesia (36.6%), and 2 patients had an extensive collection requiring surgical drainage under general anesthesia (4.9%). Five patients (12.2%) needed hardware removal for plate loosening, and 2 patients (4.9%) developed chronic osteomyelitis. Infection following orthognathic surgery is easily treated most of the time with no long-term complications. In cases of patients with potential risk factors for severe infection, antibiotics may be given with curative intents

Highly Structured 3D Electrospun Conical Scaffold: A Tool for Dental Pulp Regeneration

New procedures envisioned for dental pulp regeneration after pulpectomy include cell homing strategy. It involves host endogenous stem cell recruitment and activation. To meet this cell-free approach, we need to design a relevant scaffold to support cell migration from tissues surrounding the dental root canal. A composite membrane made of electrospun poly(lactic acid) nanofibers and electrosprayed polycaprolactone with tannic acid (TA) microparticles which mimics the architecture of the extracellular matrix was first fabricated. After rolling the membrane in the form of a 3D conical scaffold and subsequently coating it with gelatin, it can be directly inserted into the root canal. The porous morphology of the construct was characterized by SEM at different length scales. It was shown that TA was released from the 3D conical scaffold after 2 days in PBS at 37 °C. Biocompatibility studies were first assessed by seeding human dental pulp stem cells (DPSCs) on planar membranes coated or not coated with gelatin to compare the surfaces. After 24 h, the results highlighted that the gelatin-coating increased the membrane biocompatibility and cell viability. Similar DPSC morphology and proliferation on both membrane surfaces were observed. The culture of DPSCs on conical scaffolds showed cell colonization in the whole cone volume, proving that the architecture of the conical scaffold was suitable for cell migration